Dell 5310n - Workgroup Laser Printer B/W- User Manual

  BSD License and Warranty Statements   Copyright (c) 1991 The Regents of the University of California. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source c...

Finding Information     What are you looking for? Find it here l Drivers for my printer l My User's Guide Drivers and Utilities CD   Use the CD to uninstall/reinstall drivers or access your documentation. Readme files may be included on your CD to provide last-minute updates about technical changes ...

  GNU License GENERAL PUBLIC LICENSE   Version 2, June 1991   Copyright (C) 1989, 1991 Free Software Foundation, Inc.   59 Temple Place, Suite 330, Boston, MA 02111-1307 USA   Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Pream...

Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 11. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to as...

YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY...

Clearing Jams      Identifying Jams    Clearing Printer Jams   By carefully selecting print media and loading it properly, you should be able to avoid most paper jams. For more information on avoiding paper jams, see Avoiding Jams . If jams do occur, follow the steps outlined in this section.   To r...

23x Paper Jam Open Duplex Rear Door 1. Open the duplex rear door.   2. Remove the jammed media. Depending on the media location, pull the media either up or down.   3. Close the duplex rear door. Make sure it snaps into place.   4. Press the Select button . 23x and 24x Jams   Paper jams in these are...

2. Open the duplex tray, and remove the media by pulling up.   3. Open any optional trays beginning at the top, and remove any jammed media. Pull the print media either up or down. If it does not pull easily one way, try the other way.   4. Press the Select button . 250 Paper Jam Check MP Feeder 1. ...

2. Flex, fan, and restack the media.   3. Load the print media.   4. Slide the side guide toward the inside of the tray until it lightly rests against the edge of the media.   5. Press the Select button . 260 Paper Jam Check Env Feeder   The envelope feeder feeds envelopes from the bottom of the sta...

6. Lower the envelope weight.   7. Press the Select button . 27x Paper Jam Check Bin x   To clear a jam in the output expander: 1. If the paper is exiting into the bin, pull the media straight out, and press the Select button . Otherwise, continue with step 2 .   2. Push the output bin rear door lat...

Licensing Notice     The printer resident software contains:   l Software developed and copyrighted by Dell and/or third parties   l Dell modified software licensed under the provisions of the GNU General Public License version 2 and the GNU Lesser General Public License version 2.1   l Software lic...

Installing Drivers for Local Printing      W i n d o w s    Macintosh    Linux/UNIX   A local printer is a printer attached to one computer using a USB or parallel cable. If your printer is attached to a network instead of your computer, go to Installing Drivers for Network Printing .   A printer dr...

In all others , click Start ® Settings ® Printers . 3. Double-click Add Printer . 4. Click Next . 5. Select Local printer attached to this computer, and then click Next . 6. Select the port you want your printer to use, and then click Next . 7. Select Have Disk . 8. Browse to your CD drive and selec...

c.   Choose the appropriate language, and click Continue . d.   Click Continue after viewing the Readme file. e.   Click Continue after viewing the license agreement, and click Agree to accept the terms of the agreement. f.   On the Installation Type screen, click Install . All the necessary files a...

l SuSE Linux Linux System Requirements   Printer drivers has minimum Linux installation space requirements of 70MB in /usr/local. Installing on RedHat Linux or SuSE Linux 1. Read Before Installing . 2. Mount the CD. 3. Change your directory to the package file directory. If you mounted your CD-ROM t...

a.   To accept the defaults, press Enter . b.   To answer yes/no questions, type y , n , or ? , and then press Enter . c.   When a message appears telling you the installation was successful, type q to quit. Removing Print Drivers   A system administrator removes printer drivers using the utilities ...

Maintaining the Printer      Moving the Printer    Maintaining Printer Supplies    Replacing the Toner Cartridge    Replacing Maintenance Kit Items   Periodically, you need to complete certain tasks to maintain optimum print quality. These tasks are covered in this chapter.   If several people are u...

must be securely fastened to its pallet. Do not use a shipping or transport method that requires the printer to be shipped without a pallet. The printer must stay upright throughout the shipment. If you do not have all the original packaging, contact your local service representative to order the re...

7. Close the top front cover.   8. Close the multipurpose feeder.   Replacing Maintenance Kit Items Replacing the Charge Rolls   Order a new charge roll kit when toner fog or background shading appears on printed pages. 1. Turn the printer off, and unplug the printer power cord. 2. Pull on the notch...

