Page 2 - CONTENTS; READ BEFORE OPERATION
1 CONTENTS READ BEFORE OPERATION Safety precautions ......................................... 2Names of parts ............................................... 4Preparation Before Operation ........................ 7 OPERATION AUTO · DRY · COOL · HEAT · FAN Operation .....................................
Page 3 - Safety precautions; WARNING
2 READ BEFORE OPERATION Safety precautions • Keep this manual where the operator can easily find them.• Read this manual attentively before starting up the unit.• For safety reason the operator must read the following cautions carefully.• This manual classifies precautions into WARNINGS and CAUTIONS...
Page 4 - Consider nuisance to your neighbours from noises.
3 • Do not block air inlets nor outlets. Impaired air flow may result in insufficient performance or trouble.• Do not stand or sit on the outdoor unit. Do not place any object on the unit to avoid injury, do not remove the fan guard. • Do not place anything under the indoor or outdoor unit that must...
Page 5 - Names of parts; Indoor Unit; CAUTION
4 Names of parts ■ Indoor Unit ■ Opening the Front Panel How to open the front panel: (page 26.) CAUTION Before opening the front panel, be sure to stop the operation and turn the breaker OFF.Do not touch the metal parts on the inside of the indoor unit, as it may result in injury. 1 2 6 5 2 4 7 8 3...
Page 6 - Outdoor Unit
5 ■ Outdoor Unit ■ Indoor Unit 1. Titanium Apatite Photocatalytic Air-Purifying Filter: • These filters are attached to the inside of the air filters. 2. Air outlet3. Display4. Front panel5. Vertical blades (louvers): (page 12.) • The louvers are inside of the air outlet. 6. Air inlet7. Air filter8....
Page 7 - Remote Controller
6 ■ Remote Controller 1. Signal transmitter: • It sends signals to the indoor unit. 2. Display: • It displays the current settings. (In this illustration, each section is shown with all its displays ON for the purpose of explanation.) 3. FAN setting button: • It selects the airflow rate setting. 4. ...
Page 8 - Preparation Before Operation; To set the batteries; Choose a place from where the signals; ATTENTION
7 Preparation Before Operation ■ To set the batteries 1. Slide the front cover to take it off. 2. Set two dry batteries AAA.LR03 (alkaline). 3. Set the front cover as before. ■ To operate the remote controller • To use the remote controller, aim the transmitter at the indoor unit. If there is anythi...
Page 9 - To set the clock; Press “SELECT button” to set; NOTE
8 Preparation Before Operation ■ To set the clock 1. Press “CLOCK button”. is displayed. and blinks. 2. Press “SELECT button” to set the current day of the week. 3. Press “CLOCK button”. blinks. 4. Press “SELECT button” to set the clock to the present time. Holding down “ ” or “ ” button rapidly inc...
Page 11 - AUTO · DRY · COOL · HEAT · FAN Operation; To start operation; Press “MODE selector button”; To stop operation; Press “TEMPERATURE adjustment button”.
10 OPERATION AUTO · DRY · COOL · HEAT · FAN Operation The air conditioner operates with the operation mode of your choice. From the next time on, the air conditioner will operate with the same operation mode. ■ To start operation 1. Press “MODE selector button” and select a operation mode. • Each pr...
Page 12 - To change the airflow rate setting
11 ■ To change the airflow rate setting 5. Press “FAN setting button”. • Indoor unit quiet operation When the airflow is set to “ ”, the noise from the indoor unit will become quieter. Use this when making the noise quieter. NOTE DRY mode AUTO or COOL or HEAT or FAN mode The airflow rate setting is ...
Page 13 - Adjusting the Airflow Direction; Press “SWING button; Notes on flap and louvers angle
12 Adjusting the Airflow Direction You can adjust the airflow direction to increase your comfort. ■ To adjust the horizontal blade (flap) 1. Press “SWING button ”. • “ ” is displayed on the LCD and the flaps will begin to swing. 2. When the flap has reached the desired position, press “SWING button ...
Page 14 - Airflow selection; When setting the airflow selection switch to
13 ■ Airflow selection • Make airflow selection according to what suits you. When setting the airflow selection switch to . • Air conditioner automatically decides the appropriate blowing pattern depending on the operating mode/situation. • During Dry mode, so that cold air does not come into direct...
Page 15 - POWERFUL Operation; Press “POWERFUL button”
14 POWERFUL Operation POWERFUL operation quickly maximizes the cooling (heating) effect in any operation mode. You can get the maximum capacity. ■ To start POWERFUL operation 1. Press “POWERFUL button”. • POWERFUL operation ends in 20minutes. Then the system automatically operates again with the pre...
