D-Link DWL-900AP - Manual
D-Link DWL-900AP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Power
- Page 3 – Using The Setup Wizard; and type; Enter; or; Return; for the; Click
- Page 4 – screen
- Page 5 – You
- Page 6 – You will be returned to the; Home
- Page 7 – Status; tabs
- Page 8 – Technical Support; provides free technical support for customers; D-Link Technical Support over the Telephone:; 4 hours a day, seven days a week; D-Link Technical Support over the Internet:
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a router for
configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is
192.168.0.50
with a Subnet Mask of
255.255.255.0
. You will need to assign your
computer a Static IP address within the same range as the DWL-900AP+’s IP address
for the purpose of configuration of the DWL-900AP+.
See the Manual on the CD-ROM
if you need assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
These are the items included with your DWL-900AP+ purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the
property of their respective holders. Software and specifications subject to change without
notice. DWL-900AP+.05292002
This product can be set up using any
current web browser, i.e., Internet
Explorer 5x, Netscape Navigator 4x.
DWL-900AP+
D-Link AirPlus™
Wireless Access Point
• DWL-900AP+ Wireless Access Point
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight Through) Cable
• 5V DC, 2A Power Adapter
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
When connecting the DWL-900AP+ Wireless Access Point to an Ethernet Adapter in a computer, use a Cross- Over Ethernet cable. Connecting The DWL-900AP+ Wireless Access Point To Your Network A. First, connect the power adapter to the receptor at the back panel of the DWL-900AP+ and then plug the other...
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. Type “admin” for the username and leave th...
Using The Setup Wizard (continued) Click Run Wizard Click Next You will see the following screens. Once you have logged in, the Home screen will appear.
