Page 3 - Wichtige Sicherheitshinweise; Limited Warranty
DSL-524T ADSL Router Manual iii Warranty and Registration for all Countries and Regions Except USA Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu tre...
Page 4 - Warranty and Registration Information for USA Only
DSL-524T ADSL Router Manual iv D-Link warrants each of its hardware products to be free from defects in workmanship and materials under normal use and service for a period commencing on the date of purchase from D-Link or its Authorized Reseller and extending for the length of time stipulated by the...
Page 7 - AVERTISSEMENT AUX UTILISATEURS; AVVERTIMENTI PER GLI UTILIZZATORI
DSL-524T ADSL Router Manual vii Italian Con la presente D-Link Corporation dichiara che questo Wireless LAN device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Spanish Por medio de la presente D-Link Corporation declara que el Wireless...
Page 8 - INSTALLAZIONE ED UTILIZZO DI SITEMI RADIO LAN AD USO PRIVATO
DSL-524T ADSL Router Manual viii Per questo motivo su tutto il territorio dell'Unione Europea, ed anche in Italia, è assolutamente vietato utilizzare antenne che abbiano un guadagno in trasmissione elevato (in linea di massima diciamo superiore ai 5 dBi), tale da portare la potenza trasmessa E.I.R.P...
Page 10 - TABLE OF CONTENTS
TABLE OF CONTENTS About This User’s Guide....................................................................................................................................12 Before You Start ..............................................................................................................
Page 12 - About This User’s Guide; Installation Requirements; Information you will need from your ADSL service provider:
DSL-524T ADSL Router Manual 12 About This User’s Guide This manual provides instructions on how to install the DSL-524T ADSL Router and use it to connect a computer or Ethernet LAN to the Internet. Before You Start Please read and make sure you understand all the prerequisites for proper installatio...
Page 13 - Information you will need about your DSL-524T ADSL Router:
DSL-524T ADSL Router Manual 13 Information you will need about your DSL-524T ADSL Router: Username This is the Username you will be prompted to enter when you access the DSL-524T’s configuration screens using a Web browser. The default Username is admin . Record your info here. Password This is the ...
Page 15 - Introduction; Router Description and Operation; Low Pass Filters
DSL-524T ADSL Router Manual 15 1 Introduction This section provides a brief description of the Router, its associated technologies and a list of Router features. What is ADSL? Asymmetric Digital Subscriber Line (ADSL) is an access technology that utilizes ordinary copper telephone lines to enable br...
Page 16 - Web Browser; ACCOUNT INFORMATION (PPP Connections Only); Router Features; The D-Link DSL-524T ADSL Router provides the following features:
DSL-524T ADSL Router Manual 16 Web Browser Any common web browser can be used to configure the Router using the web configuration management software. The program is designed to work best with more recently released browsers such as Mozilla, Firefox, Opera, Microsoft Internet Explorer® version 5.0, ...
Page 17 - Packing List; Front Panel; Power; Status
DSL-524T ADSL Router Manual 17 • Friendly web-based graphical user interface for configuration and management • Supports up to eight simultaneous virtual connections for a single ADSL account • Supports T1.413 issue 2, G.dmt and G.lite for the ADSL standard • Supports G.dmt.bis and G.lite.bis for th...
Page 18 - Rear Panel
DSL-524T ADSL Router Manual 18 Rear Panel Connect the AC power adapter cord and network cables on the rear panel. The power switch and reset button are also located on the back of the device. Connect the antennas to the antenna posts. All cable connections to the Router are made at the rear panel. T...
Page 19 - Hardware Installation; Location; Connect ADSL Line; Hub or Switch to Router Connection
DSL-524T ADSL Router Manual 19 2 Hardware Installation The DSL-524T functions on two separate networks, as an Ethernet LAN and as an ADSL WAN. When deciding where to put the Router, the user must take into account the fact that it is connected to these three networks with three types of media. Ether...
