Page 3 - Table of Contents; Section 4: Sound System Setup; Perimeter Lighting; Section 7: Troubleshooting
Table of Contents Section 3: InstallingHard Drive & Testing Installing the Hard Drive .................... 27 Testing the Unit ................................... 30 Touch Screen ................................. 30Bill Acceptor ................................... 30Audio Test .....................
Page 4 - IMPORTANT SAFETY INSTRUCTIONS
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.I n s t a l l i n a c c o r d a n c e w ...
Page 5 - CAUTION; RISK OF ELECTRIC SHOCK; NO USER SERVICEABLE PARTS ARE INSIDE THIS JUKEBOX.; To reduce the risk of fire or
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. The lightning flash with arrowhead symbol,within an equilateral triangle is intended toalert the user to the presence of uninsulated“dangerous voltage” within the product’s en-closure that may be of sufficient magnitudeto constitute a risk of electric shock to...
Page 6 - INTRODUCTION; Section 1: Unpacking & System Description
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INTRODUCTION The MoD BoX jukebox is part of a much larger system – the AMI Entertainment ® network. This network is a digital platform that delivers music across the Internet to Jukeboxes anywhere. The MoD BoX jukebox is an Internet-enabled jukebox that allows...
Page 7 - MOD BOX JUKEBOX FEATURES; The major MoD BoX features are:
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. MOD BOX JUKEBOX FEATURES The major MoD BoX features are: General Features: • Sturdy construction and reliable design • Conveniently located customer, operator, and service controls • All major components are modular and easy to replace, if needed • Computer-co...
Page 8 - UNPACKING INSTRUCTIONS; Exterior; Remove the plastic bag that covers the jukebox.; Doors; VISUAL INSPECTION
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. UNPACKING INSTRUCTIONS This section contains information for unpacking the jukebox and installing it at a location.Save all tie-down hardware in case the MoD BoX must be moved to another location. Exterior 1. Remove the shipping carton with care: Do not use sh...
Page 9 - INSTALLING THE HANGER BRACKET
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. CAUTION MoD BoX must be solidly fastened to structural mem-bers within the supporting wall.MoD BoX weighs 130 pounds (50 kg); if it falls, it couldcause damage or injury. INSTALLATION INSTRUCTIONS INSTALLING THE HANGER BRACKET NOTE: It is recommended that all ...
Page 10 - FIGURE 1-1 - INSTALLING THE HANGER BRACKET
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. FIGURE 1-1 - INSTALLING THE HANGER BRACKET 7 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03 16" STUDS 17" FLOOR 64-3/8" HANGER BRACKET OPTIONAL ANCHOR HOLE TO LOCK MOD BOX TO BRACKET
Page 11 - FIGURE 1-2 - WITNESS LINE MOLDED INTO THE RIGHT UPPER SIDE OF THE; HANGING THE MOD BOX ON A BRACKET; Before installing the MoD BoX on the bracket, make sure that:
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. FIGURE 1-2 - WITNESS LINE MOLDED INTO THE RIGHT UPPER SIDE OF THE CABINET (ONE ON EACH SIDE) FIGURE 1-3 - MOD BOX LOWERED ON STUDS 3. Push the MoD BoX against wall and lower it onto the studs (see Figure 1-3). PM0599-03 MOD BOX INSTALLATION & OWNER’S MANUA...
Page 12 - FIGURE 1-4 - LOCKING THE MOD BOX TO THE BRACKET; Verify that the back panel is properly seated on the studs.
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. FIGURE 1-4 - LOCKING THE MOD BOX TO THE BRACKET 9 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03 4. Verify that the back panel is properly seated on the studs. 5. Lock the MoD BoX onto the bracket with the provided 10-32 machine screw (see Figure 1-4). SC...
Page 13 - MAJOR COMPONENTS OF THE MOD BOX
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. MAJOR COMPONENTS OF THE MOD BOX Figures 1-5 and 1-6 show the major components of the MoD BoX Jukebox. Take aminute to familiarize yourself with these components. Core Computer The Core Computer is the heart of the system and has a removable hard drive and a si...
Page 17 - MOD BOX SPECIFICATIONS; GENERAL; Core Computer; FUSES AND CIRCUIT BREAKERS; System Power Supply; LIGHTING
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. MOD BOX SPECIFICATIONS GENERAL Depth .............................................................................................................................. 13 in.Width .......................................................................................
