Dell PowerVault DL4000- User Manual
Dell PowerVault DL4000– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Dell PowerVault Backup to Disk Appliance Interoperability Guide l
1
Dell™ PowerVault™ DL4000 Backup to Disk Appliance
Interoperability Guide
This document provides information about the supported hardware and software versions for the Dell
PowerVault™ Backup to Disk Appliance system.
NOTE:
The versions specified in this document use the same format as found on
and may differ
from the version information displayed in the Windows® Device Manager or Dell™ OpenManage™ Server Administrator.
Supported Hardware
This section lists the hardware supported by PowerVault DL4000 Backup to Disk Appliance systems. Where
applicable, firmware and driver versions are also listed.
BIOS Versions
System
BIOS Version
DL4000
1.2.6 or later
Hard Drives (Internal)
System
Internal RAID
Controller
Slots
Drive Type
RAID Level
DL4000
PERC H710P 0-1
Two (2) hot-swappable 2.5-inch SAS drives
1
2-9
Eight (2) hot-swappable 2.5-inch Nearline SAS drives
6
Storage Enclosures
Storage Enclosure
Firmware
Revision
Number of Enclosures Supported
PowerVault MD1200
1.0.1 or later
One (1)
NOTE:
To connect or disconnect the redundant SAS cable(s), the DL4000 system must be powered off.
Hard Drives (External)
Storage Enclosure
RAID Controller Drive Type
Drive Capacity
PowerVault MD1200
PERC H810
Nearline SAS
1TB , 2TB, 3TB
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
