Dell PowerVault NX1950- User Manual
Dell PowerVault NX1950– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – Introduction; The PowerVault NX1950 can be
- Page 4 – Operating System; iSCSI software initiator with ESX Server
- Page 5 – Select interface for storage requests; : On the NX1950 server, open the Microsoft iSCSI; Figure 2: Network selection to serve storage requests
- Page 6 – Figure 3: iSCSI software initiator tab on VI client
- Page 7 – Figure 5: iSCSI software initiator after initial configuration; Add; Figure 6: iSCSI software initiator properties window; Close
- Page 8 – click; Figure 7: iSCSI target creation wizard; Select Next to continue.; Figure 8: iSCSI initiator selection wizard; Finish
- Page 9 – Figure 9: Create virtual disk wizard
- Page 10 – Figure 10: iSCSI target and LUNs as visible through VI client
Dell PowerVault NX1950
configuration guide for
VMware® ESX Server software
January 2008
Dell | Global Solutions Engineering
Dell Inc.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents 1. Introduction..................................................................................................... 3 2. Architectural Setup ......................................................................................... 4 3. iSCSI Connectivity Support .....................
1. Introduction Dell™ PowerVault™ NX1950 is a unified network storage solution that simultaneously stores both file and application data while supporting a wide range of operating environments and communication protocols, including the iSCSI standard . The PowerVault NX1950 can be deployed as an i...
2. Architectural Setup The following figure illustrates a typical setup for using NX1950 in an ESX Server farm. As a best practice, Dell recommends using dedicated Gigabit Ethernet network to handle iSCSI storage traffic. Figure 1: Typical NX1950 storage solution architecture for VMware ESX Serv...
