DeLonghi KBZ2001BG - User Manual
DeLonghi KBZ2001BG Kettle – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – INTRODUCTION; Symbols used in these instructions; IMPORTANT SAFEGUARDS
- Page 5 – SERVICE AND CUSTOMER CARE; Using for the first time
- Page 6 – SAFETY DEVICES
- Page 7 – CLEANING AND MAINTENANCE; Cleaning the kettle
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia
2101002IDL
/11.13
Proudly distributed by
De’Longhi Australia Pty Limited
P.O. BOX 4540
CASULA MALL NSW 2170
Customer Service Ph: 1800 126 659
Fax: 1800 706932
www.delonghi.com.au
e-mail: [email protected]
De’Longhi New Zealand Limited
25 Carbine Road
Mt Wellington
Auckland, New Zealand
P.O. Box 58-056 Botany
MANUKAU 2163
Customer Service Ph: 0508 200 300
Fax: 0508 200 301
www.delonghi.com.nz
e-mail:[email protected]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 INTRODUCTION Thank you for choosing this De’Longhi kettle. To get the best results from your new kettle, read these instructions carefully and retain for future reference. This is the only way to ensure optimum results and maximum safety. Please read these instructions before operating and retain ...
4 Danger of burns!! • Do not touch hot surfaces i.e. body or lid. Use handles or knobs. • Avoid contact with steam coming out of the spout when pouring, and out of the lid or spout when refilling. Please note: • Ensure that your mains supply voltage is the same as that marked on the underside of you...
5 etc. • After the kettle has been rinsed out, refit the filter (fig.3). Using the kettle With the specially designed power base and central connector, you can now set the kettle on the base at any angle, from any position.• Release the cord from the storage base and adjust the length by winding aro...
