Page 2 - INTRODUCTION; Safety Instructions; Precautions
INTRODUCTION i Safety Instructions Safety Instructions Please keep the product’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your product. • Read this page and ch...
Page 3 - iii; Important Safeguards; RISK OF ELECTRIC SHOCK
INTRODUCTION iii ii Important Safeguards Important Safeguards Important Safeguards IMPORTANT FOR LASER PRODUCTSLASER This Digital Video Disc Player employs a Laser System. To ensure proper use of this product pleaseread this owner’s manual carefully and retain for future reference. Should the unit r...
Page 4 - One Touch Copy - VHS to DVD; iv; Table of Contents
INTRODUCTION 1 Important Safeguards _________________________iTable of Contents ______________________________1Overview ______________________________________2Identification of Controls_______________________6 INTRODUCTION Connecting Antenna/Cable ____________________12Connecting a TV ______________...
Page 5 - • existing DVD video discs can be played on the recorder.; Overview; Which discs you can use; The following discs can be used in your DVD Recorder+VCR:; Playback and recording; Not all recordable CDs may be played by your player.; Regional code; ALL; Dual Media; All disc can playback
INTRODUCTION 3 Disc-related Terms Title (DVD only) The main film, accompanying feature content, or music album. Each title is assigned a title reference numberenabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles. A title is composed...
Page 6 - Caution; Notes on Discs; Yes; About DVD Recording
INTRODUCTION 5 Cleaning the Unit To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a milddetergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damagethe surface of the unit. To obtain...
Page 7 - Front Panel; Insert a video cassette here.; Identification of Controls
INTRODUCTION 7 6 Front Panel ! POWER (STANDBY/ON) Turns the DVD Recorder+VCR on and off. @ Cassette Compartment (VCR deck) Insert a video cassette here. # Disc Tray (DVD deck) Insert a disc here. $ VCR EJECT Ejects the tape in the VCR deck. % REC Starts recording. Press repeatedly to set therecordin...
Page 8 - Remote Control
INTRODUCTION 9 Selects a subtitle language, if available. - Starts playback.- Pauses playback or recording temporarily. Press again to exit Pause mode. Selects an audio language (DVD), audio channel (CD) or audio type (TV). Displays the edit menu for DVD+RW/+R discs or sets a chapter marker. Enlarge...
Page 9 - Rear panel; Progressive Scan Mode; will not be correct colour for Component video.
INTRODUCTION 11 10 Rear panel Identification of Controls ! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audioinputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr)inputs. $ Scart socket 2 Connection of ...
Page 10 - CONNECTIONS; RF Connection; Connecting a TV; Connections; Connecting Antenna/Cable; Disconnect the antenna/cable from the rear of your TV.
CONNECTIONS 13 12 Connections Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied75-ohm RF cable (R). If you use this connection, tune y...
Page 11 - Connecting Optional Equipment; Connecting an Amplifier/Receiver; a strong, distorted sound or no sound at all.
CONNECTIONS SETUP 15 14 Connections To receive audio/video signals from other equipment, connectthe AVF jacks on the DVD Recorder+VCR to the audio/videoout jacks on your external component, using optionalaudio/video cables. Connecting Optional Equipment Using the front panel DV IN jack, it is possib...
Page 12 - SETUP; Initial Setup; ] and [ENTER] on the remote control to view the first and second; Initial Setup Screen; Setup Menu Overview; Manual Setting; While ‘Installation‘ is selected, press [; Initial Installation; Select the country which you want to, then repeat the steps as above.
SETUP 17 16 Initial Setup Initial Setup The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Editand Timer Recording. Press [SETUP], [ œ / √ ] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup...
Page 13 - NB. You must backspace any digits already in the name box before
SETUP 19 18 Initial Setup Initial Setup Clock Set1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use [ … / † ] to select ‘Clock Set‘. 3 Press [ENTER]. The ‘Clock Set’ menu appears. 4 Enter the date and time. œ / √ (left/right): Moves the cursor to the previous or next column. … / † (up/down): Chan...
