Delfield SSRFF1-S - Manual

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Delfield

™

®

Operation:

Unit has four drawers per sec tion, each equipped

with special per forated pans to hold fish on ice. Drainage

system channels ice melt to cabinet floor where a bell type

drain with 3/4” pipe connec tion allows it to exit cabinet.

Connec tion to floor drain required by operator. Refrigeration

system operates as a normal reach-in would and ser ves to

retard ice melt.

Ex terior:

Cabinet ex terior sides, front and shroud shall be

corrosion resistant stainless steel. Upper shroud shall be

hinged, with stay- open feature to provide easy access to

refrigeration system.

Interior:

Cabinet interior shall be corrosion resistant stainless

steel. Bottom and top sur faces are die stamped to provide

radius corners and recessed floor.

Drawers:

Ex terior shall be corrosion resistant stainless steel.

Interior liner shall be corrosion resistant stainless steel.

Drawer slides and frame are corrosion resistant stainless

steel. Self lubricating Delrin rollers eliminate metal to metal

contac t. Roller track snaps out for easy cleaning. Per forated

pan with drainage is supplied and is removable for cleaning.

Refrigeration system:

All components are mounted to

the ex terior cabinet ceiling, outside the food zone and are

assembled as one piece and can be removed as one piece.

Environmentally friendly R404A refrigerant is used. System

has the capability of maintaining between 27˚F and 44˚F in

heav y use food ser vice operations. Refrigerant is metered

using a highly responsive thermostatic expansion valve.

System is controlled using Delfield’s AC T-Advanced Control

Technology elec tronic temperature control, which provides

improved pull down times, reducing compressor c ycling and

longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator

coil is free of ice and operating at optimum efficienc y.

Evaporator condensate is eliminated using an energy efficient

hot gas system.

Elec trical:

Standard elec trical connec tions shall be 115V,

60H z, single phase. A 10’ cord and plug is supplied attached

to a junc tion box mounted on the ex terior top of the cabinet.

Specifications

Standard Features

Options &
Accessories

Stainless steel interior and exterior
Exterior digital thermometer with
high/low temperature alarm
Easy to use electronic control
Easy access “flip up” shroud
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place envi-
ronmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone
Depletion Potential), Non GWP
(Global Warming Potential) polyure-
thane keeps energy costs low
Energy savings door heater switch
Four fish drawers with pans per
section
Two year parts & labor warranty
Five year compressor warranty

•
•

•
•
•
•
•
•

•
•

•
•

One sec tion Two sec tion

SSRFF1-S

SSRFF2-S

Stainless ex terior and interior

Models

Specification Line®

Self-Contained Fish Drawer Reach-In

Sp

ec

ifi

ca

tio

n L

in

e®

Fis

h D

ra

w

er

Re

ac

h-I

n

Stainless steel back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
High humidity evaporator coil
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical

•
•
•
•
•
•
•
•
•
•

SSRFF2-S

6.12”

15.5cm

81.12”

206.0cm

29.00”

73.7cm

34.00”

86.4cm

34.00”

86.4cm

25.00”

63.5cm

52.00”

132.1cm

56.00”

142.2cm