Page 2 - PROJECTION TV; CAUTION
PROJECTION TV -1- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is inte...
Page 3 - IMPORTANT SAFEGUARDS; Read, Retain and Follow All Instructions
IMPORTANT SAFEGUARDS -2- 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructionsfor future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the applian...
Page 5 - Warning
Warning -4- This section must be read carefully and followed by theuser prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately. Take...
Page 6 - Caution
Caution -5- Please keep the user's manual in a safe place for future reference. This section must be read carefully and followed by the user when installing and transporting the product. Do not put volatile substance-such asbenzene, naphtha- near the product since itmay cause a change in the product...
Page 7 - This product has advantages as follows.; Make Sure of Auxiliary Parts.; Large Screen; Adoption Dolby Virtual; Information of setting up TV
This product has advantages as follows. -6- Make Sure of Auxiliary Parts. MAIN POWER STAND BY TIMER VOL CH MENU TV/COMP. TV/VIDEO POWER Large Screen You can enjoy favorite broadcasting by using alarge screen with the size of 55”/47” bases onprojection technology. Various Screen You can watch various...
Page 8 - Table of Contents; Installation and Maintenance
Table of Contents -7- Installation and Maintenance Antenna Connection 8 Video Connection 11 Camcorder & Play station Connection 12 DVD Connection 13 Audio Connection 14 Digital Satellite Receiver Connection 15 Cable TV Broadcasting Connection 16 Name of Each Part 18 Basic Guide To setup device c...
Page 9 - Antenna Connection; Indoor Antenna Connection
Antenna Connection -8- 1. Connect the feeder cable of the antenna to the combining adapter. 2. Connect the combining adapter to the antenna input at the back of the TV set. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and badreception may be a cause of wrongantenna connection. Be sure to checkit...
Page 10 - CTV Antenna Connection
-9- Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. When a feeder cable is used ANT/CABLE 1 ANT/CABLE 1 CTV Antenna Connection
Page 11 - Outdoor Antenna Connection
-10- Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at privatehouses Single Antenna Connection. Separate Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 ANT/CABLE 1 Outdoor Antenna Connection
Page 12 - Connecting with an Antenna; Video Connection; Connection Guide; Connecting with an External Source
The following connection allows you to record TV programs. Connecting with an Antenna Video Connection -11- You may connect S-Video input to enjoy a clearer and brighter picture images. You can choose and make the connection with any one of Video 1,2, or 3 inputs. ANT/CABLE 1 Connection is not neces...
Page 13 - Camcorder & Play station Connection; Watching the Camcorder Recording on TV
Camcorder & Play station Connection -12- -Use the input jack provided at the side panel of the TV set -Use the same connection method for playstation -Connect the camcorder and video as follows. -Turn the camcorder's video output switch on, and play the recorded material. -Press the "TV/VIDE...
Page 14 - DVD Connection; DVD
DVD Connection -13- -480i input signal is possible for DVD input. -DVD screen output is composed of three separate primary color jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players. -The DVD player s audio output must be conn...
Page 15 - Audio Connection; Standard Audio Connection
Audio Connection -14- -You may minimize the volume of the TV set, and listen to the sound. -The default status of Dolby Virtual is in Line out: Internal . Standard Audio Connection
Page 16 - Digital Satellite Receiver Connection; Watching High Definition Digital Broadcasting
Digital Satellite Receiver Connection -15- The signal input of 1080i, 720p, and 480p are available in this product. You may use a general A/V jack for its connection. Digital Satellite Receiver Watching High Definition Digital Broadcasting
Page 17 - Cable TV Broadcasting Connection; Antenna Input Connection; External Input Connection Source
Cable TV Broadcasting Connection -16- Watching cable television is only possible after you have subscribed to the local broadcasting company andinstalled a cable receiver. You may make the connection to any of the Video input 1, 2, & 3. Antenna Input Connection Watching cable television is only ...
Page 19 - Name of Each Part; Front Panel
Name of Each Part -18- Buttons on the TV set have the same function as those of the remote controller. Front Panel Button If you turn the TV set off by pressing the main power button at this panel, it is as unpluggingthe power cord from the outlet since this will prevent all operation of both the TV...
