Page 2 - F e a t u r e s
2 This Owner’s Manual presents safety precautions and how to use the product.After reading it thoroughly, use the product safely.Keep this manual where the user can see it easily. Failure to comply with warnings and cautions for the safe use of electricappliances may cause fire or human injury. • 42...
Page 3 - which the receiver is connected.
F C C R F I N T E R F E R E N C E S T F C C R F I N T E R F E R E N C E S T A A T E M E N T T E M E N T NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsa r e d e s i g n e d t o p r o v i d e r e...
Page 4 - Always obey all; Safety Precautions; WARNING; Power
Always obey all safety messages. • All the safety and operatinginstructions shouldbe read before theproduct is operated.If anything strangehappens, unplugthis product fromthe wall outlet. • Do not disassemble or replace any partsof the monitor.Refer to a qualifiedservice personnelfor fepair. Safety ...
Page 5 - While Using Monitor
5 While Using Monitor Do not open cover (or back) becausehigh voltage is present within themonitor’s enclosure. It may cause electric shock. Never push objects of any kind intothis product through openings at theback of monitor. It may cause fire or electric shock. No objects filled with liquids, su...
Page 6 - CAUTION
Always obey all safety messages. • All the safety and operating instructionsshould be read beforethe product isoperated. Safety Precautions 6 Power Installation CAUTION You can be injuredor this product orany other yourproperty can bedamaged if youdon’t followinstructions. When moving your monitor, ...
Page 7 - During Use
7 7 During Use CAUTION You can be injured or thisproduct or any other yourproperty can be damaged ifyou do not followinstructions. Do not wipe the monitor using acloth damped with chemicals(benzene, thinner, etc.). Monitor appearance may be marred.(Unplug the power plug and wipe with softcloth.) Do ...
Page 8 - Note; Checking Accessories; Supplied Accessories
8 INPUTSELEC T POW ER DISPLA Y ZOOM - PIC TU RE MO DE SC REENMO DE FR EE ZE MU TE SO UN D MO DE SLEE P ZO OM + ME NU VOL VO L Remote Control 1 UNIT Batteries (AAA) 2 UNITS AC Cable 1 UNIT PC(15pin) Cable 1 UNIT A/V Cable 2 UNITS Audio Cable 1 UNIT Note Check to be sure that the following items arepa...
Page 9 - Optional Accessories; Wall Mounting Unit
9 Note The following items are optional accessories. Refer purchasing optional accessories fromDaewoo Electronics Local Dealer or the dealerfrom where you purchased the unit. Optional Accessories DSP-SP20/SP21/SP22 - Speaker Main Unit Dimension : 3.94(W) x 24.72(H) 3.27(D)inch - Including Speaker St...
Page 11 - C O N T E N T S
11 4 • Safety Precautions12 • Panel Controls13 • Remote control PREPARATION BASICS 14 • Installation Instructions15 • Connecting Speaker to PDP CONNECTION 16 • Watching Digital Broadcasts18 • Watching Cable Broadcasts20 • Watching Satellite Broadcasts22 • Watching a DVD Image24 • Watching a VCR Imag...
Page 12 - Panel Controls; Front
Panel Controls 12 Front Panel, Back Panel, Remote Control * Parts having same names in Plasma Display and Remote Control would function in exactly the same way. Front Rear PC INPUT UPGRADE PORT DTV/DVD INPUT VIDEO INPUT SPEAKER(8 OHMS) R L L R AUDIO L- AUDIO -R L- AUDIO -R VIDEO S-VIDEO PC INPUT UPG...
Page 13 - Remote Control; When Using Remote Control:; Installing the Batteries in your Remote Control:
13 Remote Control When Using Remote Control: • Be sure not to allow the Remote Control to drop or to become wet. • Keep it away from hot or moist locations. Installing the Batteries in your Remote Control: • To remove the cover, slide it outwards while pressing it down. • Place two batteries in the ...