Page 18 - POWER SYSTEM
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. POWER SYSTEM Because of the way the MoD BoX operates, the Power Switch shown and described inSection 1 does not disconnect all power. Turning this switch OFF gives every outwardappearance that the jukebox is off, but the amplifier system is left energized so t...
Page 19 - In order to bring the AMI Entertainment
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INTRODUCTION In order to bring the AMI Entertainment ® Network and the Internet to each location, a broadband connection or standard, modem dial-up connec-tion must be installed at each site. Depending on the situation andavailability, the line can be digital ...
Page 20 - Internet Wiring; Where to Install the Designated Line and Router; Router; DO NOT
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Internet Wiring The Internet line can be installed in any ofthe following: · An indoor telephone closet (preferablyon the same floor as the Jukebox) · An indoor utility closet (preferably on thesame floor as the Jukebox) · Closet or office where other soundequ...
Page 22 - The Router; Introduction; Power Light; - A solid light indicates a proper connection to the power supply.; WAN Light; Modem. This LED blinks during periods of data transmission.; WAN Port; - Connect the included power adapter ’s output here.; Hardware Reset; - This button is used to restore the DI-604 to its factory default set-
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. The Router Introduction The D-Link Router supplied with your jukebox provides two functions. It is the connectingpoint for the network in the location, and it distributes the Internet from the Modem to thejukebox and other devices. The connections between the ...
Page 23 - Ethernet Cable Pin Out and Instructions; To install the cable you will need:
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Ethernet Cable Pin Out and Instructions Part of the jukebox installation process requires making a custom Ethernet cable, as thecable length will be unique for each location. This cable will be run between the jukebox androuter. This customization will save co...
Page 24 - Installing the Router; Description; Select a Location
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Installing the Router Description After the broadband installer has completed the installation and testing process, you will beready to connect the router. If you choose to leave the router in the jukebox, simply route an Ethernet cable from the modemor other ...
Page 25 - Programming the Router; Router Setup
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Programming the Router Introduction The broadband installer should have left a document describing specific information requiredto connect to the Internet Service Provider (ISP). This document may have included a UserName and Password and/or several IP address...
Page 26 - Procedure; FIGURE 2-6 - DYNAMIC IP ADDRESS EXAMPLE SCREEN
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Procedure Generally, all router setup can be done from just one router setup screen. Touch the WANbutton on the left side of the router Home setup screen to display the WAN Settings page. Chances are your configuration will be one of the three primary router s...
Page 29 - Static IP; Apply; button and you are ready to go!
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Static IP Look on your broadband provider paperwork or call them to find out what the “IP Address”and “Subnet Mask” is. They may also require you to enter other numbers as shown on thisconfiguration screen. After you have this information, go to the Router Set...
Page 30 - INSTALLING THE HARD DRIVE; Deluxe model only; Section 3: Installing Hard Drive and Testing
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INSTALLING THE HARD DRIVE The following steps describe how to install a hard drive in the jukebox. 1. Unlock the jukebox and open the front door. Unplug the line cord at the wall or atthe power supply as described above. 2. Deluxe model only : Remove the 4 scr...
Page 33 - TESTING THE UNIT; Peripherals; TOUCH SCREEN; CONTROLLER - CALIBRATE LOCATION; BILL ACCEPTOR; Calibrate
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. NOTE: Every time a new hard drive is installed, the touch screen shouldbe calibrated. TESTING THE UNIT Once the jukebox is powered on and the user interface is running (see Figure 3-7), try thefollowing procedures before moving and installing the unit at the v...
Page 34 - “MoD BoX User Manual”; Connection Rules
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. AUDIO TEST Connect a pair of speakers as described in Section 4. Play a local music selection by following the procedure below. Browse through album covers on the local jukebox by touching the red arrow keys on eitherside of the panel showing the album covers....
Page 35 - Extension Speaker Operation; All speakers must be connected with the correct polarity.; Low Impedance Speakers; SOUND SYSTEM SETUP; Acoustical Compensation (Equalizer Tone Controls)
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INTRODUCTION See Section 2 if you have any questions about setting up the Network, or consult theincluded “MoD BoX User Manual” for questions about jukebox operation. Extension Speaker Operation To avoid a poor-sounding jukebox, care must be taken when adding ...
Page 36 - IMPORTANT; Equalizer Settings
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. IMPORTANT Each of these controls can limit the maximum volume for its range by asmuch as 75%. This means that if a control is set to minimum, that themaximum power available for that range is only about 32 watts. If all ofthe graphic equalizer controls are set...
