Delfield ST4048 - Manual

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Ex terior

top shall be one -piece, 22- gauge stainless

steel with front edge turned down to form nosing
and rear edge turned up to form a 4” (10.2cm) high
backsplash. Ex terior back and bottom shall be one -
piece, 24- gauge galvanized metal. Ex terior ends shall
be 22- gauge stainless steel.

Base

interior shall be one -piece thermoformed ABS

plastic material, with integral shelf suppor ts. Cabinet
shall have (4) epox y- coated wire shelves installed.
Base shall be fully insulated with high- densit y
foamed-in-place polyurethane.

Doors

shall have a 22- gauge stainless steel ex terior,

with a thermoformed ABS plastic interior liner,
and shall be fully insulated with foamed-in-place
polyurethane. Door handles shall be black , recessed
ABS.

Elec trical

connec tions shall be 115 volt, 60 Her tz,

single phase. Unit shall have a 7’ (2.1m) long
elec trical cord and NEMA 5-15P plug. Cord and plug
shall be located on rear of cabinet, 16” (40.6cm)
above floor, 12” from the lef t.

Equipment shall be mounted on 6” (15.2cm) high
metal legs with black enamel finish.

THE FOLLOWING APPLIES TO MODEL ST4048
(REFRIGER ATOR) ONLY:

Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/5 h.p., with condenser coil
and hot gas condensate evaporator mounted on rear
of cabinet. Evaporator coil and temperature control
shall be mounted on the interior rear wall of the
cabinet. Refrigerant flow shall be controlled by a
capillar y tube. Cabinet shall maintain 36°F to 40°F
(2°F to 4°C ) interior cabinet temperature.

THE FOLLOWING APPLIES TO MODEL ST4148
(FREEZER) ONLY:

Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/3 h.p., with condenser coil
and hot gas condensate evaporator mounted on rear
of cabinet. Evaporator coil and temperature control
shall be mounted on the interior rear wall of the
cabinet. Refrigerant flow shall be controlled by a
capillar y tube. Cabinet shall maintain -5°F to 0°F (-
21°to -18°C ) interior cabinet temperature.

Specifications

Standard Features

Options &
Accessories

• Features Delfield’s exclusive ABS interior.

ABS is extremely durable - it won’t dent,
chip or corrode and is backed by a
limited lifetime warranty

• Stainless steel front, sides and top
• Environmentally

friendly

R404A

refrigerant

• Foamed in place polyurethane cuts

energy costs

• Black recessed quick grip handle
• Rugged 6” high heavy duty metal legs
• Door hinging available on either right

or left, right side is standard

• 60-cycle single phase electrical system
• 7’ cord and plug supplied
• One year parts and 90 day labor

standard warranty.

• 4” backsplash has two knockouts with

covers for electrical outlets (outlets
provided by others)

• Four epoxy coated wire shelves standard

per unit

ST4048
Two sec tion worktop
refrigerator

ST4148
Two sec tion worktop
freezer

Models

4000 Series

Self-Contained Worktop Refrigerator/Freezer

40

00

S

eri

es

S

elf

-C

on

ta

in

ed

W

or

k T

op

R

efr

ig

era

to

r/F

re

ez

er

o Stainless steel back
o Plastic laminate on front
o Additional wire shelves
o Stainless steel single-tier overshelf
o 5” (12.7cm) diameter casters
o Door lock
o 220 volt, 50 Hertz electrical system

ST4048