Page 14 - Installation Instructions; When Using the Stand; Erect the Display
14 Installation Instructions When Using the Stand (Assembled Picture) M5 SCREWS Take out the STAND from thepackage. 1 Engage the assembled standwith 4 screws (M5) enclosed. 3 Smoothly fit the Stand to thePlasma Display Panel 2 Erect the Display 4 * When installing PDP Main Unit, be sure it is done b...
Page 15 - Connecting the Speaker to the PDP
15 Connecting the Speaker to the Stand 1 Connecting the Speaker Cable 2 • By using a (-) driver or coin, fasten thespecial screwsecurely. Be sure to check ifthere is a spongeattached to thesurface on which thespeaker is contacted. • Connect one set (two cables) of the cable to the terminals on the b...
Page 16 - Watching Digital Broadcasts; Press the Power Buttons; Digital Broadcasting Receiver
Watching Digital Broadcasts • To watch digital broadcasts:- Purchase a separate digital BroadcastingReceiver(SET-TOPBOX) - Connect the PDP to a Cable BroadcastingReceiver that isprovided by acompany which re-transmits digitalbroadcasts. 16 Watching Digital Broadcasts Press the Power Buttons • Press ...
Page 17 - Input Select; Select a Desired Channel and Function
17 Input Select INPUT SELECT • Select [Component 1 or Component 2] by pressing the INPUT SELECT button of theRemote Control or the PDP unit. • Each time you press the INPUT SELECT button, different input modes appear. Thesequence is as follows: Component 1 -->Component 2 --> Video 1 --> Vid...
Page 18 - Watching Cable Broadcasts; Cable Broadcasting Receiver
Watching Cable Broadcasts • To watch cable broadcasts,subscribe to yourlocal Cable TVBroadcasting, andthen, connect thedigital set-top box forcable TV to the PDPas shown below. Watching Cable Broadcasts 18 Press the Power Buttons • Turn the PDP and the Receiver ON. 2 Connect a CABLE Broadcasting Rec...
Page 20 - Watching Satellite Broadcasts; Satellite Broadcasting Receiver
Watching Satellite Broadcasts • To watch satellite broadcasting,subscribe to a DigitalSatelliteBroadcasting, thenconnect the digitalset-top box forsatellitebroadcasting to thePDP as shownbelow. Watching Satellite Broadcasts 20 Press the Power Buttons • Turn the PDP and the Receiver ON. 2 Connect a S...
Page 22 - Watching a DVD Image; Connect a DVD Player to the PDP.
Watching a DVD Image • Component Input is set to 480i and 480pmode. • Connect the cable from the DVD VideoOutput (Y, Pb/Cb,Pr/Cr) to theComponent Input atthe back PDP, andconnect the cablefrom DVD Audiooutput (Left, Right)to the Audio Input atthe back of PDP. Watching a DVD Image 22 Press the Power ...
Page 23 - Select a Desired Title and Function
23 Input Select INPUT SELECT • Select [Component 1 or Component 2, Video1, Video2] by pressing the INPUTSELECT button of the Remote Control orthe PDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. Thesequence is as follows: Component 1 -->Component 2 --> V...
Page 24 - Watching a VCR Image; Connect a VCR to the PDP.
Watching a VCR Image • Video can use either the normal videoterminal or theS-video terminal. Watching a VCR Image 24 Press the Power Buttons • Turn the PDP and the VCR ON. 2 Connect a VCR to the PDP. • Prepare the AV cable.• Connect the Video(Output) to PDP(Video Input) as shown below. 1 VIDEO INPUT...
Page 26 - Watching a Camcorder/Game Console Image; Game Console/Camcorder
Watching a Camcorder/Game Console Image • Enjoy images recorded bycamcorder or thegame console afterconnecting to thePDP. Watching a Camcorder/Game Console Image 26 Press the Power Buttons • Turn the PDP and the Camcorder/Game Console ON. 2 Connect a Camcorder/Game Console to thePDP. • Prepare the A...
Page 28 - Connecting PC; Connect the PC to the PDP.
Connecting PC • DAEWOO PLAZMA supports resolutionof VGA, SVGA,XGA, SXGA, UXGA. • Before connecting a PC to the PDP, besure to adjust theresolution of PC. • This product is not supported by Plugand Play, so selectStandard Monitorwhen setting PCmonitor. Connecting PC 28 Connect the PC to the PDP. • Pr...