17. Plug the printer power cord into a properly grounded electrical outlet. Replacing the Transfer Roller   Order a new transfer roller when light print, toner fog, or background shading appears on printed pages. 1. Turn the printer off, and unplug the printer power cord. 2. Pull on the notch on the...

12. Close the top front cover.   13. Close the multipurpose feeder.   14. Plug the printer power cord into a properly grounded electrical outlet. Replacing the Pick Rollers 1. Remove the standard tray.   2. Look underneath the printer for the pick roller arm and pull it down.   Downloaded from Manua...

Understanding Paper and Specialty Media Guidelines      Supported Print Media    Selecting Print Media    Storing Print Media    Avoiding Jams   Print media is paper, card stock, transparencies, labels, and envelopes. The printer provides high quality printing on a variety of print media. You must c...

Print Media Weights   Optional 500-sheet drawer A4 8.27 x 11.7 in. (210 x 297 mm) A5 5.83 x 8.27 in. (148 x 210 mm) JIS B5 7.17 x 10.1 in. (182 x 257 mm) Letter 8.5 x 11 in. (216 x 279 mm) Legal 8.5 x 14 in. (216 x 356 mm) Executive 7.25 x 10.5 in. (184 x 267 mm) Folio 1 8.5 x 13 in. (216 x 330 mm) ...

Selecting Print Media   Selecting the appropriate print media for the printer helps you avoid printing problems. The following sections contain guidelines for choosing the correct print media for the printer. Paper   For the best print quality, use 75 g/m2 (20 lb) xerographic, grain long paper. Try ...

The following papers are not recommended for use with the printer:   l Some chemically treated papers used to make copies without carbon paper, also known as carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper   l Preprinted papers with chemicals that may contaminate th...

The printer can automatically feed paper weights from 60 to 176 g/m2 (16 to 47 lb bond) grain long in the integrated and optional 500 -sheet trays and paper weights from 60 to 135 g/m2 (16 to 36 lb bond) grain long in the multipurpose feeder and optional 250 - sheet trays. Paper lighter than 60 g/m2...

using with the printer before buying large quantities. See Loading the Multipurpose Feeder and Loading the Envelope Feeder for instructions on loading envelopes.   When printing on envelopes:   l To achieve the best possible print quality, use only high-quality envelopes that are designed for use in...

l Do not use label sheets with a slick backing material.   l Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets also contaminate the printer and your cartridge with adhesive, and could void the printer and cartridge warranties.   l ...

Understanding the Operator Panel Menus      Paper Menu    Reports    Settings    Security    Network/Ports   A number of menus are available to make it easy for you to change printer settings. The diagram shows the menu index on the operator panel, the menus, and items available under each menu. The...

Reports Menu Settings Page   This menu selection prints a menu settings page.   Device Statistics   This menu selection displays the printer statistics.   Network Setup Page   This menu selection prints a network setup page.   NetWare Setup Page   This menu selection prints information relating to t...

Print Fonts   This menu selection prints a list of the fonts stored in the printer.   Settings Setup Menu   Use this menu selection to configure a variety of printer features.   Menu selection: Purpose: Values: Print Fonts Prints a sample of all the fonts available for the selected printer language....

Finishing Menu   Use this menu selection to define how the printer delivers the printed output.    When the timer expires, any partially formatted page still in the printer is printed, and other input ports are examined to see if data exists. 9 0 * is the default setting. Wait Timeout: Disabled 15.....

Quality Menu   Bind how the printing on the back of the sheet (even-numbered pages) is oriented in relation to the printing on the front (odd-numbered pages). NOTE: You must have an optional duplex unit installed. E d g e * orientation and top edge for landscape orientation). Short Edge Assumes bind...

Security   This menu selection is used to set security levels on individual print jobs requiring a PIN.   Network/Ports TCP/IP   This menu section is use to view and change the Transmission Control Protocol/Internet Protocol settings.   Standard Network and Network <x>   Use this menu selectio...

Understanding the Operator Panel Messages     The printer operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This chapter provides a list of all printer messages, explains what they mean, and tells you how to clear t...

