D-Link VERSION 4.10 - Manual

2 D-Link DIR-600 User Manual Section 1 - Product Overview Network Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n/g wireless clients • 10/100 Ethernet Web-based Coniguration Utility Requirements Computer with the following: • Windows ® , Macintosh, or Linux-based operating system ...

3 D-Link DIR-600 User Manual Section 1 - Product Overview • Faster Wireless Networking - The DIR-600 provides up to 150Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, an...

4 D-Link DIR-600 User Manual Section 1 - Product Overview Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Power Receptor Receptor for the supplied power adapter. Reset Pressing the Reset button restores the router to its original fact...

5 D-Link DIR-600 User Manual Section 1 - Product Overview Hardware Overview LEDs Power LED A solid light indicates a proper connection to the power supply. Local Network LEDs A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. ...

6 D-Link DIR-600 User Manual Section 2 - Installation Before you Begin This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. • Please conigure the route...

7 D-Link DIR-600 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thicknes...

9 D-Link DIR-600 User Manual Section 2 - Installation If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: • Disable UPnP ™ • Disable DHCP • Change the LAN IP address...

10 D-Link DIR-600 User Manual Section 2 - Installation 6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of ...

11 D-Link DIR-600 User Manual Section 3 - Coniguration Coniguration This section will show you how to conigure your new D-Link wireless router using the web-based coniguration utility. Web-based Coniguration Utility To access the Easy Setup Wizard or coniguration utility, open a web-browser such as ...

12 D-Link DIR-600 User Manual Section 3 - Coniguration Easy Setup Wizard Once logged into the web interface of the router, Easy Setup Wizard will appear and perform WAN auto detection for the type of Internet connection.

13 D-Link DIR-600 User Manual Section 3 - Coniguration According to the detection result, the wizard will indicate the type of Internet connection that you’re currently use. You can configure your wireless network. Click Conigure button in Wireless Settings. Select the type of Wireless security you ...

15 D-Link DIR-600 User Manual Section 3 - Coniguration If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct coniguration parameters. Select your Internet connection type using the “ My Internet...

18 D-Link DIR-600 User Manual Section 3 - Coniguration Enter the IP address assigned by your ISP. Enter the Subnet Mask assigned by your ISP. Enter the Gateway assigned by your ISP. The DNS server information will be supplied by your ISP (Internet Service Provider.) Maximum Transmission Unit - you m...

19 D-Link DIR-600 User Manual Section 3 - Coniguration Wireless Settings If you want to conigure the wireless settings on your router using the wizard, click Wireless Connection Setup Wizard and refer to page 51. If you want to manually conigure the wireless settings on your router click Manual Wire...

20 D-Link DIR-600 User Manual Section 3 - Coniguration Manual Wireless Network Setup Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Click Add New to create your own time schedule to enable the wireless functio...

22 D-Link DIR-600 User Manual Section 3 - Coniguration This section will allow you to change the local network settings of the router and to conigure the DHCP settings. Network Settings Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you ...

23 D-Link DIR-600 User Manual Section 3 - Coniguration Check this box to enable the DHCP server on your router. Uncheck to disable this function. Enter the starting and ending IP addresses for the DHCP server’s IP assignment. Note: If you statically (manually) assign IP addresses to your computers o...

24 D-Link DIR-600 User Manual Section 3 - Coniguration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHC...

25 D-Link DIR-600 User Manual Section 3 - Coniguration The DIR-600 can be conigured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DIR-600 irewall feature ilters ou...

27 D-Link DIR-600 User Manual Section 3 - Coniguration This will allow you to open a single port or a range of ports. Port Forwarding Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the ields. Enter the IP address of th...

28 D-Link DIR-600 User Manual Section 3 - Coniguration Trafic Control Use this section to conigure D-Link’s Smart Trafic Control. The Trafic Control improves your online gaming experience by ensuring that your game trafic is prioritized over other network trafic, such as FTP or Web. Select this func...

29 D-Link DIR-600 User Manual Section 3 - Coniguration Network Filters Select Turn MAC Filtering Off, allow MAC addresses listed below, or deny MAC addresses listed below from the drop-down menu. Enter the MAC address you would like to ilter. To ind the MAC address on a computer, please refer to the...

30 D-Link DIR-600 User Manual Section 3 - Coniguration Select Deny or Allow computers access to only these sites. Click to delete all entries in the list. Enter the keywords or URLs that you want to allow or deny. w xyz{|}~ ~€‚ƒ ~ Filter Below: Clear the list below: Website URL/ Domain: Website Fi...