Page 29 - Press the Power button.
29 Input Select INPUT SELECT • Select [PC] by pressing the INPUT SELECT button of the Remote Control orPDP unit. • Each time you press the INPUT SELECT button, a different input mode appears. Thesequence is as follows: PC --> Component 1 --> Component 2 -->Video 1 --> Video 2. Enjoy Dyna...
Page 30 - PC Input Resolution Available in PDP
PC Input Resolution Available in PDP Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Remark 30 3 1 . 4 6 93 7 . 8 6 12 4 . 8 2 3 3 0 . 4 8 3 1 . 4 6 93 7 . 8 6 13 1 . 4 6 9 3 5 3 7 . 8 6 1 3 7 . 5 3 9 . 3 7 54 3 . 2 6 9 3 1 . 4 7 3 1 . 4 6 93 7 . 9 2 7 3 1 . 5 41 5 . 6 3 3 5 . 1 5 6 3 5 ...
Page 31 - Selecting Picture Mode; Menu on the Screen Will Disappear.; Selecting Auto Picture Mode
Selecting Auto Picture Mode • Select the Picture modes that are automatically setdepending on the kindsof pictures, and enjoythem. Selecting Picture Mode PICTURE MODE • Press the [PICTURE MODE] on the Remote Control. • Pressing the [PICTURE MODE] first time will display the current PICTURE MODE. Eac...
Page 32 - Customizing Picture; Press the; Select the Custom Mode.
Customizing Picture • You can adjust the color tone andbrightness to yourpreference. Customizing Picture 32 INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the / Button. • After selecting [Picture] by the / buttons, press the button tha...
Page 34 - Adjusting Screen Size; Press the SCREEN MODE Button.
Adjusting Screen Size • You can adjust screen size oraspect ratio asdesired. Adjusting Screen Size 34 INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the SCREEN MODE Button. • Each time you press the SCREEN MODE button on the Remote Con...
Page 35 - Press the MENU Button.; Select the Screen Size.; Adjusting from
35 Press the MENU Button. • Press the [MENU] button on the Remote Control. Select “Screen”. • Press the Channel / buttons to select “Screen.” Select the Screen Size. • Press the Volume / buttons to select “Screen Size”. 3 1 2 Adjusting from MENU Screen Picture Sound Screen Utility Input Mode Brightn...
Page 36 - Adjusting Screen Position and Size
Adjusting ScreenPosition and Size • You can adjust the screen position andsize as desired. • This function is only used when adjustingthe screen positionand size on the PDPmonitor by using thePC input signal. INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE ZOOM+ MENU VOL VOL Press t...
Page 38 - Enlarging; Enlarging Screen Size
INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the ‘ZOOM+’ Button. • Press the ‘ZOOM+’ button to show currently selected screen size. • Each time you press the ‘ZOOM+’ button, the screen size will increase stepwise in 0 ~ 20 scale. • T...
Page 39 - Move the Screen Position.
Move the Screen Position. • While you are in the ‘Zoom’ mode, press the / , / buttons to move screen stepwise up/down, left/right, respectively. 2 39 NOTES: * When the screen is enlarged, the pixel of the screen can become thick and dim. * When only subtitle of zoom level remains, you can scroll the...
Page 40 - Press the ‘FREEZE’ Button.; Watching a; Watching a Still Image
INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Press the ‘FREEZE’ Button. • If you wish to freeze a picture, press the ‘FREEZE’ button. You can still hear the sound. • Press FREEZE button to cancel the ‘FREEZE’ function. • To view the enlarg...
Page 41 - Adjusting Auto Sound Mode; Every Press of the Button Changes Modes.; SOUND
Adjusting Auto Sound Mode • Enjoy various sound modes by selectingyour favorite SoundMode depending onthe kinds of movingpictures. Adjusting Auto Sound Mode 41 INPUT SELECT POWER DISPLAY ZOOM- PICTURE MODE SCREEN MODE FREEZE MUTE SOUND MODE SLEEP ZOOM+ MENU VOL VOL Select SOUND Mode. SOUND MODE • Pr...