Page 20 - Back Panel; Side and Rear Panel
-19- Side Panel It is convenient to use the input jacksprovided at the side panel when connectingto the camcorder or play station. It is alsoconvenient when connecting a personalcomputer to the TV set, and when listeningto the sound through headphones. Back Panel Side and Rear Panel
Page 21 - Parts of the remote controller
-20- This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. Power TV/VCR/CATV Channel number (0-9) Use to select channel directly 0~9 Prev It returns to previous channel. TV/Component TV Component 1 Component 2 TV CH ▲/▼ Mute Sound Mode This feature allows you to c...
Page 23 - To setup device change of remote control; METHOD TO SETUP DEVICE CHANGE OF REMOTE CONTROL; Method to setup device change of remote control
To setup device change of remote control -22- - The remote control is setup to be used for operating the HDTV provided together. You may also setup the remote control in order to operate cable TV receiver or video, etc with a remote control. METHOD TO SETUP DEVICE CHANGE OF REMOTE CONTROL • Ensure t...
Page 24 - Method To Use Basic Menu; P I C T U R E; Press the “Menu” button.; Press the “; Basic Menu
Method To Use Basic Menu -23- - Basic menu appears on the screen if pressing the menu button of the remote control.- There are 5 items of Picture, Sound, Function, Set up and Special in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are di...
Page 25 - To Watch TV
To Watch TV -24- - Buttons with same name in the main body performs same function. When pressing the Channel button •Select two digits if using the number button for channel selection.For example, to watch the No.9 channel,Press the number button 0 and 9.If pressing only number 9, it takes long time...
Page 26 - Press the “Main Power” button.; Press the “Power” button for turning the TV off.
-25- Press the “Main Power” button. • Press the “Main Power” button of the main body. • The main power lamp turns on in red color. • Press the “Power” button of the main body or the “Power” button of theremote control. • The main power lamp turns on in “green” color and the TV turns on. POWER Press ...
Page 27 - Automatic Channel Memory
Automatic Channel Memory -26- Press the “Menu” button. • The menu screen appears as follows. • Press the “ ◀ VOL ▶ ” button until the “ △ ” mark will come on the “Set up”. • Press the “CH ▲ ” button if the “ △ ” mark will come on the “Set up”. Select the “Air/Cable” by pressing the “ ▼ CH ▲ ” button...
Page 29 - Select the Channel to memorize.; ERASE; Check the Channel by pressing the “; Additional Channel Memory
-28- - This is method for additionally memorize channels not memorized due to weak broadcasting signal. - This function is available even in the <Menu> - <Set Up> - <Ch Edit> - <Add/Erase>. Select the Channel to memorize. • Select the Channel by pressing the number button.Ex)...
Page 30 - Select the Channel to erase.; Erase of Memorized Channel
-29- Select the Channel to erase. • The Channel to erase with the “ ▼ CH ▲ ” button. • You may select the Channel by pressing the number button. Ex) “13” channel Press the “Add/Erase” button. • If pressing the “Add/Erase” button, the Channel numberchanges from green color to redcolor. • Add – Erase ...
Page 31 - Minute Adjustment of Channel
-30- - This is function to clearly adjust the screen to the minute part when any Channel screen appears as a dotted line or when no color appears or when a stripe figure appears or when the screen is unstable. Select the Set up with the “Menu” button and the “ ◀ VOL ▶ ” button. • The “ △ ” mark appe...
Page 33 - Selection of Input Signal
Selection of Input Signal -32- Press the “TV/VIDEO” button. • Screen changes as follows whenever pressing the “TV/Video Input” button. - See 11p for connection method of TV and “Video”.- You cannot designate channels when watching video. When watching video, Camcorder, Cable TV Notices: Cautions in ...
Page 34 - When watching DTV and DVD (component input)
-33- - See 13p, 15p for connection method of DTV and DVD (component input). - Input component video (called as color difference signal) as DVD signal. Press the “TV/COMP.” button. • The screen changes whenever pressing the button once. Component 2 Component 1 When watching DTV and DVD (component inp...
Page 35 - Method to watch by using Menu button
-34- Press the Menu button. Select “Component 1” or “2” from the “Special”. • Component Off is repeated whenever pressing the “VOL ▶ ” button. • Component 1 is repeated whenever pressing the “VOL ▶ ” button. • Component 2 is repeated whenever pressing the “VOL ▶ ” button. • Press the “ ◀ VOL ▶ ” but...
