D-Link DWL-2700AP - Manual

5 5 Different Operation modes with WDS (Wireless Distribution System) -Capable of operating in one of five different operation modes to meet yourwireless networking requirements: access point (AP), Point-to-Point (PtP)bridge, Point-to-multipoint (PtMP) bridge, wireless client, or repeater. Better se...

7 Using the Configuration Utility To configure the DWL-2700AP, use a computer which is connected to the DWL-2700APwith an Ethernet cable (see the Network Layout diagram). http://192.168.0.50 First, disable the Access the Internet using a proxy server function. To disablethis function, go to Control ...

8 Note: If you have changed the default IP address assigned to the DWL-2700AP,make sure to enter the correct IP address. Home > Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide formore information regarding the Setup Wizard. After the connection is establ...

12 Using the Configuration Utility (continued) Advanced > Performance TransmitPower- Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power. Channel- Select from channels 1-11.(FCC 1-11; ETSI 1-13). DTIM- (Delivery Traffic Indication Message) - 1 is the default setting. DTIMis a c...

13 Using the Configuration Utility (continued) Advanced > Filters > Wireless Access Settings Click Apply to save the changes. Access Control- Select Disabled to disable the filters function.Select Accept to accept only those devices with MAC addressesin the Access Control List.Select Reject to...

15 Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select Open System/Shared Key to communicate the key and require identical WEP settings to communicate. Select 802.1X for increased securi...

17 Using the Configuration Utility (continued) Advanced > DHCP Server > Dynamic Pool Settings DHCP ServerControl- Dynamic PoolSettings- Enable or Disablethe DHCP functionhere. Enter the starting IPa d d r e s s i n t h erange. IP Assigned From- Enter the number(quantity) of IP ad-d r e s s e s...

18 Using the Configuration Utility (continued) Advanced > DHCP Server > Static Pool Settings DHCP ServerControl- Static PoolSettings- Enable or Disablethe DHCP functionhere. Enter the static IPaddress of the de-vice here. Assigned IP- Enter the MAC ad-dress of the devicehere. Assigned MACAddre...

19 Using the Configuration Menu (continued) Advanced > DHCP Server > Current IP Mapping List Current DHCP Dynamic Pools- These are IP address pools to which the DHCP server function has assigned dynamic IP addresses. Binding MAC address- Assigned IP address- Lease Time- Current DHCP Static Poo...

26 Help At this window you can access the help screens for the topics listed. Using the Configuration Utility (continued)

27 Technical Specifications Standards• IEEE 802.11b• IEEE 802.11g• IEEE 802.3• IEEE 802.3u• IEEE 802.3x Device Management• Web-Based – Internet Explorer v6 or later; Netscape Navigator v6 or later; or otherJava-enabled browsers.• Telnet• AP Manager• SNMP v.3 Data Rate*For 802.11b:• 11, 5.5, 2, and 1...

31 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limitedwarranty for its product only to the person or entity that originally purchased the product from: • D-Link or its authorized reseller or distributor and • Products purchased and delivered wi...

34 Registration 12/13/04 Product registration is entirely voluntary and failure to complete or return thisform will not diminish your warranty rights.