Page 20 - Computer to Router Connection; Power On Router; and plug the adapter into a suitable nearby power source.; Factory Reset Button
DSL-524T ADSL Router Manual 20 Computer to Router Connection Power On Router To power on the Router: 1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. 2. You should see the Power LED indicat...
Page 21 - Configuring the Router for the First Time; WAN Configuration Summary; Connect to the Router; To configure the WAN connection used by the Router it is first; Configure the WAN Connection; Once your are able to access the configuration software you; Configuring IP Settings on Your Computer
DSL-524T ADSL Router Manual 21 3 Configuring the Router for the First Time The first time you setup the Router it is recommended that you configure the WAN connection using a single computer making sure that both the computer and the Router are not connected to the LAN. Once the WAN connection is fu...
Page 22 - Configure IP Settings; Windows XP; Local Area Connection
DSL-524T ADSL Router Manual 22 Configure IP Settings You must now enable your computer to access the Router’s configuration software. To do this you will need to configure the IP settings on your computer. Follow these instructions to configure the IP settings for the operating system installed on y...
Page 23 - Windows Me
DSL-524T ADSL Router Manual 23 Windows Me 1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, right-click on the Network icon, then select Pr...
Page 24 - Specify an IP address; Accessing the Configuration Manager
DSL-524T ADSL Router Manual 24 3. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter. 4. In the TCP/IP Properties dialog box, click the IP Address tab. 5. Click the Specify an IP address option. 6. Type in IP settings as follows, IP address: 192.168...
Page 25 - followed by the default IP address,; Configure the Router with the Configuration Wizard; Home
DSL-524T ADSL Router Manual 25 To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router. Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The URL in the address bar should read: http://192....
Page 26 - Setup Wizard; button
DSL-524T ADSL Router Manual 26 Figure 3-2. Home – Setup When the Router is used to provide Internet access it actually must first access your service provider’s network, that is, it must communicate with computers and other modems owned by your service provider. These computers and modems then provi...
Page 27 - Figure 3-3. Opening Setup window
DSL-524T ADSL Router Manual 27 Figure 3-3. Opening Setup window Step 1: Choose Your Time Zone Figure 3-4. Choose Time Zone window The Setup window has four options listed, which will run through in the order given. Each step will be explained in detail. Click Next to access Step 1. You may click Bac...
Page 28 - Figure 3-5. Set Internet Connection Type window
DSL-524T ADSL Router Manual 28 Step 2: Setting the ADSL Connection Figure 3-5. Set Internet Connection Type window Step 2.1: Bridge Mode Figure 3-6. Set 1483 Bridged IP LLC Step 2 involves choosing the correct connection type mode for your modem. There are different methods or protocols used to make...
Page 30 - Next; button to go to Step 3 of
DSL-524T ADSL Router Manual 30 Step 2.2: Static IP Address Figure 3-7. Set RFC2684 Bridged Static IP window VPI/VCI If you are told to change the VPI or VCI values, type in the values given to you by your service provider. Many users will be able to use the default settings. IP Address Enter the IP ...
Page 32 - Figure 3-8. Set Dynamic IP Address
DSL-524T ADSL Router Manual 32 Step 2.3 Dynamic IP Address Figure 3-8. Set Dynamic IP Address Choosing the third option and clicking Next will lead you to the following window to configure the Router for. Users choosing this option should have software located on their computer or other networking d...
Page 34 - Connection Type; Choose between; PPPoE LLC; or
DSL-524T ADSL Router Manual 34 Step 2:4 PPPoE/PPPoA Figure 3-9. Set PPPoE window VPI/VCI If you are told to change the VPI or VCI values, type in the values given to you by your service provider. Many users will be able to use the default settings. Username & Password Type the Username and Passw...
Page 36 - tab include; WAN; and; DNS; WAN Configuration
DSL-524T ADSL Router Manual 36 4 Home This tab in the Web Manager will allow the user to set up various configurations in order to connect your Router to the Internet. Much of the information necessary in these screens must be supplied to you by your ISP. Remember to use the key words in bold when a...