31 D-Link DIR-600 User Manual Section 3 - Coniguration SPI (Stateful Packet Inspection, also known as dynamic packet iltering) helps to prevent cyber attacks by tracking more state per session. It validates that the trafic passing through the session conforms to the protocol. If an application has t...

32 D-Link DIR-600 User Manual Section 3 - Coniguration Set the transmit power of the antennas. Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2346. If in...

33 D-Link DIR-600 User Manual Section 3 - Coniguration UPnP Internet Ping Block Internet Port Speed Multicast Streams To use the Universal Plug and Play (UPnP ™ ) feature click on Enabled . UPNP provides compatibility with networking equipment, software and peripherals. Unchecking the box will not a...

34 D-Link DIR-600 User Manual Section 3 - Coniguration Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Remote management allows the DIR-600 to be configured from the Internet by a web browser. A username and password is still required to acc...

35 D-Link DIR-600 User Manual Section 3 - Coniguration Time Settings Select the Time Zone from the drop-down menu. To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Press this button to set the device’s time the same...

37 D-Link DIR-600 User Manual Section 3 - Coniguration Use this option to save the current router coniguration settings to a ile on the hard disk of the computer you are using. First, click the Save button. You will then see a ile dialog, where you can select a location and ile name for the settings...

38 D-Link DIR-600 User Manual Section 3 - Coniguration Displays the current firmware version and date. After you have downloaded the new irmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the irmware upgrade. This function allows the user to transfer the...

39 D-Link DIR-600 User Manual Section 3 - Coniguration Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Choose your DDNS provider from the drop down menu. Enter the Host Name that you registered with your DDNS service prov...

40 D-Link DIR-600 User Manual Section 3 - Coniguration The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping . The results of your ping attempts will be displayed here. Ú ÛÜÝ Þßàá â Ping Results: The System Che...

41 D-Link DIR-600 User Manual Section 3 - Coniguration This page displays the current information for the DIR-600. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displa...

42 D-Link DIR-600 User Manual Section 3 - Coniguration Log êëìí íî ï ð ñòó View Levels: Clear: Link to Log Settings: You can select the types of messages that you want to display from the log. Firewall & Security, System, and Router Status messages can be selected. There are three levels of mess...

43 D-Link DIR-600 User Manual Section 3 - Coniguration Stats The screen below displays the Trafic Statistics. Here you can view the amount of packets that pass through the DIR-600 on both the Internet and the LAN ports. The trafic counter will reset if the device is rebooted.

44 D-Link DIR-600 User Manual Section 3 - Coniguration Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a W...

46 D-Link DIR-600 User Manual Section 3 - Coniguration Support

47 D-Link DIR-600 User Manual Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-600 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK(Pre-Shared Key) • WPA (Wi...

48 D-Link DIR-600 User Manual Section 4 - Security Wireless Connection Setup Wizard To run the security wizard, browse to the Setup page and then click the Wireless Connection Setup Wizard button.

51 D-Link DIR-600 User Manual Section 4 - Security Conigure WPA-Personal (PSK) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encry...

52 D-Link DIR-600 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before coniguring your wireless adapter. If you are joining an existing network, y...

53 D-Link DIR-600 User Manual Section 5 - Connecting to a Wireless Network 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the N...

56 D-Link DIR-600 User Manual Section 5 - Connecting to a Wireless Network Conigure WPA-PSK It is recommended to enable WEP on your wireless router or access point before coniguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 2. Highli...

57 D-Link DIR-600 User Manual Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect . It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settin...

58 D-Link DIR-600 User Manual Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-600. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows ® XP. ...

61 D-Link DIR-600 User Manual Section 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that...

62 D-Link DIR-600 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link...

63 D-Link DIR-600 User Manual Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your hom...

64 D-Link DIR-600 User Manual Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both les...

65 D-Link DIR-600 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere not just at home or ofice. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract peopl...

66 D-Link DIR-600 User Manual Appendix A - Wireless Basics Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set ...

67 D-Link DIR-600 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow...

68 D-Link DIR-600 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista ® - Click on Start > Control Panel > Network and Inter...

69 D-Link DIR-600 User Manual Appendix C - Technical Speciications Technical Speciications Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x Security • 64/128-bit WEP • WPA-Personal • WPA2-Personal Wireless Signal Rates* • 150Mbps • 48Mbps • 54Mbps • 24M...