Dell 2000 - Manual
Dell 2000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dell PowerVault SAN Administrator’s Guide
- Page 4 – Dell OpenManage Data Administrator Installation
- Page 5 – File Library; at
support.dell.com
W indows NT and Windows 2000 SAN Configurations
3-1
C H A P T E R 3
Windows NT and Windows 2000
SAN Configurations
This chapter provides an example of a Windows NT and Windows 2000 SAN configu-
ration and provides high-level installation instructions for installing the Windows SAN
with either PowerVault 650F and 651F storage systems or the 660F storage system.
NOTE: For information about the PowerVault 530F SAN appliance, see Chapter 5,
“Dell PowerVault 530F SAN Appliance Configurations.”
Windows NT or Windows 2000 SAN
Figure 3-1 shows an example of a Windows NT or Windows 2000 SAN configuration
with 20 Windows NT or Windows 2000 servers. Installation procedures for a
Windows SAN vary depending on whether it includes the 650F and 651F or the 660F.
To install and configure the 650F or 651F in a Windows SAN, you should use the
following management software:
•
Dell OpenManage Data Managed Node
•
Dell OpenManage Data Administrator or Dell OpenManage Data Supervisor
•
Dell OpenManage Application Transparent Failover (ATF)
•
Dell OpenManage Storage Consolidation
•
QLogic Fibre Channel Configuration Utility
To install and configure the 660F in a SAN, you need to use the following software:
•
QLogic QLDirect
•
QLogic Fibre Channel Configuration Utility
•
Dell OpenManage Array Manager
You do not need Dell OpenManage Hardware Instrumentation Package (HIP) if
Array Manager is used to manage only servers with Fibre Channel HBAs. How-
ever, if Array Manager is used to manage servers with PERC RAID controllers,
you must install HIP on the management station before installing Array Manager.
•
Dell OpenManage Storage Consolidation
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3-2 Dell PowerVault SAN Administrator’s Guide Figure 3-1. Windows NT and Windows 2000 20-Server SAN Sample Configuration
3-4 Dell PowerVault SAN Administrator’s Guide f. Install Dell OpenManage Storage Consolidation. For instructions, see Chap-ter 11, “Installing, Configuring, and Removing Microsoft WindowsSAN Software Components.“ g. Install failover software on all servers. The software must be installed in thefollo...
support.dell.com W indows NT and Windows 2000 SAN Configurations 3-5 • Create virtual disks in the 660Fs. For instructions, see “Managing LUNs” inChapter 14 or see the Dell OpenManage Array Manager User’s Guide . 8. Reboot all servers after all LUNs have transitioned to owner status and you haveveri...
