Delta 28-280 - Manual
Delta 28-280 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY RULES; WARNING: FAILURE TO FOLLOW THESE RULES
- Page 3 – UNPACKING AND CLEANING; ASSEMBLY; STAND; ASSEMBLING MOTOR TO STAND
- Page 5 – ASSEMBLING SWITCH
INSTRUCTION
MANUAL
DATED 1-15-96
PART NO. 426-02-651-0023
©Delta International Machinery Corp. 1996
14"
Wood Cutting
Band Saw
(Model 28-280)
The Serial No./Model No. plate is attached to the
right side of the base casting. Locate this plate and
record the Serial No. and Model No. in your manual
for future reference.
SERIAL NO. ___________________________________
MODEL NO. __________________________________
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involvedwith the operation of the product. Using the machine with respect and caution will considerably lessen the possibility of personal injury. Ho...
3 UNPACKING AND CLEANING Carefully unpack the band saw and all loose items from the shipping container. Remove the protective coating fromthe machined surfaces of the band saw. This coating may be removed with a soft cloth moistened with kerosene (donot use acetone, gasoline or lacquer thinner for t...
5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 ASSEMBLING BELTAND PULLEY GUARD Assemble the belt and pulley guard (A) to the top of the stand,as shown in Fig. 6, using the two 1/4-20 x 1/2 hex head screws,washers and nuts (B). ASSEMBLING SWITCH If you purchased your band saw complete with stand and elec-tricals, you...