Page 37 - ATM VC Setting; menu to enable the selected PVC.; WAN Settings
DSL-524T ADSL Router Manual 37 Figure 4- 1. Home – WAN window ATM VC Setting The first section of the WAN configuration pages offers fields to set general values for any Virtual Channel chosen for connection to your ISP. This section holds the following fields to configure. PVC: Leave this set at th...
Page 38 - Dynamic IP Address; Figure 4- 2. WAN Settings window for Dynamic IP Address
DSL-524T ADSL Router Manual 38 the window and new settings will appear for the user to configure. The proper selection should be given to you by your ISP. Dynamic IP Address Selecting this option in the WAN Settings will change your screen to look like the one seen below. Users choosing this option ...
Page 39 - Static IP Address; Figure 4- 3. WAN Settings window for Static IP Address; This window holds the following fields for the user to configure.; IP Address
DSL-524T ADSL Router Manual 39 Static IP Address Selecting this option in the WAN Settings will change your screen to look like the one seen below. A Static IP address is used whenever a known static IP is assigned. The accompanying information such as the Subnet mask, ISP Gateway Address and DNS se...
Page 40 - Click; Apply; to set the Static IP address for the DSL-524T.
DSL-524T ADSL Router Manual 40 Primary DNS Address This entry is for the IP address of your primary domain name server, which should also be provided to you by your ISP. The router will first try the Primary DNS Address to resolve a website’s URL IP address. If this IP address fails, the router will...
Page 42 - Bridge Mode
DSL-524T ADSL Router Manual 42 Connection Type Choose between PPPoE LLC, PPPoA LLC or PPPoE VC-Mux, depending on the instructions of your ISP. MTU The Maximum Transmission Unit ( MTU ) is a link layer restriction on the maximum number of bytes of data that can be sent in a single transmission. The d...
Page 43 - Figure 4- 5. WAN Settings window for Bridge Mode; to implement the Bridge Mode settings for the DSL-524T.; ATM; Figure 4- 6. ATM settings for the WAN interface; This field represents the; UBR
DSL-524T ADSL Router Manual 43 Figure 4- 5. WAN Settings window for Bridge Mode Click Apply to implement the Bridge Mode settings for the DSL-524T. ATM This section of the WAN window allows the user to adjust ATM Quality of Service (QoS) or traffic parameters to suit specific traffic requirements. F...
Page 44 - CBR; to let your changes take effect.
DSL-524T ADSL Router Manual 44 • CBR – Constant Bit Rate, usually used in circumstances where very low packet loss and very low Cell Delay Variable (CDV) are desirable. • VBR – Variable Bit Rate, usually used when network traffic is characterized by bursts of packets at variable intervals, and some ...
Page 45 - LAN Configuration; to implement changes made to this window.
DSL-524T ADSL Router Manual 45 LAN Configuration LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DSL-524T and may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address ...
Page 46 - DHCP
DSL-524T ADSL Router Manual 46 DHCP Dynamic Host Configuration Protocol (DHCP) allows the gateway to automatically obtain the IP address from a DHCP server on the service provider’s network. The service provider assigns a global IP address from a pool of addresses available to the service provider. ...
Page 47 - DHCP Server; radio button in the window above and enter the; Starting IP Address; Ending IP
DSL-524T ADSL Router Manual 47 Figure 4- 8. DHCP configuration window To setup DHCP for your LAN, first enable the Router as a DHCP server by clicking the corresponding DHCP Server radio button in the window above and enter the Starting IP Address and Ending IP address to create a pool of IP address...
Page 48 - Lease Time; settings for the LAN.; DNS Mode; to implement information set in this table.
DSL-524T ADSL Router Manual 48 the LAN. The Lease Time field is the time the Server will set for devices using DHCP to re-request an IP Address. When using the Router in DHCP mode you may also configure DNS settings for the LAN. Click the DNS Mode radio button to auto to allow the Router to automati...