Page 37 - Procedures for Adjustment
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. NOTE: The maximum volume setting is obtained when all controls are turnedfull counterclockwise. Refer to Figure 4-1 for a view of the preampli-fier. Procedures for Adjustment Select one of the Room Acoustics that most closely matches the acoustics of your room...
Page 38 - Hard or Non-Absorbent Rooms; Turn the 15.8 kHz control all the way clockwise.; Soft and Highly Absorbent Rooms; These are the factory settings.
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Hard or Non-Absorbent Rooms Rooms that are paneled and have bare or tiled floors are considered to be “hard or nonabsor-bent.” 1. Turn all seven right channel and seven left channel graphic equalizer controls fullycounterclockwise. 2. Turn the 15.8 kHz control...
Page 39 - PAGING; SPEAKER SYNOPSIS; 50 Watts of RMS Power per Amplifier or 125 Watts per Channel; The maximum load per channel is 125 watts.
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. PAGING Paging kits (part numbers KOV-106-000-06, -09, or -10) are available to provide this func-tion. They include a handheld microphone, an interface assembly and certain kits include 50ft. of cable which connects at J15 of the preamplifier. The interface in...
Page 42 - DUAL VOLUME CONTROL 4-WIRE; SINGLE VOLUME CONTROL 3-WIRE
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. 39 MOD BOX INSTALLATION & OWNER’S MANUAL PM0599-03 TERMINAL BLOCK FOR PRIMARY AMPLIFIER(PART OF CONTROL PANEL) SHORTING LINK W /V C H 1 V O LU M E W C H 2 V O LU M E C O M M O N C A N C E L V B O B R G W W B R G Dual Remote Volume and Cancel Control DUAL V...
Page 43 - Section 5: Perimeter Lighting Controller; #3. FLASHES ON AND OFF AT FULL BRIGHTNESS
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Section 5: Perimeter Lighting Controller PM0599-03 MOD BOX INSTALLATION & OWNER’S MANUAL 40 If your MoD BoX includes the optional perimeter lighting on the door, there are operationaladjustments and pattern options that can be used. This section describes ...
Page 45 - Section 6: Routine Service
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INTRODUCTION Routine and preventative maintenance is to be performed on your normal periodic service call. This section discusses how to collect money, perform the cash audit, and do preventive maintenance procedures. Setup features such as Background Music, F...
Page 46 - PREVENTIVE MAINTENANCE; CAUTION: DO NOT SPRAY CLEANER ON THE; Touch Screen Calibration
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. PREVENTIVE MAINTENANCE Preventive maintenance should be performed at regular intervals. At every visit, the exteriorshould be cleaned and the touch screen should be re-calibrated. Every 3-4 months, the interiorshould be cleaned. Exterior Part Procedure Touch S...
Page 47 - Section 7: Troubleshooting
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. INTRODUCTION The MoD BoX Jukebox incorporates several modules which plug in for rapidservice. The most likely cause of jukebox problems are: 1. Continuous or intermittent opens in a harness. The cause can bewiring, a terminal, or a bad terminal crimp. • Check ...
Page 48 - MOD BOX LED’S; POWER SUPPLY BOARD; Should be on. On when +9 VDC is available at the Power Supply.; COMMUNICATION CONTROLLER
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. MOD BOX LED’S POWER SUPPLY BOARD +9 V LED Should be on. On when +9 VDC is available at the Power Supply. +12 V LED Should be on. On when +12 VDC is available at the Power Supply. +24 V LED Should be on. On when +24 VDC is available at the Power Supply. VALID I...
Page 49 - COMPUTER CORE ASSEMBLY; HDD LED
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. COMPUTER CORE ASSEMBLY +5 V LED (GREEN) This should be lit whenever the jukebox is connected to 120 VAC service. HDD LED (RED) This LED should be lit only when the hard drive is being accessed by thecomputer. FIGURE 7-1 - HDD AND +5 VOLT LEDS PM0599-03 MOD BOX...
Page 50 - SEQUENCE OF OPERATION; “Credit”
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. SEQUENCE OF OPERATION Step 1: Power on the jukebox • With the System Power Supply power switch in the ON position, plug the AC power from the back of the jukebox into a standard, grounded wall outlet. • If the CC does not automatically start to boot-up, press ...
