Delfield N14 - Manual

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Shelleymatic

®

by Delfield

Specifications

Standard Features

Options &
Accessories

Cabinet top and corners to be 16-gauge
stainless steel
1” IPS drain
Units insulated with foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane
Units to have sliding stainless steel lids with
recessed handle
Self-leveling mechanisms shall be
adjustable by adding and removing
stainless steel extension springs located
inside the elevator housing
Dispenser platform carrier shall be 18-
gauge stainless steel and removable for
cleaning
6” adjustable stainless steel legs
Refrigeration system shall be HFC-134A
refrigerant
Expansion valve and pressure control
9’ cord and plug
One year parts and 90 day labor standard
warranty

•

•
•

•

•

•

•
•

•
•
•

N6-1313-34

6 crate capacity, 34” height

N6-1313-36

6 crate capacity, 36” height

N10-1313-34

10 crate capacity, 34” height

•
•
•

N10-1313-36

10 crate capacity, 36” height

N14-1313-34

14 crate capacity, 34” height

N14-1313-36

14 crate capacity, 36” height

•
•
•

Models

N6/N10/N14

Free-Standing Self-Contained Milk Or Beverage Dispensers

N

6/

N

10

/N

14

Fr

ee

-S

ta

nd

in

g S

elf

-C

on

ta

in

ed

M

ilk

O

r B

ev

era

ge

D

isp

en

se

rs

4.00” (10.2cm) diameter swivel
casters (two locking) with corner
bumpers (adds 1.75” [4.4cm]
to overall length and depth and
reduces overall height by 1.00”
[2.5cm])
Wrap-around bumpers (adds 1.75”
[4.4cm] to overall length and
depth)
Lid locking device
Special voltages
Dial or digital style thermometer

•

•

•
•
•

N10-1313-36

Ex terior

sides shall be 20- gauge stainless steel. Top and corner

suppor ts shall be 16- gauge stainless steel, welded, ground and
polished into one integral unit.

Interior

liner shall be water-tight and construc ted of 22- gauge

stainless steel with a 1.00” (2.54cm) I.P.S. drain. Unit shall be
insulated with high- density, foamed-in-place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential) polyurethane
insulation with a non- conduc tive top breaker strip. Refrigerated
compar tment is equipped with drain plumbed to a drain valve
located at the bottom of the counter. Each opening shall have
a stainless steel sliding lid recessed handles. Three stainless
steel louvers shall be installed in the end and sides of the
cabinet to allow proper air flow to the condensing unit.

Each self-leveling mechanism shall be field adjustable by
adding or removing stainless steel ex tension springs in the
elevator housing inside the unit. The elevators shall be
connec ted by removable platform carriers construc ted of 18-

gauge stainless steel.

R e f r i g e rat i o n s ys t e m

s h a l l u s e H F C - 1 3 4 a re f r i g e r a n t .

Refrigerant flow shall be controlled by an expansion valve.
Cabinet shall maintain 36°F to 40°F (2°C to 4°C ) temperature
with lids closed for storage. Refrigeration system shall be
controlled by a pressure control, located near the condensing
unit.

Elec trical

connec tions shall be 115 volt, 60 c ycle, single phase.

Unit shall have a 9’ (2.7m) long elec trical cord and NEMA 5-15P
plug. Ex terior has an ON/OFF switch.

Legs:

Unit shall be mounted on 6.00” (15.2cm) high adjustable

stainless steel legs.

NOTE: This equipment is intended for storage and /or display
of pre -pack aged or bottled produc ts only.