Dell UP2414Q Monitor- User Manual
Dell UP2414Q Monitor– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Month yyyy
Statement of Volatility – Dell UP2414Q
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell UP2414Q contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the XXXX system board.
Table 1. List of Non-Volatile Components on System Board
Description
Reference
Designator
Volatility Description
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
Serial Flash
ROM
W25Q16CV
I245 / I248 /
I251
Non-volatile Flash memory,
16M bit. To store firmware.
No
Part place on Interface Board,
it has hardware/software write
protected.
EEPROM
M24512
I246 / I249 /
I252
Non-volatile memory, 512k
bit. To store DP EDID,
HDCP and user adjust data.
No
Part place on Interface Board,
it has hardware/software write
protected.
DDR3
SDRAM
NT5CB64M
16FP-DH
I225 / I226 /
I227 / I228 /
I229 / I230
Volatile memory 1Gbit
(64Mbx16). To store video
data stream and firmware
code.
No
Part place on Interface Board.
EEPROM
24C02
I224
Non-volatile EEPROM 2Kbit.
To store HDMI EDID data.
No
Part place on Interface Board,
it has hardware/soft
ware write
protected.
Serial Flash
ROM
PM25LD020
I233
Non-volatile Flash ROM 2Mbit.
To store firmware.
No
Part place on Interface Board,
it has soft
ware write protected.
EEPROM
24C02
I240
Non-volatile EEPROM 2Kbit.
To store monitor DC on / off
store.
No
Part place on Interface Board,
it has soft
ware write protected.
CAUTION: All other components on the system board lose data if power is removed from the system. Primary power
loss (unplugging the power cord and removing the battery) destroys all user data on the memory (DDR3, 1067 MHz).
Secondary power loss (removing the on-board coin-cell battery) destroys system data on the system configuration
and time-of-day information.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