Page 51 - FIGURE 7-2 - COMMUNICATION CONTROLLER WIRING DIAGRAM; CONNECTION DIAGRAMS
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. FIGURE 7-2 - COMMUNICATION CONTROLLER WIRING DIAGRAM COMMUNICATION CONTROLLER CONTROLLER LED'S REJECT S5 SERVICE S2 POWER S1 COLLEC T S4 REJEC T S3 CALIBRATE DISCRETE R L A 2 CONNECTOR MALE 120 VAC CONNECTOR FEMALE 120 VAC TERMINAL BLOCK FROM OUTLET SUPPLY F R...
Page 55 - TROUBLESHOOTING CHARTS; Start with finding the “; Trouble; ” column that relates the closest to the problem you are; Symptom; ”. There can be many “; Probable
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. TROUBLESHOOTING CHARTS The best way to isolate a problem is to determine its cause. The following charts should helpto narrow down which module is failing and whether it can be fixed or needs to be replaced. Start with finding the “ Trouble ” column that relat...
Page 56 - TROUBLESHOOTING; continued
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. P ROBLEM S YMPTOM P ROBABLE C AUSE The touch screen does not work. • The application boots up, but the touch screen does not respond to touch. 1. The serial cable is not seated completely at the monitor or at the CC box. 2. The touch screen is dead. Nothing ha...
Page 58 - Merit Product Support and Services; AMI Entertainment; Outside the USA and Canada call:
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. For additional assistance, after contacting your distributor, contact: Merit Product Support and Services USA and Canada call toll-free: 1-800-445-9353 Outside the USA and Canada call: (215) 639-4700 FAX: (215) 639-5346 Merit Industries, Inc. P.O. Box 5004, Be...
Page 59 - Merit Limited Warranty; (b) Failed PCBs are accumulated for a time
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Merit Limited Warranty Merit Industries, Inc. warrants its machinesto be free from defects in material and work-manship for a period of one year from thedate of purchase. The warranty covers allelectrical components (except fuses and lightbulbs) and printed ci...
Page 60 - Merit Industries, Inc. Software License Agreement; Licensor ’s Obligations Under Warranty
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Merit Industries, Inc. Software License Agreement Merit Industries, Inc. (“Licensor”) is willing to license the enclosed software to you only ifyou accept all of the terms in this license agreement (“Agreement”). Ownership of the Software1. The enclosed Merit®...
Page 61 - IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Grant Of License10. Licensor grants to you a limited, non-exclusive license to distribute and/or use one copy of the Software on a single Merit (“Machine”) accompanied by a single licensorfactory authorized security key. Licensor reserves the right to update v...
Page 62 - Contrat de licence de logiciel de Merit Industries, Inc.
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Contrat de licence de logiciel de Merit Industries, Inc. Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence d'utilisation dulogiciel ci-inclus, à condition que vous vous engagiez à respecter tous les termes, clauses...
Page 63 - LE CONCEDANT NE SERA EN AUCUN CAS RESPONSIBLE : D'UNE RUPTURE DE
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Concession de Licence10. Le Concédant vous accorde le droit d'utiliser une seule copie par appareil Merit (ci-après "Appareil") accompagné d'une seule clé de sécurité autorisée en usine et fournie par leConcédant. Le Concédant se réserve le droit de mi...
Page 64 - Merit Industries, Inc. Softwarelizenzabkommen
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Merit Industries, Inc. Softwarelizenzabkommen Merit Industries, Inc. („Lizenzgeber”) ist nur dann bereit Ihnen eine Lizenz für die beiliegendeSoftware zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens (“Abkommen”)akzeptieren.Eigentumsvorbehalt der...
Page 65 - und Pflichten an Dritte abtreten.
COPYRIGHT © 2006 MERIT INDUSTRIES, INC. Übertragung der Lizenz10. Der Lizenzgeber gewährt Ihnen eine beschränkte, nicht-ausschliessbare Lizenz zur Vertreibung und/oder Benutzung einer Kopie der Software auf einem einzelnen Merit™ („Gerät”) mit einemeinzelnen werksmäßig gestatteten Sicherungsschlüsse...
Page 68 - MOD BOX INSTALLATION & OWNER’S MANUAL
Please read the enclosed license agreement. Operation of this game constitutes acceptance of the Merit Software License Agreement. Veuillez lire le contrat de licence d’utilisation ci-inclus. Si vous utilisez ce jeu, vous vous engagez à respecter les termes et conditions du contrat de licence d’util...
