Delta 78-907) - Manual
Delta 78-907) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – A S S E M B LY INSTRUCTIONS
- Page 10 – F E N C E O P E R ATION
- Page 12 – LUBRICATION; Delta Machinery; Biesemeyer
INSTRUCTION
MANUAL
D AT E D 3-5-96
PA RT NO. 1349984
'Delta International Machinery Corp. 1996
Biesemeyer
fi
T-Square
fi
Commercial Fence Systems
50
Capacity (Model 78-904)
30
Capacity (Model 78-907)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Fig. 4 If you purchased the accessory leg kit (model 78-952) for use with the right extension table, Figure 4 illustrates the legs and loose items supplied with this accessory. 1 - Legs (2) 2 - 5/8 long wood screws #8 (8) 3 - 1/4-20 x 1-1/2 long flat head Phillips screws (4) 4 - 1/4 flat washers (4)...
Fig. 24 Fig. 25 Fig. 26 F E N C E O P E R ATION I M P O R TA N T: Before operating fence, make sure the fence is adjusted parallel to the miter gage slot, as explained later on in this manual . 1. To move the fence along the guide rail, simply lift up clamp lever (A) as shown in Fig. 24, slide fence...
LUBRICATION 1. Apply paste wax to fence and guide tube sliding sur- faces weekly. Also, saw table and extension table surface should be waxed often. 2. Apply grease to cam lock (A) Fig. 31, and cam foot (B) occasionally to prevent wear. Fig. 31 Delta will repair or replace, at its expense and at its...