Page 14 - Auto Chapter; Off; DVD Record Quality; HQ; VCR Record Quality; ‘Recording Options’ Settings; Overwrite
SETUP 21 20 Initial Setup Initial Setup Adjust Channels1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use [ … / † ] to select ‘Adjust Channels‘. 3 Press [ENTER]. The ‘Adjust channels’ menu appears. 4 Use [ … / † ] to select the PR number you want to adjust. Then press [ENTER]. Delete After tuning...
Page 15 - OSD Language; ‘Language’ Settings; Video Output; Interlace or Progressive :; ‘Preferences’ / Video Settings
SETUP 23 22 Initial Setup Initial Setup OSD Language Select a language for the DVD Recorder+VCR Setup menu and on-screendisplays. 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ ] and [ √ ] to select ‘Language ‘. 3 Whil...
Page 16 - Dynamic Range; ‘Preferences’ / Audio Settings; Set Parental Level; ‘Preferences’ / Parental Controls
SETUP 25 24 Initial Setup Initial Setup 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setuppage. 2 Use [ œ / √ ] to select ‘Preferences ‘. 3 While ‘Preferences ‘ is selected, press [ † ] to select ‘Audio‘. 4 Press [ √ ]. The ‘Audio‘ subme...
Page 17 - While ‘Preferences; Auto Clock Set; Various ‘Preferences’ Settings
This feature enables you to search for Index marks or specific times on yourVHS tapes. 1 While ‘Preferences‘ is selected, press [ † ] to move to the second level. 2 Use [ … / † ] to select ‘VCR‘. 3 Press [ENTER] to display the submenu. 4 Select ‘Index+’, ‘Index–’ or ‘Go to Zero’. 5 If you select ‘In...
Page 18 - PLAYBACK; On-Screen Display Overview; System Information; Displaying DVD Information; Displaying icons on DVD/CDDA disc; Changing menu options in display menu
PLAYBACK 29 28 On-Screen Display Overview On-Screen Display Overview Initial Setup • Some options cannot be reset, including Parental Controls, Password, and Country Code.• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, ...
Page 19 - Stereo; Changing the TV Audio Channel; DVD Playback; If a Disc menu is displayed; • A Disc menu may be displayed when you load a DVD. Use the [
PLAYBACK 31 30 On-Screen Display Overview You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. • STEREO Audio Signal : Stereo ➝ Mono ➝ Stereo • MONO Audio Signal : Mono • BIL Audio Signal : BIL1...
Page 20 - ] buttons to scroll around the zoomed picture.; • The Zoom function may not work on some DVDs.; select the desired title number and press [ENTER] to confirm.; ••• DVD •••
PLAYBACK 33 32 DVD Playback Slow Motion Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or[SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed. Zoom The Zoom function allows you to magnify the video image and scroll around...
Page 21 - Before You Begin; Insert a prerecorded video cassette.; Playing a VHS Tape; Auto Tracking; Tracking Control; Notes on special playback features; Fast Forward/Backward; Begin recording or playing a tape.; Special Playback Features; VCR Playback
PLAYBACK 35 1 Press the [VCR] button to set the remote control to operate the VCR deck. 2 Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Before You Begin 1 Inser...
Page 22 - Audio CD/MP3 PLAYBACK; ] to select the folder icon on the MP3 CD menu then press; Select the thumbnail you want to display using [; JPEG / Kodak Picture CD PLAYBACK; Other Disc Playback; You can enjoy a slide show while listening to MP3 music files.; Playing MP3 Files During a Slide Show
1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menuappears on the TV screen after a few moments to load the disc. 2 Use [ …† ] to select a track or a file, then press [PLAY] or [ENTER]. During playback, the current track's elapsed playing time will appear onthe menu. Playback will s...
