Delta LCP-1250A4FSR - Manual
Delta LCP-1250A4FSR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; Electrical Characteristics; Transmitter; Receiver
- Page 3 – Mask of the eye diagram for the optical transmit signal
- Page 5 – Nov., 2006; SFP Transceiver Electrical Pad Layout
- Page 7 – Recommend Circuit Schematic; SerDes IC; * Depands on SerDes IC used
- Page 8 – Package Outline Drawing for Metal Housing with Bail de-latch
- Page 9 – SFP timing parameters for SFP management; Parameter Symbol
- Page 10 – SFP timing parameters; SFP TX_DISABLE timing during normal operation.
- Page 12 – Regulatory Compliance
- Page 13 – Ordering information for SFP modules; SRX; Related Product
DELTA ELECTRONICS, INC.
1
Nov., 2006
Rev. 0
C
www.deltaww.com
RoHS Compliant Small Form Factor Pluggable Transceiver for Gigabit
Ethernet and Fiber Channel
FEATURES
z
Compliant with SFP Transceiver MSA
specification
z
Compliant with Specifications for IEEE
802.3z/Gigabit Ethernet
z
LCP-1250Bxxx compliant with the 1.0625GBd
Fiber Channel 100-SM-LC-L FC-PI Rev.13
z
LCP-1250Axxx compliant with the 1.0625GBd
Fiber Channel FC-PI 100-M5-SN-I Rev.13
z
Compliant with Industry Standard RFT
Electrical Connector and Cage
z
Single + 3.3V Power Supply and TTL Logic
Interface
z
EEPROM with Serial ID Functionality
z
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
z
Duplex LC Connector interface
Description
The LCP-1250xxxx series are hot pluggable
3.3V Small-Form-Factor transceiver module
designed expressly for high-speed
communication applications that require rates of
up to 1.25Gbit/sec. It is compliant with the Gigabit
Ethernet standards, as well as the SFP
Multisource Agreement (MSA).
The LCP-1250xxxx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage.
The post-amplifier of the LCP-1250xxxx also
includes a LOS (Loss Of Signal) circuit that
provides a TTL logic-high output when an
unusable optical signal level is detected.
The LCP-1250xxxx transceiver is a Class 1
eye safety product. The optical power levels,
under normal operation, are at eye safe level.
Applications
z
Gigabit Ethernet
z
Fibre channel
z
Switch to Switch interface
z
Switched backplane applications
z
File server interface
Performance
z
LCP-1250A4FSxx Data Link up to 550m in
50/125
μ
m Multi Mode Fiber
z
LCP-1250B4QSxx Data Link up to 10km in
9/125
μ
m Single Mode Fiber
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DELTA ELECTRONICS, INC. 2 Nov., 2006 Rev. 0 C www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Supply Voltage V CC 0 5 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Case Operating Temperature T C -5 70 ...
DELTA ELECTRONICS, INC. 3 Nov., 2006 Rev. 0 C www.deltaww.com Optical Characteristics (LCP-1250A4FSR) (V CC =3.135V to 3.465V, Data Rate=1.25Gb/sec, PRBS=2 7 -1 NRZ, 50/125 μ m MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -9 -3 dBm Optical Extinction Rat...
DELTA ELECTRONICS, INC. 5 Nov., 2006 Rev. 0 C www.deltaww.com SFP Transceiver Electrical Pad Layout Pin Function Definitions Pin Num. Name Function Plug Seq. Notes 1 VeeT Transmitter Ground 1 2 TX Fault Transmitter Fault Indication 3 Note 1 3 TX Disable Transmitter Disable 3 Note 2 Module disables o...
