Delfield F2FH 2 - Manual
Delfield F2FH 2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Ex terior
: Cabinet ex terior front, including door, is
construc ted of heav y gauge stainless steel. Ex terior
sides are gray coated heav y gauge steel. Back is
aluminum.
Interior
: Cabinet interior, including door liner is
construc ted of white coated, corrosion resistant
aluminum. I nterior floor is heav y gauge stainless
steel. R adius corners are provided in the front, rear
and at the floor. Three white epox y coated shelves are
supplied per full door sec tion. Shelves rest on clips
which are adjustable on 1” increments on pilasters
affixed to the cabinet interior. Pilasters are removable
without tools for cleaning. I nterior light mounted
to the side wall is controlled automatically through
a switch mounted at the top of the door opening.
Door openings have plastic breaker strips to retard
condensate formation.
Doors
: Ex terior is heav y gauge stainless steel, interior
liner is white coated aluminum and is formed to
protrude past the gasket to provide protec tion. Door
hinges are concealed within the door. Full ver tical
Specifications
Standard Features
• Ceiling mounted interior
evaporator coil
• Bottom mounted condensing unit
• Hot gas condensate removal
• 6’ attached cord and plug
• Exterior digital thermometer
• Stay open door
• No tools magnetic door gasket
• Epoxy coated shelves - 3 per
section
• One piece formed interior door
liner
• Full integral, vertical door handle
• Casters mounted from factory
• One year parts and labor warranty
• Additional 4 year compressor part
warranty
Options & Accessories
• 6” adjustable legs
• Additional epoxy coated shelves
Model
F1FR 1 section, full door, hinged right
F1FL 1 section, full door, hinged left
F1HR 1 section, half door, hinged right
F1HL 1 section, half door, hinged left
F2FH 2 section, full doors
F2HH 2 section, half doors
F3FH 3 section, full doors
ColdPro®
Self-Contained Solid Door Reach-In Freezer
C
old
Pro
® R
ea
ch
-In
Fr
ee
ze
rs
Project __________________________________
Item _____________________________________
Quantity _________________________________
CSI Section 11400
Approved ________________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, MI 48858
Phone: 800-733-8948
Fax: 800-669-0619
www.delfield.com
length door handle is integrated into the door ex terior.
Keyed door lock is mounted in the top of the door and
engages into a strike mounted at the top of the door
opening. Door gaskets are magnetic and mount to the
door, snapping into place and are removable without
tools.
Refrigeration system
: Evaporator coil is mounted to the
interior ceiling. Condensing unit is located at the bottom
of the cabinet, below the storage area. Environmentally
friendly R404A refrigerant is used. System has the
capabilit y of maintaining bet ween -5˚F and 0˚F in normal
foodser vice operational use. Refrigerant is metered
using a capillar y tube. Operation is controlled through
an adjustable elec tromechanical thermostat located
on the evaporator coil on the interior of the cabinet.
Air flow discharges from the rear of the evaporator
coil down the back wall. Return air is drawn into the
evaporator coil from the front with the assist for fans.
Condensate evaporation is automatic using hot gas from
normal refrigeration system operation. Evaporator coil
defrost is automatic using a mechanical time clock and
elec tric heaters.
O ther
: Unit is supplied with a 6’ cord and plug attached.
4” casters with an overall height of 5” are mounted on the
unit from the fac tor y.
F2HH
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.