Dell OptiPlex XE (Early 2010) Air-Ducts- Installation Manual
Dell OptiPlex XE (Early 2010) Air-Ducts– Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Slide the release latch and lift the computer cover.; release latch
- Page 3 – Insert the tabs on the front air-duct into the slots on the computer.
- Page 4 – Close the computer cover.; computer cover
- Page 5 – powered USB port
- Page 6 – Temperature and Mounting Recommendation; The maximum operating temperature of 55 °C is recommended for
About Warnings
WARNING:
A WARNING indicates a potential for property damage, personal injury,
or death.
Dell™ OptiPlex™ XE — Installing
Air-Ducts
You can install air-ducts on your Dell OptiPlex XE computer in a low-airflow
environment (like enclosed space) to ensure optimal performance. You can install
air-ducts on both the front and back of the computer.
WARNING:
Do not block, push objects into, or allow dust to accumulate in the air
vents. Restricting the airflow can damage the computer or cause a fire. The computer
turns on the fan when the computer gets hot. Fan noise is normal and does not indicate
a problem with the fan or the computer.
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the
electrical outlet before removing the computer cover.
NOTE:
To find more information about removing and replacing parts on the computer,
see the
Service Manual
available on the
support.dell.com/manuals
.
NOTE:
You will have access to external power button routing, but will not have access
to the optical drive, front USB ports, and the 24V USB port on the back of the computer.
January 2010
54350.fm Page 1 Monday, January 11, 2010 6:08 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Slide the release latch and lift the computer cover. 2 Gently pry open the front bezel retention tabs away from the computer and remove the front bezel. 1 release latch 2 computer cover 1 front bezel 1 2 1 54350.fm Page 2 Monday, January 11, 2010 6:08 PM
3 Insert the tabs on the front air-duct into the slots on the computer. 4 Rotate the front air-duct bezel towards the computer until it clicks into place. 1 front air-duct bezel 2 air-duct slots (4) 3 front air-duct 1 2 3 54350.fm Page 3 Monday, January 11, 2010 6:08 PM
5 Close the computer cover. 1 computer cover 2 front air-duct 1 2 54350.fm Page 4 Monday, January 11, 2010 6:08 PM