Defy 900 C - Manual

Defy 900 C

Defy 900 C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Electrical connection.
  • Page 3 – Preparing for installation.; Tools required for installation:; mm and 5mm dia. masonry drill bits; Venting air to the outside.; Connecting a 150 mm diameter pipe:; Attach a reducing connec-; filtered air; ceiling; Exhaust air through a dedicted pipe
  • Page 4 – For mounting the extractor hood,; drill
  • Page 5 – Engage the filter and release the catch.; Optional Carbon pad filter.
  • Page 6 – Replacing the light bulbs.; Glass cover
  • Page 7 – Maintenance and cleaning.; Cleaning procedure; Owner’s responsibility.
  • Page 8 – Service; Before calling a service technician to assist with a problem......; or have it repaired by qualified technicians.
Loading the manual

Page 1

You can rely on Defy

www.defy.co.za

OWNER’S

MANUAL.


DCH 253

900 C PREMIUM

STAINLESS STEEL

EXTRACTOR HOOD

WITH CURVED GLASS.

PLEASE READ THESE INSTRUCTIONS

CAREFULLY

BEFORE INSTALLING AND OPERATING.

The manufacturer strives for

continuous improvements.

For this reason, the text

and illustrations in this book

are subject to change

without notice.

Part Number 066471.

INDEX
2 Description.
2 Before use.
2 Safety advice.
2 Electrical connection.
3 Preparing for installation.
3 Re-circulating filtered air.
3 Venting air to the outside.
4 Installation.
5 Grease filter.
5 Optional Carbon pad filter.
6 Operation.
6 Replacing the light bulbs.
7 Maintenance and cleaning.
7 Owner’s responsibility.
8 Service.
8 Warranty.

900 C PREMIUM

EXTRACTOR

HOOD

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Electrical connection.

Page 2 • Never operate the extractor hood without a grease filter. • Never leave cooking fat or oil unat-tended. Overheated fat or oil can easily catch fire. • Do not flambé food directly under the ex-tractor hood. The flames pose the risk of the grease filter catching fire. (see page 7 under mainte...

Page 3 - Preparing for installation.; Tools required for installation:; mm and 5mm dia. masonry drill bits; Venting air to the outside.; Connecting a 150 mm diameter pipe:; Attach a reducing connec-; filtered air; ceiling; Exhaust air through a dedicted pipe

Page 3 Preparing for installation. The extractor hood has the ability to ei-ther recirculate the filtered air back into the kitchen, or to vent the filtered air through an outside wall. Decide on which option best suits you be-fore commencing with the installation. • The extractor hood is intended t...

Page 4 - For mounting the extractor hood,; drill

Page 4 10mm Installation. • Carefully remove the extractor hood and the components from the packaging. • Remove the grease filter ( see page 5). • Draw a fine vertical line on the wall from the rear-centre of the hob to the ceiling. • Draw another line, horizontal this time, where the bottom edge of...

Other Defy Models

All Defy Other