D-Link office firewall - Manual
D-Link office firewall – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Connecting the DFL-300; continued...; Setting Up the Computer; Network
- Page 3 – Click Properties
- Page 4 – Configuring the DFL-300
- Page 5 – If your ISP requires you to enter a username/password for a PPPoE; Ok
- Page 6 – If your ISP assigns you a dynamic IP address, choose; Dynamic IP Address; Fill in the Hostname if provided by your ISP.; at the bottom when done.
- Page 7 – If your ISP assigns you a static IP address, choose; Static IP Address; Fill in the static IP information provided by your ISP. Click; at the; Policy; on the left; Outgoing
- Page 8 – New Entry
- Page 9 – Appendix
- Page 10 – VPN; menu. You should now be under; Please fill in the appropriate information for Site A.; Remote Gateway – Fixed; Preshare; OK
- Page 11 – Internal; Remote Gateway – Fixed IP:; There should now be a VPN; Connect; at both Sites to enable the VPN policy. The two remote locations; Connected
- Page 12 – Technical Support; Technical Support through our web site, by e-mail or by phone.; D-Link Technical Support over Telephone
Review Package Contents
Make sure that the package contains the following items. If
any items are missing, contact the reseller.
§
DFL-300 Firewall
§
Manual
§
Quick Install Guide
§
AC Power Adapter
Connecting the DFL-300
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Connecting the DFL-300 continued… To setup the DFL-300, begin by connecting the AC adapter to a power source. The Power LED on the front of the DFL-300 should now be on. Connect one end of the Ethernet cable to the Internal/LAN port of the DFL-300 and the other end of the cable into a hub or switch ...
Setting Up the Computer continued… Highlight the TCP/IP setting for the installed Ethernet Network Adapter. Click Properties At this screen, select the IP address tab. Select Obtain an IP Address Automatically. Click OK If you are prompted to restart your computer, please do so. When the computer re...
Configuring the DFL-300 Note: The DFL-300 requires Internet Explorer 4.0 or higher, or Netscape Communicato r 4.0 or higher. Please open your Web Browser and enter this URL: http://192.168.1.1 This will launch the DFL-300’s integrated web-based management system. This Enter Network Password pop-up s...