Page 16 - OUTDOOR UNIT QUIET Operation
15 OUTDOOR UNIT QUIET Operation OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the outdoor unit. This function is convenient during night. ■ To start OUTDOOR UNIT QUIET operation 1. Press “QUIET button”. • “ ” is displayed on the LC...
Page 17 - ECONO Operation
16 ECONO Operation ECONO operation is a function which enables efficient operation by limiting the maximum power consumption value.This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip when the product runs alongside other appliances. ■ To star...
Page 18 - TIMER Operation; Press “SELECT button” until; Press “OFF TIMER button”; To cancel the OFF TIMER Operation
17 TIMER Operation Timer functions are useful for automatically switching the air conditioner on or off at night or in the morning. You can also use OFF TIMER and ON TIMER in combination. ■ To use OFF TIMER operation • Check that the clock is correct. If not, set the clock to the present time. (page...
Page 19 - Press “ON TIMER button”; To combine ON TIMER and OFF TIMER
18 TIMER Operation ■ To use ON TIMER operation • Check that the clock is correct. If not, set the clock to the present time. (page 8.) 1. Press “ON TIMER button”. is displayed. blinks. 2. Press “SELECT button” until the time setting reaches the point you like. • Every pressing of either button incre...
Page 20 - WEEKLY TIMER Operation; Using in these cases of WEEKLY TIMER; No timer settings; to
19 WEEKLY TIMER Operation Up to 4 timer settings can be saved for each day of the week. It is convenient if the WEEKLY TIMER is set according to the family’s life style. ■ Using in these cases of WEEKLY TIMER An example of WEEKLY TIMER settings is shown below. 6:00 8:30 17:30 22:00 25˚C 27˚C 6:00 8:...
Page 21 - To use WEEKLY TIMER operation; Press the “SELECT button” to select the desired
20 WEEKLY TIMER Operation ■ To use WEEKLY TIMER operation • Make sure the day of the week and time are set. If not, set the day of the week and time. (page 8.) 1. Press “ button”. • The day of the week and the reservation number of the current day will be displayed. • 1 to 4 settings can be made per...
Page 25 - Note for Multi System; Selecting the operation mode; With the Priority Room Setting; OUTDOOR UNIT QUIET operation; With the Priority Room Setting active.; Cooling / Heating mode lock (Available only for heat pump models)
24 Note for Multi System 〈〈 What is a “Multi System”? 〉〉 This system has one outdoor unit connected to multiple indoor units. ■ Selecting the operation mode 1. With the Priority Room Setting present but inactive or not present. When more than one indoor unit is operating, pri-ority is given to the f...
Page 26 - Priority Room Setting; Priority when POWERFUL operation is used.
25 ■ Priority Room Setting The Priority Room Setting requires initial programming during installation. Please consult your retailer or dealer for assistance.The room designated as the Priority Room takes priority in the following situations; 1. Operation mode Priority. As the operation mode of the P...
Page 27 - Care and Cleaning; Units
26 CARE Care and Cleaning CAUTION ■ Indoor unit, Outdoor unit and Remote controller 1. Wipe them with dry soft cloth. ■ Front panel 1. Open the front panel. • Slide the two stoppers on the left and right sides inward until they click. 2. Remove the front panel. • Remove the string.• Allowing the fro...
Page 29 - Check; Operate the “FAN only” for several hours on a fine day to dry out the
28 NOTE Check ■ Before a long idle period 1. Operate the “FAN only” for several hours on a fine day to dry out the inside. • Press “MODE” button and select “FAN” operation.• Press “ON/OFF” button and start operation. 2. After operation stops, turn off the breaker for the room air conditioner. 3. Cle...
Page 30 - Trouble Shooting; These cases are not troubles.
29 TROUBLE SHOOTING Trouble Shooting The following cases are not air conditioner troubles but have some reasons. You may just continue using it. These cases are not troubles. Case Explanation Operation does not start soon. • When ON/OFF button was pressed soon after operation was stopped. • When the...
Page 32 - Disposal requirements; Call the service shop immediately.
31 WARNING ■ When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker OFF. Continued operation in an abnormal condition may result in troubles, electric shocks or fire.Consult the service shop where you bought the air conditioner. ■ Do not attempt to repair or modify...
Page 35 - MEMO
34 MEMO 01_EN_3P191290-1K.fm Page 34 Saturday, March 28, 2009 11:41 AM
(H)-Specifications/webp/1.webp){kind=small}
(H)-Service-Manual/webp/1.webp){kind=small}
