Daikin FTXS30LVJU- Installation Manual

4 Names of Parts Indoor Unit Panel tab INTELLIGENT EYE sensor It detects the movements of • people and automatically switches between normal operation and energy saving operation. Page 15 Room temperature sensor It detects the air temperature • around the unit. OPERATION lamp (green)TIMER lamp (yell...

5 English Outdoor Unit Open the front panel Appearance of the outdoor unit may differ from some models. • Refrigerant piping and inter-unit wiring Ground terminal Inside this cover. • Drain hose Model name plate Air inlet: (back and side) Air outlet Air fi lter Titanium apatite photocatalytic air-pu...

6 Names of Parts Remote Controller: ARC452A21 Signal transmitter Receiver To use the remote controller, aim the • transmitter at the indoor unit. If there is anything to block signals between the unit and the remote controller, such as a curtain, the unit will not operate.Do not drop the remote cont...

7 English Open the front cover ECONO button ECONO operation • Page 19 SWING button Adjusting the air fl ow direction • Page 12 COMFORT/SENSOR button COMFORT AIRFLOW and • INTELLIGENT EYE operation Page 14,15,16 : WEEKLY button : PROGRAM button : COPY button : BACK button : NEXT button WEEKLY TIMER o...

8 Preparation before Operation To set the batteries Slide the front cover to take it off. 1. Set two dry batteries AAA.LR03 (alkaline). 2. Set the front cover as before. 3. To fi x the remote controller holder on the wall Choose a place from where the signals reach the unit. 1. Fix the holder to a w...

9 English Checks on remote controller settings This remote controller is common to the heat pump model and cooling only • model. Use the DIP switch on the remote controller to set the heat pump model or cooling only model. Refer to the following explanation and make the setting as shown in the • ill...

10 AUTO · DRY · COOL · HEAT · FAN Operation The air conditioner operates with the operation mode of your choice. From the next time on, the air conditioner will operate with the same operation mode. To start operation Press 1. and select a operation mode. Each pressing of the button advances the mod...

11 English To change the air fl ow rate setting Press . DRY mode AUTO or COOL or HEAT or FAN mode The air fl ow rate setting is not variable. Five levels of air fl ow rate setting from “ ” to “ ” plus “ ” and “ ” are available. Indoor unit quiet operation • When the air fl ow is set to “ ” , the noi...

12 Adjusting the Air fl ow Direction You can adjust the air fl ow direction to increase your comfort. Adjusting the upper and lower air fl ow direction To adjust the louvers (horizontal blades) Press 1. . “ • ” is displayed on the LCD and the louvers will begin to swing. When the louvers have reache...

13 English Adjusting the 3-D air fl ow direction To start 3-D air fl ow 1. 3. Press the and the : the “ ” and “ ” display will light up and the louvers and fi ns will move in turn. To cancel 3-D air fl ow 2. 4. Press either the or the . COMFORT AIRFLOW operation Check COMFORT AIRFLOW operation in th...

14 COMFORT AIRFLOW Operation The fl ow of air will be in the upward direction while in COOL operation and in the downward direction while in HEAT operation, which will provide a comfortable wind that will not come in direct contact with people. To start COMFORT AIRFLOW operation Press 1. and select ...

15 English INTELLIGENT EYE Operation “INTELLIGENT EYE” is the infrared sensor which detects the human movement. To start INTELLIGENT EYE operation Press 1. and select “ ” on the LCD. Each time the • is pressed a different setting option is displayed on the LCD. The INTELLIGENT EYE lamp lights green....

16 INTELLIGENT EYE Operation “INTELLIGENT EYE” is useful for energy saving Energy saving operation Change the temperature –3.6°F (–2°C) in heating / +3.6°F (+2°C) in cooling / +3.6°F (+2°C) in dry mode from set temperature. • When the room temperature exceeds 86°F (30°C), the operation changes the t...

17 English POWERFUL Operation POWERFUL operation quickly maximizes the cooling (heating) effect in any operation mode. You can get the maximum capacity. To start POWERFUL operation Press during operation. POWERFUL operation ends in 20 minutes. Then the system automatically operates again with • the ...

18 OUTDOOR UNIT QUIET Operation OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by changing the frequency and fan speed on the outdoor unit. This function is convenient during night. To start OUTDOOR UNIT QUIET operation Press . “ • ” is displayed on the LCD. To cancel OUTDOO...

