Page 2 - ii; Contents
ii Contents Package Contents ........................................................................................................... 1 Introduction ..................................................................................................................... 1 Connections ...................
Page 3 - iii
iii Help............................................................................................................................ 26 Technical Specifications .............................................................................................. 27 Frequently Asked Questions .................
Page 4 - Package Contents; Manual and Warranty on CD; Introduction
1 Package Contents • D-Link DVG-2001S VoIP Terminal Adapter • Power Adapter - DC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet Cable (the DVG-2001S’s Ethernet port is Auto-MDIX) If any of the above items are missing, please contact your reseller. Note: Using a power sup...
Page 5 - Connections; Phone Connection; Auto MDI/MDIX LAN Port
Connections 2 The Ethernet Port (LAN) is auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Phone Connection Power Adapter Connect your 12V 1.2A power adapter here. Connect to your phone using standard phone cabling. Factory Reset button Auto MDI/MDIX LAN Por...
Page 6 - LEDs; Phone LED
LEDs 3 This LED will light when a telephone is off the hook. A blinking LED indicates an incoming call is detected Phone LED LAN LED An active LED indicates a link has been established. A blinking LED indicates activity on the LAN port. Power LED A solid light indicates a valid connection to the pow...
Page 7 - Features
4 Features One Foreign Exchange Subscriber (FXS) POTS port (RJ-11 Jack) One NWay 10/100BASE-TX Fast Ethernet port for network connection Voice Activity Detection (VAD)/Comfort Noise Generation (CNG) Silence suppression to reduce bandwidth consumption Adaptive jitter buffer for smooth voice...
Page 8 - Using the Configuration Wizard; Using the Configuration Menu (contin
Using the Configuration Wizard 5 Using the Configuration Menu (contin 10.1.1.1 Whenever you want to configure your network or the DVG-2001S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DVG-2001S. The DVG-2001S default IP Address is shown to th...
Page 9 - Dynamic IP Address; Host Name
Home > WAN > Dynamic IP Address Dynamic IP Address Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option should be selected if your ISP has not supplied you with an IP address. This option is commonly used for Cable modem services. Host Name The Ho...
Page 10 - Static IP Address
Primary/Secondary DNS Address Enter a DNS Address if you wish not to use the address provided by your ISP. Home > WAN > Static IP Address Static IP Address Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, ...
Page 11 - IP Address; Subnet Mask
IP Address Input the public IP Address provided by your ISP. Subnet Mask Input your Subnet mask. (All devices in the network must have the same subnet mask.) Default Gateway Input the public IP address of the ISP to which you are connecting. Primary DNS Address Input the primary DNS (Domain Name Ser...
Page 12 - Password; Retype Password
PPPoE Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) User Name Enter The PPPoE user name provided to you by your ISP. Password Enter The PPPoE password provided to you by your ISP. Retype Password Retype the password entered in the previous field. IP Address Thi...
Page 14 - Server FQDN; Domain Name; field as part of SIP URL; Service Domain
Advanced > VOIP > Server Configuration The VoIP Terminal Adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). The screen shown to the right, along with those on the following pages are used to configure your router to communicate with the devices...
Page 21 - Signaling ToS; RTP ToS; Receive Gain
Advanced > Misc. Signaling ToS Signaling ToS -ToS field value in UDP IP Packets carrying a SIP Message RTP ToS RTP ToS - ToS field value in UDP IP Packets carrying a RTP data Receive Gain Used to raise or lower the gain (volume) of signals that come in from the IP and are sent to the line-side or...
Page 22 - and; Confirm; to be certain you; Apply; button to activate
Tools > Admin Change System Password To change the password used to access the web manager, type the New Password and Confirm Password to be certain you have typed it correctly. Click the Apply button to activate the new password. The System User Name remains “admin”, this cannot be changed using...
Page 24 - to complete the firmware upgrade.
Tools > Firmware You can upgrade the firmware of the VoIP Terminal Adapter here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link Support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your har...
Page 25 - Backup; to initiate the; Upload; to initiate; Browse
Tools > Config This screen allows you to backup and restore configuration files. Click Backup to initiate the backing up of a configuration file. C lick Upload to initiate the uploading of the configuration file once you have located it by using the Browse button. Tools > Save & Reboot Thi...