Page 49 - Disable DNS; – This choice will enable the router to automatically; Use User Discovered DNS Server Only; – This choice will enable the DNS Servers entered in
DSL-524T ADSL Router Manual 49 DNS DNS or Domain Name Server is a system that translates Domain Names into IP addresses. Setting up a DNS will allow the router to contact the DNS to ask it to translate and find a web site you have entered. The following window allows you to set two DNS servers by th...
Page 50 - The router will first try the; Preferred DNS Server; to resolve a website’s URL IP address. If that IP; Alternate DNS Server; provide this information to you. Click; to set the DNS configurations into the memory of the; Dynamic DNS
DSL-524T ADSL Router Manual 50 The router will first try the Preferred DNS Server to resolve a website’s URL IP address. If that IP address fails to resolve the URL, the Router will then try the Alternate DNS Server . Your ISP must provide this information to you. Click Apply to set the DNS configur...
Page 51 - Advanced Configuration; The; UPnP
DSL-524T ADSL Router Manual 51 5 Advanced Configuration The Advanced tab has ten windows for you to view and configure, which are UpnP , Virutal Server , LAN Clients , SNMP , Filters , Bridge Filters , Routing , DMZ . Firewall , RIP , PPP , ADSL , and ATM VCC, and QoS . UPnP UPnP supports zero-confi...
Page 52 - Virtual Server
DSL-524T ADSL Router Manual 52 Figure 5- 1. UPnP window To enable UPnP for any available connection, click to check the Enable UPnP selection box, select the connection or connections on which you will enable UPnP listed under Available Connections and click the Apply button. Virtual Server To view ...
Page 53 - and then reboot to
DSL-524T ADSL Router Manual 53 HTTPS (Secure Web). Select a connection type and enter an IP address for the virtual server. After configuring the Router for these features, the Router will redirect these external services to an appropriate server on the users’ LAN. To choose a particular service cli...
Page 54 - LAN Clients; button or hyperlink in the; Advanced; setup menu. You can also click on the New IP
DSL-524T ADSL Router Manual 54 LAN Clients The LAN Clients menu is used when establishing Port Forwarding, Access Control and Advanced Security rules for IP addresses on the LAN. This menu can be accessed directly by clicking on the LAN Clients button or hyperlink in the Advanced setup menu. You can...
Page 55 - Add; button. In the example above, available addresses; Static; box for the address or addresses you want to eliminate and click on
DSL-524T ADSL Router Manual 55 Figure 5- 3. LAN Clients window To add a static IP address to the list of available IP addresses, type an IP address that falls within the range a available IP addresses and click on the Add button. In the example above, available addresses range from 10.0.0.1 to 10.25...
Page 56 - Reserve; box for the address or addresses you want to reserve; assignment and will be listed in the Static IP Addresses table.; This menu can be accessed directly by clicking on the; SNMP
DSL-524T ADSL Router Manual 56 Dynamically assigned IP addresses may be reserved so that the LAN IP address for the device does not expire. This will create a permanent entry for the device in the ARP table and in effect, it becomes a static IP address. Click to check the Reserve box for the address...
Page 58 - SNMP V1; Filters
DSL-524T ADSL Router Manual 58 relationship between the SNMP manager and an agent. The community string acts like a password to permit or deny access to an agent on the Router. The defining characteristic associated with the community string is the Access Right . The agent’s access right can be set ...
Page 59 - Source IP
DSL-524T ADSL Router Manual 59 Figure 5- 5. Filters window To configure filters for the router, configure the folowing fields and click Apply . Source IP Enter an IP address or range of addresses from which to block or allow packets. This field may also be used to block a set of subnet masks by usin...
Page 60 - to set the filters configured for this router.; Bridge Filters
DSL-524T ADSL Router Manual 60 the pull down menu is for ports that have a higher value than 1024. Destination Port Enter a port or range of ports to which to block or allow packets from being sent. This field can only be configured if TCP or UDP is selected in the Protocol field. The Safe Range opt...
