D-Link SHR-2XXX - Manual
D-Link SHR-2XXX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – trial domain at
- Page 3 – DDNS; PORT FORWARDING AND OTHER ROUTER CONFIGURATION:; and; ADVANCED TAB
- Page 4 – below and then click the; APPLY; ports as shown in the steps below.
- Page 7 – CONNECTING THE DVR TO THE ROUTER AND ASSIGNING THE IP ADDRESS; setup details as explained at the beginning of this document.; push the MENU button; located on the upper right side of the DVR
- Page 9 – s Network and; IP ADDRESS; the MENU button to exit the setup.
- Page 10 – Samsung; USING SMARTVIEWER REMOTE SOFTWARE TO CONNECT:; INTERNAL IP address of the DVR.; Follow the steps below to connect with the SMARTVIEWER software:; success, you can then try the domain name from a remote location.
- Page 11 – screen and continue to step 3 below.
- Page 14 – troubleshooting procedures
- Page 15 – SMARTVIEWER software before you can connect.
- Page 17 – back to the main screen.
- Page 20 – TROUBLESHOOTING YOUR DVR - INTERNAL AND REMOTE CONNECTIONS; ISP has recently blocked some ports required; To Check the TZO Dynamic DNS is working:; At the Dos Prompt type:
- Page 21 – Approximate round trip times in milli-seconds:
1
Using TZO.COM
™
Dynamic DNS and a D-Link
™
804-HV
router for Remote Viewing with your Samsung
™
SHR-
2XXX and SHR-4XXX Series DVR
This document explains how to best setup a Samsung
™
SHR series DVR using a Dynamic or
Static IP connection and TZO.COM
™
Dynamic DNS. This setup is based on a D-Link
™
4 port
wired router model 804-HV. In this document, you will learn how to:
·
Login and setup the D-Link
™
804-HV Router with the TZO Dynamic DNS service
·
Configure the D-Link
™
router to add services and open the ports needed for remote viewing and
administration of your Samsung
™
DVR (TCP Port 554-557 and UDP 8000-8159)
·
Configure the IP address, gateway and DNS of the DVR so it works with the D-Link
™
router.
·
Connect to your Samsung
™
DVR from any Windows based PC on the same network
·
Connect to your Samsung
™
DVR from any REMOTE PC over the Internet using Smartviewer
software
·
Troubleshooting your DVR if you are having trouble connecting
Please Note: The product names used in this document are for identification purposes only. All trademarks and registered
trademarks are the property of their respective owners.
BEFORE YOU BEGIN
SETUP THE ROUTER AND DVR ACCORDING TO THE MANUAL
-----------------------------------------------------------------------
Initial D-Link
™
router setup:
You should SETUP THE D-LINK
™
ROUTER for your Internet Connection according to the ISP and D-Link
™
Manual. Make sure you can browse the Internet and use the Internet normally before you continue.
* If you use PPPoE DSL, make sure you set the CONNECT MODE to ALWAYS-ON under the WAN Settings
during configuration of the D-Link
™
Router.
Initial DVR Recording and Camera setup:
You should now setup the DVR for your preferences using the Manual/Guide that came with your DVR.
You do not need to setup the IP address on the DVR at this point, we cover that below to ensure the IP
is in the desired format for this document. If the DVR is already setup, continue below for details on
setting the IP address properly on the DVR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Setting up the TZO Dynamic DNS ------------------------------------------------------------------------------------------ SIGNING UP AND ENABLING THE D-LINK ™ ROUTER WITH TZO DYNAMIC DNS: A) Make sure you are signed up with a trial account, or have paid for a TZO subscription (Standard or Premier ...
3 D) Once you are logged into the router, click the ADVANCED tab at the top. Under the ADVANCED section, select DDNS from the left hand menu (blue buttons). As shown in the screenshot below, enable the TZO Dynamic DNS service, and then input the Domain Name, TZO Key/Password and Email Address/Userna...
4 Step 3) In the list of Virtual Servers, we will add ports 554-557 first, then ports 8000-8159 in a second process. In order to add a new service for ports 554-557, fill in the blanks as shown in the screenshot below and then click the APPLY button. Select Enabled Name: DVR Private IP: 200 Protocol...