Installing Drivers for Network Printing      Printing a Network Setup Page    Assigning a Printer IP Address    Verifying the IP Settings    W i n d o w s    Macintosh    Linux/UNIX    N e t W a r e Printing a Network Setup Page   If the printer is attached to a network, print a network setup page o...

8. Press the Down arrow button until appears next to Gateway , and then press the Select button . 9. Using the numeric pad, enter the IP gateway. When the address is entered, press the Select button . Submitting Selection appears briefly. 10. Press the Select button until the printer returns to Read...

For remote installation: a.   Select Install printer on one or more remote computers , and then click Next . b.   Enter your Administrator user name and password, and then click Add . c.   Select the clients or servers, and then click Next . 5. Select the network printer you would like to install. I...

1. Turn on your computer and insert the Drivers and Utilities CD. The Drivers and Utilities CD should automatically launch. This may take a few seconds. If the CD doesn't launch automatically, browse to the CD drive, and double-click setup.exe . 2. When the Drivers and Utilities CD screen appears, c...

  You can use Microsoft's Point and Print or Peer-t o-Peer methods to share a printer on the network with a USB or parallel cable connection. To use one of these methods, you must first share the printer and then install the shared printer on client computers.   NOTE: If you need to set up your prin...

  If you use the Peer-t o-Peer method, the printer driver is fully installed on each client computer. Network clients retain control of driver modifications. The client computer handles the print job processing. 1. In Windows XP, click Start ® Control Panel ® Printers and Other Hardware ® Printers a...

1. Open Finder, click Applications , and click Utilities . 2. Double-click Print Center or Printer Setup Utility . 3. C h o o s e Add Printer from the "Printers" menu. 4. C h o o s e AppleTalk from the pop-up menu. 5. Select the AppleTalk zone from the list. 6. Select the new printer from th...

  Depending on your operating system, you mark the printer drivers packages for removal after you start the program, or you type the names of the printer drivers package names you want to remove on the command line. See your operating system documentation for more information.     Run the uninstall ...

  Other Third-Party Licenses (Software) The Apache Software License, Version 1.1   Copyright (c) 2000 The Apache Software Foundation. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ...

"This product includes software developed by the JDOM Project ( http://www.jdom.org/ )."   Alternatively, the acknowledgment may be graphical using the logos available at http://www.jdom.org/images/logos .   THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, I...

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the reci...

<signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice   That's all there is to it!   wxWindows Library Licence, Version 3   Copyright (C) 1998 Julian Smart, Robert Roebling [, ...]   Everyone is permitted to copy and distribute verbatim copies of this licence document, but changing i...

Installing and Removing Options      Order of Installation    Installing a 250-Sheet or 500-Sheet Drawer    Installing a Duplex Unit    Installing an Output Expander    Installing an Envelope Feeder    Installing Printer Memory    Installing Font ROMs Order of Installation   Floor-mounted configurat...

  2. Place the support unit on top of any previously installed drawers or the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you position the support unit so the edges are aligned properly. Make sure the support unit is secu...

1. Place the duplex unit on top of any installed drawers or the table or printer cabinet where you plan to use the printer. The tab, round peg, and square holes on top of any drawer help you position the duplex unit so the edges are aligned properly. Make sure it is securely in place.   2. Attach th...

  5. Slide the lower tabs on the tray into the lower slots on the output expander.   6. Rotate the tray up until the upper tabs snap into the upper slots. 7. If you are not attaching any more print media handling options, attach the top cover to the output expander. Installing an Envelope Feeder   T...

  The envelope feeder tilts downward at a slight angle when it is installed properly. Installing Printer Memory Installing a Printer Memory Card 1. Open the side door.   2. Push open the latches on both ends of the printer memory card connector.   3. Unpack the memory card. Avoid touching the connec...

6. Make sure each latch fits over the notch on the end of the card.   7. Close the side door.   Removing a Printer Memory Card 1. Open the side door.   2. Push the latches away from the card on both ends of the printer memory card connector. The memory card moves out of the connector as the latches ...

3. Pull the memory card out of the connector. Avoid touching the connection points along the edge of the card.   4. Place the card into the original packaging. If you do not have the original packaging, wrap the card in paper, and store it in a box. 5. Close both latches.   6. Close the side door.  ...