Page 23 - Recording from TV; Basic Recording; Follow the instructions below to record a TV program.; Turn on the DVD Recorder+VCR and load a recordable disc or tape.; Make sure your TV input is set to view the DVD Recorder+VCR.; Set the desired Recording mode by pressing [REC MODE] repeatedly.; the recording will not be saved.; Follow steps 1-4 under Recording from TV.; SUBTITLES; ] to select a file of subtitles you want by using it.; DivX PLAYBACK
PLAYBACK RECORDING 39 38 Recording from TV Basic Recording Basic Recording Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressin...
Page 24 - RECORDING; Insert the VHS videotape you wish to copy into the VCR deck.; Insert a DVD±R or DVD±RW disc.; During one touch copy you can search and resume copy.; Checking the Recording Time; Note; Press [ENTER] to select the desired Record Mode in ‘Copy to Tape’ menu:; Stop the Copy Process; One Touch Copy - DVD to VHS; If you want to start copy any point of disc
RECORDING 41 40 Basic Recording During one touch copy you can search or change REC SPEED and resume copy. 1 During One Touch Copy, press [PLAY/PAUSE] to enter COPY EDIT mode. 2 Search with [FF/REW] or [NEXT/PREV] button. 3 Press [VCR œœ DVD] and you can change REC SPEED. 4 Press [VCR œœ DVD] again t...
Page 25 - Insert recordable media such as DVD±R ,DVD±RW, recordable VHS tape.; ] – Changes the setting at the current cursor position.; Timer Recording using Manual Set Record Screen; Insert recordable media such as DVD±R ,DVD±RW.; Timer Recording using ShowView (VideoPlus) system; Timer Recording
RECORDING 43 42 The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD±R ,DVD±RW, recordable VHS tape. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. The ‘Timer Recording’ menu appears. If ...
Page 26 - Load a recordable disc or tape.; Recording from External Components; Recording from an External Input; Timer Recording Troubleshooting; DV appears on the front panel display and the TV screen.; Recording from a Digital Camcorder
RECORDING 45 44 You can record from an external component, such as a camcorder or VCR, connected to any of the DVDRecorder+VCR’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 11 and 14. 2 Use [ … † ] or [INPUT] to select t...
Page 27 - and Digital VHS video recorders are not compatible.; Disc Operation in DVD±RW disc; Disc Initialize
RECORDING EDITING 47 46 Disc Operation Disc Operation Recording from an External Input Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using asingle DV cable for input and output of audio, video, data and control signals.The i.LINK interface is also kn...
Page 28 - EDITING; Adapt; and the number of titles on the disc.; number of titles on the disc.
EDITING 49 48 Disc Operation Disc Operation Make Compatible (DVD±RW) 'Make Compatible' for a DVD±RW will automatically create a menuscreen for navigating the disc. This menu screen is accessible bypressing [MENU] or [TITLE]. 3 Press [ … / † ] to select ‘Make Compatible‘. 4 If you want to make the di...
Page 29 - Disc Edit; Label a Title; Title Menu; You can erase titles on DVD±RW discs only.; Protect
EDITING 51 50 Disc Edit Disc Edit Disc Edit You can manage the titles on your DVD±R/±RW discs using the Titlemenu. At first, go to Disc Edit mode. 1 Press [SETUP]. The Setup menu appears. 2 While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Editpage. Label a Title To change the name of a...
Page 30 - Troubleshooting; Symptom; Change Index Picture
EDITING REFERENCE 53 52 Disc Edit Troubleshooting Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. No power. No picture. No sound. Playback picture is poor. DVD Recorder+VCR doesnot start playback. Picture from external inputis distort...
Page 31 - Moisture Condensation; You cannot record the source.
REFERENCE 55 54 When the DVD Recorder+VCR is moved from a coldplace to a warm place. Under extremely humid conditions. Keep the DVD Recorder+VCR plugged into an ACpower outlet with the power on. This will helpprevent condensation. When condensation has occurred, wait a few hoursfor the DVD Recorder+...
Page 32 - Macrovision; Technical Specifications; Video recording format; Design and specifications are subject to change
56 Manufactured under license from Dolby Laboratories. ‘Dolby‘ and the double-D symbol are trademarks ofDolby Laboratories.DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc. Macrovision This product incorporates copyright protection technology that is protected by met...