Page 36 - Screen Adjustment; Press the “Auto Picture” button.; When setting up various screen mode
Screen Adjustment -35- - The user may select various screens designed in good appearance in respect of a professional without adjusting the screen individually. Press the “Auto Picture” button. • The screen adjustment status changes as following screens are displayed sequentially wheneverpressing th...
Page 37 - When removing screen noise
-36- Press the “Menu” button. Press the “ VOL ▶ ” button. • If pressing the “Volume ◀▶ ” button, On and Off of thePicture NR function arerepeated. • Select On to select the Picture NR function. • Press the “ ◀ VOL ▶ ” button until the “ △ ” mark will come on the “Picture”. • Press the “CH ▲ ” button...
Page 38 - Press the “Menu” button and “Picture”.; When adjusting the screen to taste; Notice
-37- - You can enjoy various screens by adjusting Brightness, Contrast, Sharpness, Color, Tint, etc to the user’s taste. Press the “Menu” button and “Picture”. • Press the “ ◀ VOL ▶ ” button until the “ △ ” mark will come on the “Picture”. • Press the “CH ▲ ” button if the “ △ ” mark will come on th...
Page 39 - Press the “Screen Size” button.; Adjustment of Screen Size
-38- - Randomly change the size of the screen. Pleasure for enjoying the TV increases further.- This mode does not operation in the component 1 and 2 terminal. (However, the mode operates when 480i is entered into the component 1 and 2 terminal.) - The 16:9 screen operates when power is turned on fi...
Page 40 - Press the “Caption” button.; Method to Setup the “Caption” with Menu button
-39- - You can watch in character (English) as well as hear sound in watching English caption program. Press the “Caption” button. • Setup performed once continues to keep the status as it is. CAPTION Select “Caption” after selecting the “Menu” buttonand “Function”. • Off - CC1 - CC2 - CC3 - CC4 is ...
Page 41 - Setup of Parental Lock
-40- - This is function to protect children or juveniles from the harmful broadcasting or videotapes. Press the “Menu” button. • Main menu appears as in the right drawing. Select “Function”. • Select “Function” with the “ △ ” mark by using the “ ◀ VOL ▶ ” button. • Sub-menu appears if pressing the “...
Page 44 - Exit from the “Parental Control” menu.
-43- “Change Password”. • In the initial purchase of TV set, password is set to blank. In continuous use of Parental Control, you need to change your password. • If pressing the “ ◀ VOL ▶ ” button after selecting password, the second screen of below drawing appears. Here, newly enter your unique pas...
Page 45 - Selection of PIP; Press the “Menu” button and select “Function”.; When selecting various PIP
Selection of PIP -44- Press the “Menu” button and select “Function”. • Select “Function” with the “ △ ” mark by using the “ ◀ VOL ▶ ” button. • Sub-menu appears if pressing the “CH ▲ ” button. Select “PIP” by pressing the “ ▼ CH ▲ ” button. 3. Press the “ ◀ VOL ▶ ” button from the “PIP”. • The scree...
Page 46 - Selection of Auxiliary Screen Position
-45- Press the “PIP” button and press the “ ▼ CH ▲ ” button of the “PIP”. • Select the Channel by pressing the “ ▼ CH ▲ ” button at the right of the “PIP” button. • The memorized Channel of the auxiliary screen can be selected. Press the “PIP” button and press the“Position” button. Position of the a...
Page 47 - When converting both main screen to auxiliary screen
-46- Press the “PIP” button and then press the “SWAP”button. • The main screen changes to auxiliary screen and auxiliary screen changes to main screen. In case ofMain/Auxiliaryscreen In case of bothscreens SWAP When converting both main screen to auxiliary screen PIP
Page 48 - -screen Channel Search Function
-47- Press the “Search” button. The “ ▶ ” mark sequentially moves on the search screen whenever pressing the position button on the search screen. If pressing the Main/Auxiliary Conversion button on thesearch screen, the search screen with the “ ▶ ” mark and the main screen converts each other. 4-sc...