Page 61 - Enable Bridge Filters; Any
DSL-524T ADSL Router Manual 61 Figure 5- 6. Bridge Filters window To add a bridge filter rule, check Enable Bridge Filters , type in a Source MAC, a Destination MAC or both in the entry fields. Select Any to apply the rule to any protocol that the router receives. The user may also specify a protoco...
Page 62 - Delete; box, and then click; . Remember to save the configuration changes.; Routing Table; Clicking the; Routing
DSL-524T ADSL Router Manual 62 remove a bridge filter from the table in the bottom half of the window, click to select the corresponding Delete box, and then click Apply . Remember to save the configuration changes. Routing Table Clicking the Routing tab will lead you to this window, which is used t...
Page 63 - to set the routing information configured.
DSL-524T ADSL Router Manual 63 The user may configure the following fields for Static routing on the router: Destination Enter the host IP address or the remote network that will be used for static routing on the router. Netmask Enter the Subnet Mask to be used for static routing. Gateway Enter the ...
Page 64 - DMZ; space provided and then enabling its status by clicking the
DSL-524T ADSL Router Manual 64 DMZ Firewalls may conflict with certain interactive applications such as video conferencing or playing Internet video games. For these applications, a firewall bypass can be set up using a DMZ IP address. The DMZ IP address is a “visible” address and does not benefit f...
Page 65 - when your configuration is complete.
DSL-524T ADSL Router Manual 65 Figure 5- 8. DMZ window Click Apply when your configuration is complete.
Page 66 - The DSL-524T ADSL Router comes equipped with a firewall. The; Firewall; configuration screen; tab at the top of the screen; Firewall
DSL-524T ADSL Router Manual 66 Firewall The DSL-524T ADSL Router comes equipped with a firewall. The Firewall configuration screen allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks. To configure the Router’s firewall, click the Adva...
Page 67 - This window has three filtering options for you to choose,
DSL-524T ADSL Router Manual 67 This window has three filtering options for you to choose, DoS (Denial of Service) Protection , Port Scan Protection and Service Filtering . DoS Protection and Port Scan Protection may be globally enabled on the router and then may be modified to the users preference b...
Page 68 - RIP
DSL-524T ADSL Router Manual 68 RIP The DSL-524T supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on the LAN, at your ISP’s location or remote networks connected to your network through the ADSL line. The user may enable or disable RIP v1 (received and sent) ...
Page 69 - RIPv1 Compatible; In; Both; configuration choices for RIP, click the; button to set the configurations in the memory of the; PPP
DSL-524T ADSL Router Manual 69 To configure RIP, first use the RIP pull-down menu to enable RIP on the Router. Then select the protocol to be used by using the pull-down menu. The choices are RIP v1 , RIPv1 Compatible and RIP v2 . Then the user must choose the direction by selecting In , Out or Both...
Page 70 - The window above displays the following information.; PVC; Connection Setting; Connection on Demand
DSL-524T ADSL Router Manual 70 Figure 5- 11. PPP window The window above displays the following information. PVC Displays the PVC currently in use on the Router. This router can be configured for eight PVCs. Connection State Displays the connection state of the PVC displayed above. Connection Settin...
Page 71 - Manual; ATM VCs List; to set the changes in the memory of the Router.; ADSL; after you have made the proper
DSL-524T ADSL Router Manual 71 connect to the Internet only when requested to by your computer. • Manual – Clicking this radio button will set the router to only connect when the user clicks the connect button in the previous field. ATM VCs List This field will display the status of PVCs currently i...
Page 73 - ATM VCC; section of the; to set changes into the Router’s
DSL-524T ADSL Router Manual 73 ATM VCC The ATM VCC window shows you the current WAN settings implemented on your modem under the heading ATM VCs List at the bottom of the screen. Selecting a Connection Type will change the window for the values for the Connection setting selected. These values have ...
Page 74 - QoS; check box. To enable
DSL-524T ADSL Router Manual 74 QoS QoS is an implementation of the IEEE 802.1p standard that allows network administrators a method of reserving bandwidth for important functions that require a large bandwidth or have a high priority, such as VoIP (voice-over Internet Protocol), web browsing applica...