  2. Unpack the Font ROM. 3. Holding the Font ROM by the locking clips, align the plastic pins on the card with the holes on the system board.   4. Push the Font ROM firmly into place, and release the locking clips. The entire length of the connector on the Font ROM must touch the system board and b...

Printing      Sending a Job to Print    Canceling a Print Job    Printing the Menu Settings Page    Printing a Network Setup Page    Printing a Font Sample List    Printing a Directory List    Printing Confidential and Held Jobs    Printing on Specialty Media    Loading Standard Trays and Optional T...

¡ Canceling a Job From the Desktop   l Canceling a Job From a Macintosh Computer ¡ Canceling a Print Job From a Computer Running Mac OS 9 ¡ Canceling a Job From a Computer Running Mac OS X Canceling a Job From the Printer Operator Panel   If the job is formatting or already printing, and Cancel a Jo...

3. Press the Down arrow button until appears next to Reports , and then press the Select button . 4. Press the Down arrow button until appears next to Print Directory , and then press the Select button . The printer returns to Ready . Printing Confidential and Held Jobs   The term held job refers to...

The job will print or be deleted according to the type of print job and action you selected. Printing on Specialty Media   Media is paper, card stock, transparencies, labels,and envelopes. The last four are sometimes referred to as specialty media . Follow these instructions to print on specialty me...

  6. Squeeze the side guide tab, and slide the guide toward the inside of the tray until it lightly rests against the edge of the media.   7. Insert the tray into the printer.   Setting the Paper Type and Paper Size   After setting the Paper Type and Paper Size to the correct values for the type and...

This saves this setting as the new user default, and the printer returns to Ready . Loading the Multipurpose Feeder   The multipurpose feeder can hold several sizes and types of print media, such as transparencies, postcards, note cards, and envelopes. It can be used for single-page or manual printi...

Closing the Multipurpose Feeder 1. Remove print media from the multipurpose feeder.   2. Push the extension tray in.   3. Close the multipurpose feeder   Loading the Envelope Feeder   The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder must be adjusted c...

6. Slide the width guide to the left until it lightly touches the stack. Make sure the envelopes do not buckle.   7. Lower the envelope weight to touch the stack.   8. Set the Paper Size and Paper Type for the envelope feeder (envelope Feeder Size and envelope Feeder Type ) to the correct value for ...

For example, if you have the same size and type of print media loaded in tray 2 and tray 4, the printer selects print media from tray 2 until it becomes empty, and then the printer automatically feeds print media from the next linked tray — tray 4.   By linking all trays (standard and optional), you...

Linking output bins   Linking output bins lets you create a single output source so the printer can automatically switch output to the next available bin. You can also set the output type for media such as card stock or envelope sizes that cannot be sent to an optional output bin. For more informati...

Regulatory Notices      FCC Notices (U.S. Only)    IC Notice (Canada Only)    CE Notice (European Union)    CE Mark Notice    Simplified Chinese Class A Warning Notice (China Only)    EN 55022 Compliance (Czech Republic Only)    VCCI Notice (Japan Only)    Polish Center for Testing and Certification...

FCC Notices (U.S. Only)   Most Dell devices are classified by the Federal Communications Commission (FCC) as Class B digital devices. To determine which classification applies to your device, examine all FCC registration labels located on the bottom, side, or back panel of your device, on card-mount...

  CE Notice (European Union)   Marking by the symbol indicates compliance of this Dell device to the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC of the European Union. Such marking is indicative that this Dell device meets the following technical standards:   l EN 55022 — "I...

Simplified Chinese Class A Warning Notice (China Only)   On Class A systems, the following warning will appear near the regulatory label:   Warning: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate...

  If the regulatory label includes the following marking, your device is a Class A product: Class B ITE     This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this equipment is used near a radio or televis...

  If you find a or mark on the regulatory label on the bottom, side, or back panel of your device, the following section is applicable:   NOM Information (Mexico Only)   The following information is provided on the device(s) described in this document in compliance with the requirements of the offic...

  Euroopan unionissa tämä merkintä kertoo, että tuote tulee hävittää kotitalousjätteen mukana.. Se tulee hävittää niin, että se voidaan noutaa ja siirtää kierrätykseen. Lisätietoja tämän tuotteen kierrättämisestä maassasi on osoitteessa www.euro.dell.com/recycling. Directive WEEE (Waste from Electri...

