Delfield SST2-S - Manual

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Delfield

™

®

Operation Description:

Unit is designed to safely and quickly thaw

frozen food under controlled temperature conditions. Both full and

partial loads can be thawed. Product will be taken from 0˚F to 38˚F

in approximately 18 hours. Once product is thawed, it is held at

33˚F to 41˚F. Thawing is automatic once thaw mode is selected with

switch located behind flip up shroud.

Exterior:

Cabinet exterior sides, front and shroud shall be corrosion

resistant stainless steel. Upper shroud shall be hinged, with stay-

open feature to provide easy access to refrigeration system.

Interior:

Cabinet interior shall be corrosion resistant stainless

steel. Bottom and top surfaces are die stamped to provide radius

corners and recessed floor. Three chrome plated wire shelves are

provided per section. Shelves rest on clips which are adjustable

in 1” increments on stainless steel pilasters affixed to the cabinet

interior. Pilasters are removable without tools for cleaning. Interior

incandescent light, mounted to the interior ceiling is controlled

automatically through a switch mounted in the hinge assembly to

protect against breakage. Door openings are protected with heavy

gauge stainless steel breaker strips. An air duct is mounted to the

ceiling assuring low velocity, even air movement throughout the

cabinet interior.

Doors:

Exterior shall be corrosion resistant stainless steel. Interior

liner shall be resilient high impact ABS material, formed to protrude

beyond the door gasket to protect the gasket from tearing. Each

door has two edge mount, self closing, cam lift style hinges. Doors

can be removed from cabinet without the use of tools. Metal door

handle is recessed into the door for easy grip without impacting aisle

space. Keyed door lock is mounted in the door next to the handle.

Lock engages into a heavy duty strike mounted to the cabinet face.

Door gaskets are magnetic and mount to the door snapping in place

and are removable without tools.

Refrigeration system:

All components are mounted to the exterior

cabinet ceiling, outside the food zone and are assembled as one

piece and can be removed as one piece. Environmentally friendly

R404A refrigerant is used. System has the capability of maintaining

between 27˚F and 44˚F in heavy use food service operations.

Refrigerant is metered using a highly responsive thermostatic

expansion valve. System is controlled using Delfield’s ACT-Advanced

Control Technology electronic temperature control, which provides

improved pull down times, reducing compressor cycling and longer

compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free

of ice and operating at optimum efficiency. Evaporator condensate

is eliminated using an energy efficient hot gas system.

Thawing aided by mullion mounted heater and fan system.

Electrical:

Standard electrical connections shall be 115V, 60Hz,

single phase. A 10’ cord and plug is supplied attached to a junction

box mounted on the exterior top of the cabinet.

Specifications

Standard Features

Options &
Accessories

Stainless steel interior and exterior
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent
door vapor lock
Exterior digital thermometer
Easy to use electronic control
Easy access “flip up” panel
Three chrome plated wire shelves per
section
Tough ABS interior door liners
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High

density

foamed

in

place

environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty

•
•
•
•

•
•
•
•

•
•
•
•
•

•
•
•

SST2-S

Stainless ex terior and interior full door

SST2-SH

Stainless ex terior and interior half door

Models

Specification Line®

Self Contained Solid Door Two-Section Ready Thaw
Cabinet Reach In

Sp

ec

ifi

ca

tio

n L

in

e®

: S

olid

D

oo

r T

w

o S

ec

tio

n R

ea

dy

Th

aw

C

ab

in

et

Re

ac

h I

n

Security package
6” polyurethane casters
Door field rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base

•
•
•
•
•
•
•
•
•
•
•
•
•
•

SST2-S