Page 76 - Tools; Admin
DSL-524T ADSL Router Manual 76 6 Tools The Tools tab allows you to set up basic maintenance features on the modem. The windows available under this tab include Admin , Time , System, Firmware, and Test . Admin The Admin window allows you to configure a new password for the modem. There is only one a...
Page 77 - Figure 6- 1. Administrator Settings window; Time; to set
DSL-524T ADSL Router Manual 77 Figure 6- 1. Administrator Settings window Time The system time is the time used by the DSL-524T for scheduling services. You can manually set the time, connect to a NTP (Network Time Protocol) server or synchronize the time on the router with your PC. If an NTP server...
Page 78 - Remote Log
DSL-524T ADSL Router Manual 78 Figure 6- 2. Time window Remote Log Us the Remote Log menu to set up logging to servers or computers that are located outside the LAN or subnet of the Router.
Page 79 - Warning
DSL-524T ADSL Router Manual 79 Figure 6- 3. Remote Log Select the Log Level from the pull-down menu. The levels available are: Alert, Critical, Debug, Error, Info, Notice, Panic and Warning . Type in the IP address of a receiver for the log message in the Add an IP Address field and click on the Add...
Page 80 - System; Load Settings From Local Hard Drive; field by entering the; Browse; to find the; Load; to initiate the file transfer. Next, click save and reboot. You may; Restore
DSL-524T ADSL Router Manual 80 System This window offers four settings for the user to configure. The user may save the settings configured on the router by clicking the Save button. A file Download dialogue box will appear questioning the user where to save the files on your computer. Files will be...
Page 81 - Firmware; to browse the local hard driver and; to initiate the transfer. Please
DSL-524T ADSL Router Manual 81 Firmware You can upgrade the firmware of the ADSL Router at this page. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to browse the local hard driver and locate the firmware to be used for the update. Once found, clic...
Page 82 - Miscellaneous; Test
DSL-524T ADSL Router Manual 82 Miscellaneous The Ping Test menu allows you to ping any IP address from the Router to test connectivity to the address. To Ping a device, enter the IP address of the device that you wish to ping into the Ping IP Address field and click Ping to start the Ping mechanism....
Page 83 - Ping Primary
DSL-524T ADSL Router Manual 83 Figure 6- 7. Diagnostics window To perform the following tests, choose the PVC (Private Virtual Connection) that you wish to test and click Apply . Test results will either be displayed as Pass or Fail . The following tasks will be performed: Testing Ethernet LAN Conne...
Page 85 - Device Info; The device info window, located under the
DSL-524T ADSL Router Manual 85 7 Status The Status tab will allow users to check information about the Router, including Device Information , Log , Stats and the ADSL line. Device Info The device info window, located under the Status tab will allow users to view information regarding the settings of...
Page 86 - The following information is what is displayed in the; LAN
DSL-524T ADSL Router Manual 86 The following information is what is displayed in the Device Info window: LAN MAC Address Displays the MAC Address of the Router. IP Address Displays the current IP address of the Device. Subnet Mask Displays the Subnet Mask of the device. DHCP Server Displays the DHCP...
Page 87 - The DHCP Clients window, located under the; tab will allow users to view information
DSL-524T ADSL Router Manual 87 DHCP The DHCP Clients window, located under the Status tab will allow users to view information regarding the DHCP Clients on the Router. Figure 7- 2. DHCP Clients
Page 88 - Log; the log events, click; Clear Log; and a pop-up window will appear to
DSL-524T ADSL Router Manual 88 Log The Log window allows users to view events occurring within the Router by time and date. To clear the log events, click Clear Log . To save the log, click Save Log and a pop-up window will appear to find a folder on your computer to save the log files to. Figure 7-...