I EU betyr denne etiketten at dette produktet ikke skal kastes sammen med  husholdningsavfall. Det bør leveres til et godkjent avfallsanlegg, slik at det kan gjenopprettes og resirkuleres. Hvis du vil ha informasjon om hvordan du kan  resirkulere dette produktet på riktig måte i ditt land, kan du gå...

En la Unión Europea, esta etiqueta indica que este producto no se debe desechar con la basura doméstica, sino que se debe depositar en un lugar adecuado  p a r a  permitir su recuperación y reciclaje. Para obtener información sobre cómo reciclar este producto de forma responsable en su país, visite:...

Software Overview      Dell™ Toner Management System    Set IP Address Utility    Dell Printer Software Uninstall    Driver Profiler    Dell Printer Configuration Web Tool   Use the Drivers and Utilities  CD that came with your printer to install a combination of software applications, depending on ...

  The Set IP Address Utility lets you set up an IP address and other important IP parameters. To set the IP Address manually: 1. Launch the Dell Printer Configuration Web Tool by typing your network printer's IP address in your Web browser. 2. Click Printer Settings . 3. Under Printer Server Setting...

  If you fill out printer inventory reports requiring the asset tag number of all of the printers in your area, the Dell Printer Configuration Web Tool has a Printer Information feature that makes it easy. Just type the IP address of each printer on the network to display the asset tag number.     T...

Troubleshooting      Understanding Printer Messages    Checking an Unresponsive Printer    Solving Printing Problems    Solving Option Problems    Solving Paper Feed Problems    Solving Print Quality Problems Understanding Printer Messages   The printer displays three types of messages: status messa...

Installing the Optional Wireless Card      Minimum Requirements for Setup    Wireless Network Settings    Installing the Optional Wireless Card    Configuring the Optional Wireless Card (Windows)    Configuring the Optional Wireless Card (Macintosh) Minimum Requirements for Setup   l The Dell 5210 /...

Configuring the Optional Wireless Card (Windows) Configuration Overview   After the internal wireless print server has been installed in a printer, there are two ways the print server can be configured for use on a wireless network: Configuring the print server using the Wireless Setup Utility, or b...

1. Select the appropriate Network Name (SSID). Wireless Configurations Found on Your Computer l If existing wireless configurations are found on the computer, select the appropriate Network Name (SSID) from the list, click Next , and go to step 2 . l If the correct network name is not in the list, s...

Advanced Mode   The Advanced Mode home screen provides additional options for using the Wireless Setup Utility. Clicking Wizard Mode will revert the Wireless Setup Utility to Wizard Mode. Clicking Options provides the following management options:   l Select either Wizard Mode or Advanced Mode as th...

b.   Confirm the password. c.   Click Install CA Certificate . d.   Enter the path to the correct CA certificate, or click Browse to select the certificate. Click OK to install the certificate, or click Cancel to cancel the action. e.   Click OK to return to the Advanced Mode home screen, and contin...

  The easiest way to change settings in the wireless print server is through the embedded Web server. For this to work, the printer must be successfully installed on the network. 1. Enter the IP address of the printer in a browser window. The embedded Web page for the print server appears. To locate...

  If the computer IP address is not within the same range as the print server, the IP address will need to changed so that it is within the appropriate range. For information on locating and changing the computer IP address, see the computer or operating system documentation. 6. Open a Web browser, ...

The option to set the Network Name (SSID) and Network Mode (Ad-Hoc or Infrastructure) using the printer operator panel is available for certain printer models. See your printer documentation for information on navigating the printer menus to help locate the appropriate menu option. Menu names pertai...

    Regulatory Notices for Wireless Option Operational Information Wireless interoperability   The Dell 5210 / 5310 Wireless Option is designed to be interoperable with any wireless LAN product that is based on direct sequence spread spectrum (DSSS) radio technology and orthogonal frequency division...

  High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with this device, or can cause damage to this device, or both. Interference Statement   These devices comply with Part 15 of the FCC Rules. Opera...

Dell Inc déclare que l'option Sans fil Dell 5210 / 5310 décrite dans ce manuel d'utilisation répond aux principales exigences et aux autres dispositions respectives de la Directive européenne 1999/5/CE.   Hiermit erklärt Dell Inc, dass die Dell 5210/5310 -WLAN-Optionskarte den grundlegenden Anforder...