19 English ECONO Operation ECONO operation is a function which enables ef fi cient operation by limiting the maximum power consumption value. This function is useful for cases in which attention should be paid to ensure a circuit breaker will not trip when the product runs alongside other appliances...

20 TIMER Operation Timer functions are useful for automatically switching the air conditioner on or off at night or in the morning. You can also use OFF TIMER and ON TIMER in combination. To use OFF TIMER operation Check that the clock is correct. • If not, set the clock to the present time. Page 9 ...

21 English To use ON TIMER operation Check that the clock is correct. • If not, set the clock to the present time. Page 9 Press 1. . ” is displayed. ” blinks. “ “ “ • ” and day of the week are no longer displayed on the LCD. Press 2. until the time setting reaches the point you like. Each pressing o...

22 WEEKLY TIMER Operation Up to 4 timer settings can be saved for each day of the week. It is convenient if the WEEKLY TIMER is set according to the family’s life style. Using in these cases of WEEKLY TIMER An example of WEEKLY TIMER settings is shown below. Example: The same timer settings are made...

23 English To use WEEKLY TIMER operation Setting mode Make sure the day of the week and time are set. If not, set the day of the week and time. • Page 9 6:00 8:30 17:30 22:00 77°F (25°C) 81°F (27°C) Program 1 Program 2 Program 3 Program 4 ON OFF ON OFF [Monday] Setting Displays Day and number settin...

25 English Copy mode A reservation made once can be copied another day of the week. The whole reservation of the • selected day of the week will be copied. 6:00 8:30 17:30 22:00 77°F (25°C) 81°F (27°C) 6:00 8:30 17:30 22:00 77°F (25°C) 81°F (27°C) COPY Program 1 Program 2 Program 3 Program 4 ON OFF ...

26 WEEKLY TIMER Operation Con fi rming a reservation The reservation can be con fi rmed. • Setting Displays Normal display Con fi rmation display Press 1. . The day of the week and the reservation number of the current day will be displayed. • Press 2. to select the day of the week and the reservati...

27 English To deactivate WEEKLY TIMER operation Press while “ ” is displayed on the LCD. The “ • ” will be no longer displayed on the LCD. The TIMER lamp goes off. • To reactivate the WEEKLY TIMER operation, press • again. If a reservation deactivated with • is activated once again, the last reserva...

28 WEEKLY TIMER Operation The reservations for each day of the week This function can be used for deleting reservations for each day of the week. • Press 1. . Press 2. to select the day of the week to be deleted. Hold 3. for 5 seconds. The reservation of the selected day of the week will be deleted....

29 English Care and Cleaning CAUTION Before cleaning, be sure to stop the operation and turn the breaker off. Units Indoor unit and remote controller Wipe them with a soft cloth when dirty. • Front panel Open the front panel. 1. Hold the front panel by the panel tabs on the both • sides and open it....

30 Care and Cleaning Filters Open the front panel. 1. Page 29 Pull out the air fi lters. 2. Push the fi lter tab at the center of each air fi lter slightly • upward, then pull it down. Take off the titanium apatite 3. photocatalytic air-purifying fi lter. Hold the recessed parts of the frame and unh...

31 English Air fi lter Wash the air fi lters with water or clean them with vacuum cleaner. If the dust does not come off easily, wash them with • neutral detergent thinned with lukewarm water, then dry them up in the shade. It is recommended to clean the air fi lters every • 2 weeks. Titanium apatit...

32 Care and Cleaning NOTE Operation with dirty fi lters: • cannot deodorize the air. 1) cannot clean the air. 2) results in poor heating or cooling. 3) may cause odor. 4) To order titanium apatite photocatalytic air-purifying fi lter contact to the service shop there you purchased the air conditione...

33 English Troubleshooting These cases are not troubles. The following cases are not air conditioner troubles but have some reasons. You may just continue using it. Case Explanation Operation does not start soon. When ON/OFF button was pressed soon after • operation was stopped.When the mode was res...

35 English Call the service shop immediately. WARNING When an abnormality (such as a burning smell) occurs, stop operation and turn the breaker off. Continued operation in an abnormal condition may result in malfunctioning, electric shocks or fi re. • Consult the service shop where you purchased the...