DCS CMOTTK30 - Manual
DCS CMOTTK30 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MODEL CMOTTK30 CONVECTION MICROWAVE TRIM KIT
INSTALLATION INSTRUCTIONS
Before installing trim kit, install the convection duct as follows:
1.
Insert the rear section of the duct into the forward section of the duct and install 4 screws supplied
(Fig. 01).
2.
Install foam tape on 2 flanges of the rear section of the duct (Fig. 02).
3.
Remove and retain the 2 top screws, left and right, located at the rear vertical edges of the Microwave
(Fig. 03).
4.
Place the duct on top of the Microwave and reinsert the 2 screws removed in Step 3 (Fig. 04).
Before you begin, read these instructions completely and carefully.
Getting Started
■
Remove packaging
Contents
Tools Required
Part Description
Qty
Trim Assembly
1
Base
1
Rear Duct
1
Forward Duct
1
Foam Tape
2 ft
Mounting Bracket (L/R)
2
Sheet Metal Screws
14
1/8” Drill
#2 Phillip Screwdriver
Fig. 01
Fig. 02
Fig. 03
Fig. 04
4 Screws
Foam Tape
Foam
Tape
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
