Delta 23-880 - Manual
Delta 23-880 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY RULES; WARNING: FAILURE TO FOLLOW THESE RULES
- Page 3 – ADDITIONAL SAFETY RULES FOR GRINDERS; UNPACKING AND CLEANING
- Page 4 – ASSEMBLING TOOL RESTS; ASSEMBLY INSTRUCTIONS; ASSEMBLING SPARK GUARDS
- Page 5 – CONNECTING GRINDER TO POWER SOURCE; POWER CONNECTIONS; MOTOR SPECIFICATIONS
- Page 6 – EXTENSION CORDS; GROUNDING INSTRUCTIONS
8" and 10"
Bench Grinders
(Models 23-880 & 23-980)
The Serial No. and Model No. plate
is attached to the front of the
motor. Locate this plate and record
the Serial No. and Model No. in
your manual for future reference.
SERIAL NO.
MODEL NO.
INSTRUCTION
MANUAL
PART NO. 1345338
© Delta International Machinery Corp. 1995
Dated 8-11-95
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards involved with the operation of the product. Using the machine with respect and caution will consid-erably lessen the possiblity of personal injury. However, if norma...
ADDITIONAL SAFETY RULES FOR GRINDERS 1. WARNING: Do not operate your grinder until it is completely assembled and installed according to the instructions. 2. IF YOU ARE NOT thoroughly familiar with the operation of grinders, obtain advice from your supervisor, instructor or other qualified person. 3...
ASSEMBLING TOOL RESTS 1. Assemble adjustable tool rest (A) Fig. 1, to left side of tool rest arm (B), as shown, and fasten with one 3/4 inch-long hex head screw and lockwasher (C). Assemble theremaining tool rest to the right side of the other tool restarm in the same manner. Do not completely tight...
