D-Link N 150 - Manual

Manual Setup

Quick Install Guide

Package Contents

If any of the above items are missing, please contact your reseller.

1

2

Position your router close to your modem and a computer.

Place the router in an open area of your intended work area

for better wireless coverage.

3

4

Plug one end of the included blue Ethernet cable that came with your

router into the yellow port labeled

INTERNET

on the back of the router.

Plug the other end of this cable into the Ethernet port on your modem.

DIR-600L

LEDs (from top to bottom)

Turn off and unplug your cable or DSL

broadband modem.

Start Here

Modem

Router

Computer

Router

Modem

5

Reconnect the power adapter to your

cable or DSL broadband modem and wait

for two minutes.

6

Router

Modem

Computer

Computer

From the computer you connected the router to, open a web

browser and enter

http://192.168.0.1

or

http://dlinkrouter.

Press

Enter

and you will be directed to the D-Link Setup

Wizard page, which will detect your Internet connection type.

Follow the on-screen instructions to configure your Internet

settings. After setting up your router, you will be given the

option to create a mydlink account. Go to

www. mydlink.com

and enter your acount information.

This is a sample network configuration of the setup after you have

completed all the setup steps.

Note: Please refer to the user manual for more detailed installation

information and advanced features.

7

8

Router

Computer

Modem

Important for Manual Setup:

For the quick setup wizard to work properly, you

must have a working Internet connection. Ensure that you are able to use your
computer to get on the Internet before disconnecting your computer from your
modem.

Tips for PPPoE and USB connections:

If you have DSL and are connecting via PPPoE, make sure that you disable or uninstall any PPPoE

software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to

connect to the Internet.
You can only use the Ethernet port on your modem. If you were using USB to connect before, then you

must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet

port on the router, then turn the modem back on. In some cases, you may need to call your ISP to

change connection types (USB to Ethernet).

mydlink Setup
After creating a mydlink account, go to www.mydlink.com to configure and manage your devices.

To configure your router, go to the Manual Setup Section below and follow

the steps.

Modem

©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of

D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks

are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n

specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network

traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental

conditions will adversely affect wireless signal range. Product specifications, size and shape are subject to change without

notice, and actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada)

for more details. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.

Version 1.0 (May 3, 2012)

If you experience issues registering this Router with your mydlink account, try

performing a hard reset by using an unfolded paperclip to press and hold the reset

button for 10 seconds while the Router is powered on. This may be necessary if

you have purchased an open box or resold unit.

U.S. and Canadian customers can contact D-Link technical support through our web site or by

phone. You can find software updates and user documentation on the D-Link website as well

as frequently asked questions and answers to technical issues.

Before you contact technical support, please have the following ready:

• Model number of the product (e.g. DIR-600L)
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the product).

United States

Internet: http://support.dlink.com

Canada

Internet: http://support.dlink.ca

Technical Support

Note:

Please go to

http://www.dlink.com/support/

to download the user manual.

Wireless N 150 Home

Cloud Router

Power LED

- A solid light indicates a proper connection

to the power supply.

Internet LED

- A solid light indicates connection on the

Internet port. This LED blinks during data transmission.

WAN LEDs

- A solid light indicates that the wireless

segment is ready. This LED blinks during wireless data

transmission.

LAN LEDs (1-4)

A solid light indicates a connection

to an Ethernet-enabled device on ports 1-4. This LED

blinks during data transmission.

WPS LED/Button

- Located on the side of the router.

Press to initiate the WPS process. The LED will blink

during the WPS configuration process.

5V

RESET

1A

INTERNET

1

2

LAN

3

4

Router

Modem

If you are currently using a router, disconnect all the

cables connected to it before installing the DIR-605L.

Unplug the Ethernet cable from your modem that is

connected to your computer. Plug it into the LAN port

labeled 1 on the back of your router. The router is now

connected to your computer.

5V

RESET

1A

INTERNET

1

2

LAN

3

4

5V

RESET

1A

INTERNET

1

2

LAN

3

4

5V

RESET

1A

INTERNET

1

2

LAN

3

4

Plug the power back into the modem and power it on.

Then connect the supplied power adapter into the power

receptor on the back of the router and then plug into a

power outlet or surge protector. Verify the power light is lit.

5V

RESET

1A

INTERNET

1

2

LAN

3

4

DIR-600L Wireless N 150 Home

Cloud Router

Power Adapter

Ethernet Cable