Delfield 4464N - Manual

4464N FRONT

-BREA

THING FLA

T TOP REFRIGERA

TED BASE

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

4464N FLAT TOP

Front-Breathing Flat Top Refrigerated Base

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date ____________________

MODELS:

❑

4464N

Two section refrigerator

❑

D4464N

Two section refrigerator

with doors

with drawers

Model 4464N

SPECIFICATIONS

Exterior top

is one-piece, 22-gauge stainless steel

with integral square nosing on the front.

Exterior back and bottom

are two-piece 24-gauge

galvanized steel.

Exterior ends

are stainless steel.

Interior sides

are thermoformed ABS plastic with

shelves supported on plugs. Interior back is one-
piece 22-gauge stainless steel. Interior bottoms are
thermofoamed ABS plastic. Base is fully insulated with
high-density foamed in place polyurethane.

Refrigeration system

uses HFC-404A refrigerant.

Compressor is 1/5 H.P., with condenser coil and hot

gas condensate evaporator mounted on rear of the
cabinet. Evaporator coils are located on the interior
rear wall of the cabinet. Refrigerant flow is controlled
by a capillary tube. Cabinet maintains an interior
cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control.

ACT electronic, solid state control,

mounted on the exterior rear of the cabinet, allows
unit to maintain precise temperatures in heavy duty
conditions.

Electrical connection

is 115 volt, 60 Hertz, single

phase. Unit has a 7’ (2.1m) long electrical cord and
NEMA 5-15P plug.

Casters

Equipment is mounted on 2” (5.08cm) (2.5”

ride height), diameter plate casters with front two
locking.

Door

has a 24-gauge stainless steel exterior, with

thermoformed ABS plastic interior liner.

Drawers

have 24-gauge stainless steel exterior with

thermoformed ABS plastic interior liner. Drawer frames
are 12-gauge stainless steel. Drawer slides are 11-
gauge stainless steel with Delrin bearings. Top drawer
holds one full size 12” x 20”, 4”-6" (30.5cm x 50.8cm
x 10.2cm) deep pan, and three 1/6 size pans. Bottom
drawer holds one full size 12 x 20" and three 1/6 size
4" deep pans. Pans are supplied by others.

STANDARD FEATURES

• All 4400 and 4500 Series units are 100% front

breathing, which allows the unit to be pushed against
a wall or built into a cabinet or an existing line up

• Durable, rugged stainless steel sides, top and front
• Features Delfield’s exclusive ABS interior (on sides).

ABS is extremely durable - it won’t dent, chip or
corrode and is backed by a limited lifetime warranty

• Heavy duty self-closing hinges
• “D” prefix models feature Delfield’s exclusive new

drawer system. Drawers are backed by a 10-year
warranty on the track assembly

• Environmentally friendly R404A refrigerant
• High density foamed in place polyurethane keeps

energy costs low

• Black recessed quick grip handle
• Standard on 2” casters for easy cleaning and

installation

• 60-cycle single phase electrical system
• 7’ cord and plug supplied
• Cord spring relief - prevents cord rollover
• One epoxy coated wire shelf standard, installed per

door section

• ACT solid state electronic control
• One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

❑

Flat lift off cover

❑

18” wide single tier overshelf

❑

Stainless steel finish on back

❑

Plastic laminate on front

❑

Additional wire shelves

❑

Door lock

❑

Exterior thermometer

❑

Interior lights

❑

Glass door(s)

❑

*220V/50 Hertz electrical system

* Inclusion of this option will alter electrical

specifications of the unit.