Page 26 - Status > Device Info; WAN
Status > Device Info This page displays the current information for the DVG-2001S. WAN MAC Address : MAC address of the DVG-2001S IP Address : WAN/Public IP Address Subnet Mask : WAN/Public Subnet Mask Default Gateway : WAN/Public Gateway IP Address Status > Stats The VoIP Terminal Adapter kee...
Page 27 - Reset; button. To refresh current; Refresh
The screen above displays the Traffic Statistics. Here you can view the amount of packets that pass through the DVG-2001S on the WAN port. The traffic counter will reset if the device is rebooted or can be reset by clicking the Reset button. To refresh current statistics, click the Refresh button. 2...
Page 28 - Status > Cable Tester; test
Status > Cable Tester The VoIP Terminal Adapter offers you to conduct a Ping test by entering the IP address in the field below and then clicking the test button. . 25
Page 29 - The; Help
Help The Help tab will give basic information referring to various screens located in the VoIP Terminal Adapter. To view a specific section, click on its hyperlinked name. A new window of information will appear. 26
Page 30 - Technical Specifications
Technical Specifications Standards: IEEE 802.3 IEEE 802.3u Device Management: HTTP 1.0 Web-Based - Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java-enabled browsers DHCP Client Auto-provisioning Telnet TFTP Client Performance monitoring using DSP/Ethernet ...
Page 32 - Frequently Asked Questions; Why can ́t I access the web based configuration?; W h a t t y p e o f c a b l e s h o u l d I b e u s i n g ?; The following connections require a Crossover Cable:
Frequently Asked Questions Why can´t I access the web based configuration? When entering the IP Address of the DVG-2001S (10.1.1.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer m...
Page 35 - Configure your Internet settings.
Frequently Asked Questions (continued) 32 Why can´t I access the web based configuration? (continued) S t e p 2 Disable any Internet security software running on the computer. Software firewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the configuratio...
Page 36 - Freq uentl y Asked Que stions (con tinued ); Step 1
Freq uentl y Asked Que stions (con tinued ) 33 Why can´t I access the web based configuration? (continued) S t e p 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Most D-Link devices use either 10.0.0.1 or the 192.168.0....
Page 37 - Check your IP Address. Your computer must have an IP
34 Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) Step 4 After selecting your adapter, it will display your IP Address, subnet mask, and default gateway. Step 5 Click OK to close the IP Configuration window. S t e p 4 (continued) Check your IP Addr...
Page 38 - H o w c a n I f i n d m y I P A d d r e s s i n W i n d o w s 2 0 0 0 / X P ?
Frequently Asked Questions (continued) 35 Why can´t I access the web based configuration? (continued) H o w c a n I f i n d m y I P A d d r e s s i n W i n d o w s 2 0 0 0 / X P ? Step 1 Click on Start and select Run. Step 2 Type cmd then click OK. Step 3 From the Command Prompt, enter ipconfig. It ...
Page 39 - How can I assign a Static IP Address in Windows XP?
Freq uentl y Asked Que stions (con tinued ) 36 Why can´t I access the web based configuration? (continued) S t e p 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to configure. Your D-Link device uses 10.1.1.1. Make sure y...
Page 40 - The Secondary DNS is not needed or enter
37 How can I assign a Static IP Address in Windows 2000? (continued) Click “Use the following IP Address” and enter an IP Address that is on the same subnet as the LAN IP Address on your VoIP Terminal Adapter. Example: If the VoIP Terminal Adapter´s LAN IP Address is 10.1.1.1, make your IP Address 1...
Page 42 - Step 2
39 Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) How can I assign a Static IP Address in Windows 98/Me? (continued) Step 2 Click Specify an IP Address. Enter in an IP Address that is on the same subnet as the LAN IP Address on your VoIP Terminal A...
Page 43 - Access the web management. Open your web browser and enter the IP
Frequently Asked Questions (continued) Why can´t I access the web based configuration? (continued) S t e p 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions...
Page 44 - How can I setup my router to work with a Cable modem connection?; Static Cable Connection
Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection? S t e p 1 Power cycle the cable modem and router: Turn the cable modem off (first). Turn the router off Leave them off for 2 minutes.** Turn the cable modem on (first). Wait until you get a solid ...
Page 47 - Technical Support; Tech Support for customers within the United States:; Tech Support for customers within Canada:; D-Link Technical Support over the Telephone:
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link techni...