Page 49 - Still of Main Screen; Still of Auxiliary Screen; Still
Notice Selection of input signal from the auxiliary Press the “TV/VIDEO” button inside of the remote control on the PIP. • You can watch video, cable broadcasting, etc on the auxiliary screen.• This mode does not operation in the component 1 and 2 terminal. Use the still function of external sets(DV...
Page 50 - Sound Adjust; Press the “Sound Mode” button.; When selecting various sound modes
Sound Adjust -49- Press the “Sound Mode” button. • Sound status changes while the following screens displays in turnwhenever pressing the SoundMode button. SOUND MODE When selecting various sound modes
Page 51 - When adjusting sound to taste
-50- Select “Sound” by pressing the “Menu” button. • The menu screen appears as follows: Select items desired to adjust and press the “ ◀ VOL ▶ ” button. • You can select item in the order of Mode → Balance → Equalizer whenever pressing thebutton. What’s equalizer? • High quality sound range adjustm...
Page 52 - In case of adjusting equalizer; VOL; Dolby Virtual Sound; Press the “Dolby Virtual” button.
-51- In case of adjusting equalizer • Select the Equalizer by pressing the “ ▼ CH ▲ ” button. • If pressing the “ ◀ VOL ▶ ” button, the Equalizer Adjust mode appears. 0.1 kHz, 0.3 kHz Low Sound Range 1.0 kHz, 3.0 kHz Middle Sound Range 10.0 kHz, 0.3 kHz High Sound Range Select and use the relevant f...
Page 53 - In Multi-sound and Stereo Broadcasting; Press the “MTS” button.; Multi-Sound and Stereo
-52- In Multi-sound and Stereo Broadcasting Press the “MTS” button. • The status changes while following screens sequentially appears when pressing the button. MTS Multi-Sound and Stereo - You can select to your taste since multi-sound broadcasting is broadcast in the order of Mono → Stereo → SAP. -...
Page 54 - Press the “Menu” button if time setup is completed.; Adjustment of Current Time
-53- Press the “Menu” button and select “Function”. • Select “Function” by pressing the “ ◀ VOL ▶ ” button and then press the“CH ▲ ” button. - You must previously adjust current time in order to reserve Automatic On/Off. Press the “Timer” for selection. • Select “Timer” by pressing the “ ▼ CH ▲ ” bu...
Page 55 - Select “Off Time” by pressing the “
-54- The red lamp turns on even setting up either of Off-time/ On-time.This function is very convenient since TV is automatically turned off at the fixed time if reserving the Off-time forsleeping time or at desired time. If adjusted once, this function operate everyday unless canceling the Off-time...
Page 56 - Press the “SLEEP” button.; Reservation of Sleep Time
-55- - This is function to reserve so that TV turns off after a fixed time (10 min. ~ 90 min.) has passed from the current time. - Adjust sleep time with sleep reservation button of a remote control. Press the “SLEEP” button. • Sleep Off → Sleep 10 → Sleep 20 → Sleep 30 → Sleep 60 → Sleep 90 → Sleep...
Page 57 - Adjustment of Color Match
Adjustment of Color Match -56- Press the “Menu” button. • The Menu screen appears as in the right. Select “Special”. • Select “Special” with the “ ◀ VOL ▶ ” button. • The extension appears if pressing the “CH ▲ ” button. ( Adjustment of Color Match - Perform this adjustment when color looks separate...
Page 59 - Selection of Language
Selection of Language -58- Press the menu button and select “Function” Select language the “ ▼ CH ▲ button” Press the “ ◀ VOL ▶ button from Language. This function enables to select language of the OSD displayed on the TV screen.Language of the OSD consists of English, French and Spanish. Language o...
Page 60 - Troubleshooting; Symptoms and Solutions
Troubleshooting -59- Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Service Center for assistance Is the TV power cord pluggedinto the outlet correctly?Please check the power cordand connect it properly to theoutlet.Press the main power button atthe front ...
Page 61 - Standard of Product
Standard of Product -60- Consult the service center after promptly cleaning thisproduct with clean water and drying it at a shade.Never plug-in the power cords since electrical shock ordamage of part may occur. DSJ-4710CRA/4720CRA Model DSJ-5510CRA/5520CRA VHF 2~13, 14~69 Receipt Channel VHF 2~13, 1...
