Dell Samsung ML 1610 - Manual

Dell Samsung ML 1610

Dell Samsung ML 1610 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
Page: / 9

Table of Contents:

  • Page 2 – Page 2 of 9; Remanufacturing Instructions; The waste bin is held in place by a post
  • Page 3 – Page 3 of 9; Remove the two screws that hold the; Use a small flat screw driver to pry up the
  • Page 4 – Page 4 of 9; Remove the PCR by sliding it toward
  • Page 5 – Page 5 of 9; Remove the drum and replace during
  • Page 6 – Page 6 of 9; . Remove the developer roller and clean; Remove the two screws that secure the
  • Page 7 – Remove the doctor blade, clean; Page 7 of 9
  • Page 8 – Page 8 of 9; Replace or add (starter carts have no; Oasis and You ... Succeeding Together!
  • Page 9 – Page 9 of 9
Loading the manual

Remanufacturing Instructions

Dell 1100 / Samsung ML 1610


For Technical Support, please call Memphis, TN at (888) 757-0762 or Nashua, NH at (888) 627-6555.

© 1998 Oasis Imaging Products, Inc.

Page 1 of 9


Reference Information:

Oasis Products:

Dell # 3106640 Toner: D3TN1070
Samsung # ML1610 Drum: D3DR305
Wiper Blade: D3WB20

OEM Yields:

Fuse: 99FZ10

2000 @ 5% coverage























Remanufacturing Instructions

Dell 1100 / Samsung ML 1610

Technical Support

Memphis, TN (888) 757-0762

Nashua, NH (888) 627-6555

1.

On the end cap where the contacts are

located, remove the two screws that secure
the end cap (Fig. 1).

Fig. 1

2.

Using a small flat screw driver, release

the locking tab on the bottom side of the
end cap (Fig. 2).

Fig. 2

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Page 2 of 9; Remanufacturing Instructions; The waste bin is held in place by a post

© 1998 Oasis Imaging Products, Inc. Page 2 of 9 Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 Fig. 5 5. The waste bin is held in place by a post that sits in a slot on the end cap. Push the waste bin up towards the han...

Page 3 - Page 3 of 9; Remove the two screws that hold the; Use a small flat screw driver to pry up the

© 1998 Oasis Imaging Products, Inc. Page 3 of 9 6. Remove the two screws that hold the opposite end cap in place (Fig. 6). Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Fig. 6 Fig. 7 Fig. 8 7. Use a small flat screw driver to pry up the end cap to remove it (Fig. 7). Set...

Page 4 - Page 4 of 9; Remove the PCR by sliding it toward

© 1998 Oasis Imaging Products, Inc. Page 4 of 9 Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 Fig. 11 11. Remove the PCR by sliding it toward the gear end of the cartridge and lifting the post once clear from the Saddl...

Other Dell Models