Dell Force10 S55T- Quick Guide
Dell Force10 S55T– Quick Guide, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Quick Start Guide
- Page 5 – About this Guide; Documentation
- Page 7 – Installing the Hardware; Installing the Chassis in a Rack or Cabinet; Attaching Mounting Brackets; Step
- Page 9 – Install Chassis into Rack or Cabinet
- Page 11 – Install the SFP and SFP+ Optics; The chassis are shipped as follows:; Power Up Sequence; Supply Power and Power Up the System; The equipment rack is properly mounted and grounded.
- Page 12 – All protective covers are in place.; AC Power
- Page 13 – Power Supplies; The chassis come from the factory with the following:
- Page 14 – Specifications; Chassis Physical Design; Parameter
- Page 16 – CAUTION: Remove the power cable from the modules prior to; For a NEBS compliant installation, the AC power connections
- Page 17 – Install a DC Power Supply
- Page 19 – Installing the Software; Navigating CLI Modes; end; command which; exit; command moves you up; Console Access
- Page 20 – Serial Console
- Page 22 – Default Configuration; switchport; Configure a Host Name
- Page 23 – Access the System Remotely; Configure the Management Port IP Address
- Page 24 – Configure a Username and Password; Configure the Enable Password; Dell Force10 recommends using the enable secret password.
- Page 25 – Create a Port-based VLAN; Use the; show vlan; command in the EXEC privilege mode to view the; Assign Interfaces to a VLAN; To view just the interfaces that are in Layer 2 mode, enter the; show; command in the EXEC privilege mode or EXEC mode.
- Page 26 – untagged; command to move untagged interfaces from the Default; Assign an IP address to a VLAN; Connecting the Chassis to the Network
Dell Force10
S55 and S60 Systems
Quick Start Guide
Regulatory Model: S55/S60
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dell Force10 S55 and S60 Systems Quick Start Guide Regulatory Model: S55/S60
About this Guide 3 About this Guide This document is intended as a Quick Start Guide to get new systems up and running and ready for configuration. For complete installation and configuration information, refer to the following documents: Documentation S55 S60 Hardware installation and power-up inst...
Installing the Hardware 5 1 Installing the Hardware This guide assumes all site preparation has been performed before installing the chassis. Installing the Chassis in a Rack or Cabinet To install the S55 or S60 systems, Dell Force10 recommends that you complete the installation procedures in the or...
