Page 2 - Contents
Contents Package Contents ........................................................................................................... 3 Introduction ..................................................................................................................... 4 Rear Panel Connections............
Page 4 - Package Contents
3 Package Contents • D-Link DVG-1402S Router • Power Adapter - AC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet Cable (All the Ethernet ports on DVG-1402S are Auto-MDIX) Note: Using a power supply with a different voltage rating than the one included with the DVG-1402S ...
Page 5 - Introduction
4 Introduction The D-Link DVG-1402S High-Speed VoIP Router Links traditional telephony networks to IP networks with conventional telephony devices such as analog phones or fax machines. It can reduce long distance phone charges and deliver toll-quality voice communication over the IP network. This g...
Page 6 - Rear Panel Connections
5 Rear Panel Connections Phone Connections Connect to your phones using standard phone cabling. All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Auto MDI/MDIX LAN Ports Connect the Ethernet cable from computers on your L...
Page 7 - Front Panel LEDs; Power LED
6 Front Panel LEDs Power LED A solid light indicates a valid connection to the power supply. Status LED A blinking LED indicates the DVG-1402S is functioning properly. WAN LED An active LED indicates a link has been established. A blinking LED indicates activity on the WAN port. LAN LEDs An active L...
Page 8 - Features
7 Features • 1 NWay 10/100BASE-TX Fast Ethernet port for WAN-connection • 4 NWay 10/100BASE-TX Fast Ethernet port for LAN-connection • 2 Foreign Exchange Subscriber (FXS) POTS ports (RJ-11 Jacks) • Voice Activity Detection (VAD) /Comfort Noise Generation (CNG) • Silence suppression to reduce bandwid...
Page 9 - Installation
8 Installation For a typical setup at home, please do the following: 1. You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office) 2. Consult with your Cable or DSL provider for proper installation of the modem 3. Connect the Cable or DSL modem to the DVG-1402S...
Page 10 - Using the Configuration Wizard
9 Using the Configuration Wizard Whenever you want to configure your network or the DVG-1402S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DVG-1402S. The DVG-1402S default IP Address is shown to the right: • Open the web browser • Type in the ...
Page 20 - Domain Name
19 Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP URL domain name is different from the SIP proxy server domain name. The phone will then use the domain name in Domain Name field as part of SIP URL but se...
Page 26 - line 1; Inband
25 Home > VoIP > Telephony Index Use this field to assign line 1 or line 2 telephone sockets (on the back of the router) to the information entered in the User Agent. DTMF Method Out-of band Dual Tone Multi-frequency -The Dual Tone Multi-frequency (DTMF) mode sets how the router will handle th...
Page 34 - Starting IP Address; Ending IP Address; Apply; Enabled
33 Home > DHCP The next step is to set a range of IP addresses that you wish to allot to the devices on your LAN by entering a Starting IP Address and an Ending IP Address . This may be in a range from 2 to 254 (192.168.1.2 – 192.168.1.254). Computers on your LAN will have an IP address within th...
Page 35 - DHCP Client
34 as HTTP or FTP. First, the user must enable the Static DHCP function by clicking the corresponding Enabled radio button. Next the user must enter the host name and the IP address for that computer by entering the last numbers into the space provided in the IP Address field. Next, the user is to e...
Page 37 - Advanced > Virtual Server; Advanced; Virtual Server
36 Advanced > Virtual Server To view the following window, click on the Advanced tab at the top of the window and then click the Virtual Server button to the left. The Virtual Server will allow remote users access to various services outside of their LAN through a public IP address, such as FTP (...
Page 43 - Version
42 Advanced > Routing > RIP Configuration LAN RIPv1 Select RIPv1 or RIPv2 for use by the router on your LAN. LAN RIPv2 Select RIPv1 or RIPv2 for use by the router on your LAN. WAN RIPv1 Select RIPv1 or RIPv2 for use by the router on the WAN. WAN RIPv2 Select RIPv1 or RIPv2 for use by the route...
Page 44 - Enable; Disable
43 Advanced > Routing > Static Route IP Address Enter the IP Address of the subnet or device where packets are to be routed. Subnet Mask Enter the subnet mask corresponding to the IP address entered above . Gateway Enter the IP address of the gateway used for packets that are to be routed to t...
Page 48 - Administrator
47 Tools > Admin Web Port Number The port number used to access the Broadband Router. The default port number for web management is 80. WAN Access Control WAN access control allows remote management via the DI-624 to be configured from the Internet by a web browser. A username and password are st...
Page 49 - Backup; Open
48 Tools > System Backup Click Backup to backup the configuration file to your local hard drive. To restore the configuration file click on Browse to search the local hard drive and locate the configuration file to be used for the configuration restoration. Once the file has been located, click O...
Page 51 - Trap Manager IP; Trap Community Name; SNMP; Tools
50 Tools > SNMP Use SNMP to configure system features for proper operation, performance monitoring, and detection of potential problems in the Router or network. The SNMP IP Management Address is the address of the PC running the SNMP software from the DVG-1402S device. A defined set of variables...
Page 53 - Status > Device Info
52 Status > Device Info WAN IP Address : WAN/Public IP Address Subnet Mask : WAN/Public Subnet Mask Default Gateway : WAN/Public Gateway IP Address LAN LAN MAC Address : MAC address of the DVG-1402S IP Address : LAN/Private IP Address of the DVG-1402S Subnet Mask : LAN/Private Subnet Mask of the ...
Page 54 - Reset; Refresh
53 Status > Stats The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. The screen above displays the Traffic Statistics. Here you can view the amount...
Page 55 - Status > Diagnostics; Test
54 Status > Diagnostics The Diagnostics window allows users to test the functionality of the router by executing a ping test. Enter the IP address of the Ping Target and then click Test .
Page 56 - Help
55 Help The Help tab will give basic information referring to various screens locted in the Router. To view a specific section, click on its hyperlinked name. A new window of information will appear.
Page 57 - Technical Specifications
56 Technical Specifications Standards IEEE 802.3 IEEE 802.3u VPN Pass Through/ Multi-Sessions PPTP L2TP I PSec Device Management Web-Based- Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java-enabled browsers DHCP Server and Client Advanced Firewall Features ...
Page 59 - Technical Support; Tech Support for customers within the United States:; Tech Support for customers within Canada:
58 Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link tec...
