Delta 6A Series - Manual
Delta 6A Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TECHNICAL SPECIFICATIONS; PARAMETER
- Page 3 – ELECTRICAL CHARACTERISTICS CURVE; Converter efficiency vs. output current
- Page 5 – Typical transient response to step load change at
- Page 6 – DESIGN CONSIDERATIONS; the signal is driven low (below; FEATURES DESCRIPTIONS; Undervoltage Lockout; efault turn-on voltage is 3.1V with 300mV; is the turn-off threshold; is the turn-on threshold; Enable
- Page 7 – Over-Current and Short-Circuit Protection; Trimming Output Voltage; Vout; Output Voltage; Typical trim resistor values
- Page 8 – Input reflected ripple/ capacitor ripple current and; Voltage Margining Adjustment; the Trim pin to the Ground for margining; Circuit configuration for output voltage margining; Paralleling
- Page 9 – Output current vs. ambient temperature and air; THERMAL CONSIDERATION; Thermal Testing Setup; Wind tunnel test setup figure dimensions are in
- Page 13 – MECHANICAL DRAWING; VERTICAL
- Page 14 – WARRANTY
DATASHEET
DS_NE12S06A_06302008
FEATURES
High Efficiency: 94.5% @ 12Vin, 5V/6A out
Size: Vertical :
10.4mm x 16.5mm x 11.0 mm
(0.41” × 0.65” × 0.43”)
Horizontal:
10.4mm x 16.5mm x 11.5 mm
(0.41” × 0.65” × 0.45”)
Wide input range: 3.1V~13.8V
Output voltage programmable from
0.59Vdc to 5.1Vdc via external resistors
No minimum load required
Fixed
frequency
operation
Input UVLO, output OCP
Remote ON/OFF (Positive, 5 pin version)
ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing facility
UL/cUL 60950-1 (US & Canada)
Recognized, and TUV (EN60950-1) Certified
CE mark meets 73/23/EEC and 93/68/EEC
directives
APPLICATIONS
DataCom
Distributed power architectures
Servers
and
workstations
LAN/WAN
applications
Data processing applications
OPTIONS
Vertical or horizontal versions
Delphi NE Series Non-Isolated Point of Load
DC/DC Modules:
3.1~13.8Vin, 0.59V-5.1Vout, 6Aout
The Delphi NE 6A Series, 3.1~13.8V wide input, wide trim single
output, non-isolated point of load (POL) DC/DC converters are the
latest offering from a world leader in power systems technology and
manufacturing
—
Delta Electronics, Inc. The NE product family is
the second generation, non-isolated point-of-load DC/DC power
modules which cut the module size by almost 50% in most of the
cases compared to the first generation NC series POL modules. The
NE 6A product family provides an ultra wide input range to support
3.3V, 5V, 8V, 9.6V, and 12V bus voltage point-of-load applications and
it offers up to 6A of output current in a vertically or horizontally
mounted through-hole miniature package and the output can be
resistor trimmed from 0.59Vdc to 5.1Vdc. It provides a very cost
effective, high efficiency, and high density point of load solution. With
creative design technology and optimization of component
placement, these converters possess outstanding electrical and
thermal performance, as well as extremely high reliability under highly
stressful operating conditions.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DS_NE12S06A_06302008 2 TECHNICAL SPECIFICATIONS (Ambient Temperature=25°C, minimum airflow=200LFM, nominal V in =12Vdc unless otherwise specified.) PARAMETER NOTES and CONDITIONS NE12S0A0V/H06 Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage 3.1 13.8 Vdc Operating Temperature (Vertical) R...
DS_NE12S06A_06302008 3 ELECTRICAL CHARACTERISTICS CURVE Figure 1: Converter efficiency vs. output current (0.59V output voltage, 12V input voltage) Figure 2: Converter efficiency vs. output current (0.9V output voltage, 12V input voltage) Figure 3: Converter efficiency vs. output current (1.8V outpu...
DS_NE12S06A_06302008 5 ELECTRICAL CHARACTERISTICS CURVES (CON.) Figure 13: Turn on delay time at 12Vin, 1.0V/6A out Ch1: Vin Ch4: Vout Figure 14: Turn on delay time Remote On/Off, 1.5V/6A out Ch1:Enable Ch4: Vout Figure 15: Turn on delay time at 12Vin, 2.5V/6A out Ch1: Vin Ch4: Vout Figure 16: Turn ...
