Delfield F18RC91 - Manual

Project __________________________________

Item ____________________________________

Quantity ________________________________

CSI Section 11400

Approved _______________________________

Date ____________________________________

980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619

www.delfield.com

Ex terior top

is one -piece, 16- gauge stainless steel, with

integral 2.12” (5.4cm) high square nosing on front. Top has
a mechanically cooled refrigerated raised rail at rear with
openings to accommodate 1/6 size pans. Pans and adapter
bars are provided by others. Pans are recessed 2” (5.1cm). R ail
interior is 22- gauge stainless steel. R aised rail openings have
18- gauge stainless steel removable lids. Unit is equipped with
separate expansion valve and on/off switch for refrigerated
cold pan. Temperature in top opening to maintain 33°F (1°C ) to
41°F (5°C ) with pans recessed 2” (5.1cm) at 86° ambient room
temperature, meeting NSF7 requirements.

Ex terior Back and Bottom

are 24- gauge galvanized steel.

Ex terior ends are finished with 18- gauge galvanized steel.

Base Interior

has 22- gauge stainless steel back and bottom.

Base interior ends and door frames are thermoformed ABS
plastic. Base is insulated with 1.5” (3.8cm) high densit y
foamed in place environmentally fr iendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane. End of base has a
machine compar tment, standard on right, with condensing

unit installed.

Door(s)

have a 22- gauge stainless steel ex terior front, with

thermoformed ABS plastic interior liner, black recessed handle
and snap in magnetic gasket which is easily replaceable. Each
interior door sec tion has (1) removable epox y coated wire
shelf.

Refrigeration System

uses HFC-404A refrigerant. Cabinet has

a blower coil assembly with expansion valve located behind
door mullion. Base is equipped with independently controlled
thermostat, solenoid valve and condensate evaporator. On/off
switch for unit is located on panel above louver. Refrigeration
system in the base will maintain 36°F (2°C ) to 40°F (4°C ).

Legs:

Unit is mounted on 6.13” (15.6cm) high adjustable

stainless steel legs.

Elec trical

connec tions are 115 volt, 60 Her tz, single phase.

Unit is wired with 8’ (2.4m) cord and plug.

Specifications

Standard Features

Options &
Accessories

16 gauge stainless steel top
High density environmentally
friendly, Kyoto Protocol Compliant,
Non ODP (Ozone Depletion
Potential), Non GWP (Global
Warming Potential) polyurethane
foam insulation throughout unit
Snap-in dart style vinyl magnetic
gasket
Recessed black plastic handle held
in with a positive lock system
14 gauge leg rails that run the
entire length of the unit
6.12” adjustable full stainless steel
legs and bullet feet
8’ cord and plug
36” standard work height
Environmentally friendly HFC-404A
refrigerant
One year parts and 90 day labor
standard warranty

•
•

•

•

•

•

•
•
•

•

F18RC52

52” reduced height raised rail self- contained prep table

F18RC60

60” reduced height raised rail self- contained prep table

F18RC68

68” reduced height raised rail self- contained prep table

F18RC82

82” reduced height raised rail self- contained prep table

F18RC91

91” reduced height raised rail self- contained prep table

F18RC99

99” reduced height raised rail self- contained prep table

•
•
•
•
•
•

Models

F18RC

Reduced Height Raised Rail Self-Contained Prep Table

F1

8R

C:

Re

du

ce

d H

eig

ht

Ra

ise

d R

ail

Se

lf-C

on

ta

in

ed

P

re

p T

ab

le

Stainless steel end
Stainless steel back
Laminate facing (full front)
Laminate end
Laminate back
Cutting board (Sanalite or
composite)
Tray rack
Casters
Drawers, (2 or 3 high) 19”, 27” or
32” drawers in lieu of one door
Locks
Cold pan drain
220V/50 cycle

•
•
•
•
•
•

•
•
•

•
•
•

F18RC60

(Shown will optional stainless steel finished end.)