Page 42 - Customizing Sound Mode; Select SOUND BALANCE.
CustomizingSound Mode • This feature allows the user at adjust athis preference. Customizing Sound Mode 42 Press the / Button. • Select [SOUND] by the / buttons, then press the button to display the following. Select SOUND BALANCE. • Select [SOUND BALANCE] by the / buttons, then adjust it. • Sound b...
Page 43 - Select the Spatial Effect Mode.; Select the SOUND Mode.
Select the Spatial Effect Mode. • Select Spatial Effect by pressing the / buttons, then select ON/OFF by pressing the button. • Spatial Effect: Used to feel grotesque by emphasizing stereo effect. Select the SOUND Mode. 4 5 Picture Sound Screen Utility Input Balance Spatial Effect Sound Mode On Norm...
Page 44 - INPUT SIGNAL; Selecting INPUT SIGNAL; Press the INPUT SELECT Button.
INPUT SIGNAL • Used to select INPUT signal ofexternal deviceconnected to thePDP. Selecting INPUT SIGNAL 44 Press the INPUT SELECT Button. INPUT SELECT • Press the [INPUT SELECT] button on the Remote Control or the PDP Display to select [COMPONENT 1] or [COMPONENT2]. • Each time you press the [input ...
Page 45 - Adjusting from the; Select INPUT SIGNAL.
45 Press the MENU Button. MENU • Press the [MENU] button on the Remote Control. 1 Adjusting from the MENU Screen Select INPUT. • Select [INPUT] by the / button. Select INPUT SIGNAL. • Select [INPUT SIGNAL] by the / buttons, then press the button. 3 2 Picture Sound Screen Utility Input Mode Brightnes...
Page 46 - Checking the Current Input Signal; Press the DISPLAY Button.
Checking the Current Input Signal • Used to check the INPUT signal mode,resolution,frequency, etc. of thecurrent screen. Checking the Current Input Signal 46 Press the DISPLAY Button. DISPLAY • Press the [DISPLAY] button on the Remote Control. 1 1. If you watch Digital Broadcasts: Displays which inp...
Page 47 - Selecting MENU Background Screen and Language
Selecting Languages • Used to select transparency of thebackground screenand language usedin MENU. Press the MENU Button. MENU • The MENU screen will be displayed as below. Press the / Button. • Select [Utility] by the / button. Select the MENU Background Screen. • Select the [MENU Background Screen...
Page 48 - Selecting MENU Background Screen and Languages; Select MENU LANGUAGE SELECT by the; INITIALIZATION will Start.
INPUT SELECT POWER DISPLAY ZOOM- ZOOM+ MENU VOL VOL Back to Initialization • You can restore the values of theadjustment/settingmade in the MENUto factory settings. Selecting MENU Background Screen and Languages Select MENU LANGUAGE SELECT by the / Button. • Select LANGUAGE by the / button. • Every ...
Page 49 - Press the SLEEP Button.; Setting Sleep Timer
Setting Sleep Timer • SLEEP TIMER turns the Monitor off aftera preset time. Press the SLEEP Button. SLEEP • Press the [SLEEP] button on the Remote Control.• Pressing the [SLEEP] button first time will display the current setting for SLEEP TIMER. • To cancel the SLEEP TIMER, press the Sleep button to...
Page 50 - Before Requesting Service; Before Requesting for a Service
Before Requesting Service 50 Before Requesting for a Service S t y o m m p s C h e c k s A c t i on • There are empty spots at the top and the bottom area of the screen. • Check if the screen size of an image is wider than 16:9 aspect ratio(theater screen size). • When video screen is wider than 16:...
Page 51 - SPECIFICATIONS; DISPLAY UNIT
51 SPECIFICATIONS In the event that the product has been submerged in the waterin rainy season: Immediately wash it with clean water, and dry it in ashadow place,then call for service from the nearest Daewoo Service Center.Never plug the Power Cord since there is risk of electric shock anddamag of t...
