Dell M409WX - Manual

8 Connecting Your Projector Connecting a Computer NOTE: The USB cable is not provided by Dell. 1 Power cable 2 VGA to VGA cable 3 USB to USB cable 1 2 3 MOLEX

Connecting Your Projector 9 Connecting a DVD Player Connecting a DVD Player using an S-video Cable NOTE: The S-Video cable is not provided by Dell. 1 Power cable 2 S-video cable 2 1

10 Connecting Your Projector Connecting a DVD Player using a Composite Cable NOTE: The Composite video cable is not provided by Dell. 1 Power cable 2 Composite video cable 22 1

Connecting Your Projector 11 Connecting a DVD Player using a Component Cable NOTE: The D-sub to YPbPr cable is not provided by Dell. 1 Power cable 2 D-sub to YPbPr cable 1 2

12 Connecting Your Projector Connecting a DVD Player using an HDMI Cable NOTE: The HDMI cable is not provided by Dell. 1 Power cable 2 HDMI cable 2 1

Using Your Projector 13 3 Using Your Projector Turning Your Projector On NOTE: Turn on the projector before you turn on the source. The Power light blinks blue until the Power button is pressed. 1 Remove the lens cap. 2 Connect the power cable and appropriate signal cables. For information about con...

14 Using Your Projector NOTE: If you press the Power button while the projector is running, the " Press Power Button To Turn Off Projector " message appears on the screen. To clear the message, press a button on the control panel. The message disappears after 5 seconds. Adjusting the Project...

Using Your Projector 15 Adjusting the Projector Zoom and Focus CAUTION: To avoid damaging the projector, ensure that the zoom lens and elevator foot are fully retracted before moving the projector or placing the projector in its carrying case. 1 Rotate the zoom tab to zoom in and out. 2 Rotate the f...

16 Using Your Projector Adjusting Projection Image Size 327.7" (832.4cm) 245.8" (624.3cm) 191.2" (485.6cm) 136.6" (346.8cm) 81.9" (208.1cm) 27.3" (69.4cm) 359.4"(913.0cm) 269.6"(684.7cm) 209.7"(532.6cm) 149.8"(380.4cm) 89.9"(228.2cm) 30.0 "(76.1cm) Pro...

Using Your Projector 17 Using the Control Panel Screen (Diagonal) Max. 30.0" (76.1cm) 89.9" (228.2cm) 149.8" (380.4cm) 209.7" (532.6cm) 269.6" (684.7cm) 359.4" (913.0cm) Min. 27.3" (69.4cm) 81.9" (208.1cm) 136.6" (346.8cm) 191.2" (485.6cm) 245.8" (624.3cm)...

Using Your Projector 19 Using the Remote Control 7 Menu Allows you to activate the OSD. Use and the Menu button to navigate through the OSD. 8 / Source Allows you to adjust the OSD setting.You can also use the Left button to toggle through Analog RGB, Composite, Component (YPbPr, via VGA), S-video, ...

Using Your Projector 21 Using the On-Screen Display The projector has a multi-language On-Screen Display (OSD) that can be displayed with or without an input source present. In the Main menu, press or to navigate through the tabs. Press the Enter button on the control panel or the remote control to ...

22 Using Your Projector C OMPOSITE V IDEO — Press Enter to detect Composite Video signal. HDMI— Press Enter to detect HDMI signal. Auto-Adjust Auto Adjust automatically adjusts the projector's display settings. While auto adjustment is in progress, the following message appears on the screen: Auto A...

26 Using Your Projector LAMP Using the Lamp menu, you can adjust the display settings of your projectors. The Picture menu, provides the following options: L AMP H OUR — Displays the operating hours since the last lamp timer reset. P OWER S AVING — Select Yes to set the Power Saving delay period. Th...

Using Your Projector 27 LANGUAGE OTHERS V OLUME — Press to decrease the volume and to increase the volume. M UTE — Allows you to enable/disable sound. A UDIO S OURCE — Allows you to select the audio source to either HDMI or Analog (Audio In) . C USTOMIZED S CREEN — Press Enter the Customized Screen ...

Troubleshooting Your Projector 31 4 Troubleshooting Your Projector If you experience problems with your projector, see the following troubleshooting tips. If the problem persists, contact Dell (See Contacting Dell on page 40). Problem Possible Solution No image appears on the screen • Ensure that th...

34 Troubleshooting Your Projector Guiding Signals Projector Status Description Control Buttons Indicator Power Menu Others TEMP (Amber) LAMP (Amber) Standby mode Projector in Standby mode. Ready to power on. BLUE Flashing OFF OFF OFF OFF Warming up mode Projector takes some time to warm up and power...

Troubleshooting Your Projector 35 Changing the Lamp The following message appears on the screen when your projector lamp is approaching end of life and requires to be changed: Lamp is approaching the end of its useful life in full power operation. Replacement suggested. www.dell.com/lamps CAUTION: B...

Specifications 37 5 Specifications 5 Light Valve Single-chip 0.65" WXGA DMD Type A, DarkChip ™ 2 Brightness 2000 ANSI Lumens (Max.) Contrast Ratio 2000:1 Typical (Full On/Full Off) Uniformity 80% Typical (Japan Standard - JBMA) Number of Pixels 1280 x 800 (WXGA) Displayable Color 16.7M colors Co...

40 Contacting Dell Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and te...

44 Index Index A Adjusting Projection Image Size 16 Adjusting the Projected Image 14 Adjusting the Projector Height 14 Elevator button 14 Elevator foot 14 Tilt adjustment wheel 14 Adjusting the Projector Zoom and Focus 15 Focus ring 15 Zoom tab 15 C Changing the Lamp 35 Connecting a Computer Power c...