Page 89 - Ethernet; , which will subsequentially; Statistics; screen, as shown below. To refresh the stats in this window, click; Refresh
DSL-524T ADSL Router Manual 89 Statistics The Stats window will allow users to view transmiited and received packets occuring on the Router, both for the Ethernet connection and for the ADSL connection. To choose a interface to view statistics for, click the corresponding radio button for either ADS...
Page 90 - The ADSL Line window, located under the; tab, will allow users to monitor the speed of the; Line state; Down; Annex mode
DSL-524T ADSL Router Manual 90 ADSL The ADSL Line window, located under the Status tab, will allow users to monitor the speed of the upstream and downstream packet flow of the Router. Figure 7- 6. Status ADSL window The following information is displayed: ADSL Firmware Version The current Firmware v...
Page 91 - Max Tx Power; SNR Margin; Help
DSL-524T ADSL Router Manual 91 Max Tx Power This field displays the transmit output power level of the CPE. SNR Margin Amount of increased noise that can be tolerated while maintaining the designed BER (bit error rate). The SNR Margin is set by the Central Office DSLAM. If the SNR Margin is increase...
Page 94 - Technical Specifications; GENERAL; ADSL Standards
DSL-524T ADSL Router Manual 94 A Technical Specifications GENERAL Standards: ADSL Standards ANSI T1.413 Issue 2 ITU G.992.1 (G.dmt) AnnexA ITU G.992.2 (G.lite) Annex A ITU G.994.1 (G.hs) ADSL2 Standards ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.4 (G.lite.bis) Annex A ADSL Standards: ITU G.992.5 Anne...
Page 96 - IP Address Setup; Start; Properties; Using Default IP without DHCP
DSL-524T ADSL Router Manual 96 B IP Address Setup The DSL-524T is designed to provide network administrators maximum flexibility for IP addressing on the Ethernet LAN. The easiest IP setup choice in most cases is to let the Router do it using DHCP, which is enabled by default. This appendix briefly ...
Page 97 - LAN IP Address; Alternative IP Assignment
DSL-524T ADSL Router Manual 97 Computer #1 192.168.1.2 255.255.255.0 192.168.1.1 Computer #2 192.168.1.3 255.255.255.0 192.168.1.1 Computer #3 192.168.1.4 255.255.255.0 192.168.1.1 Please note that when using the default IP address as in the above example, the first three numbers in the IP address m...
Page 99 - IP Concepts; IP Addresses
DSL-524T ADSL Router Manual 99 C IP Concepts This appendix describes some basic IP concepts, the TCP/IP addressing scheme and show how to assign IP Addresses. When setting up the Router, you must make sure it has a valid IP address. Even if you will not use the WAN port (ADSL port), you should, at t...
Page 100 - IP Network Classes; to; network number; portion will be referred to as a; host number
DSL-524T ADSL Router Manual 100 Networks attached to the Internet are assigned class types that determine the maximum number of possible hosts per network. The previous figure illustrates how the net and host portions of the IP address differ among the three classes. Class A is assigned to networks ...
Page 101 - Address Allocation for Private Internets
DSL-524T ADSL Router Manual 101 B 172.16.0.0 172.31.255.25 5 C 192.168.0.0 192.168.255.2 55 It is recommended that you choose private network IP Addresses from the above list. For more information on address assignment, refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidel...
Page 102 - Subnet Mask; Class A
DSL-524T ADSL Router Manual 102 Subnet Mask In the absence of subnetworks, standard TCP/IP addressing may be used by specifying subnet masks as shown below. IP Class Subnet Mask Class A 255.0.0.0 Class B 255.255.0.0 Class C 255.255.255.0 Subnet mask settings other than those listed above add signifi...
Page 103 - Microfilters and Splitters; Microfilters; Microfilter Installation; Important
DSL-524T ADSL Router Manual 103 D Microfilters and Splitters Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services. These devices are commonly referred to as microfilters or sometimes called (inaccurately) line spli...
Page 104 - Line Splitter; - This port connects to the wall jack.; – This port connects to the Router.; Phone; – This port connects to a telephone or other telephone device.; Line Splitter Installation
DSL-524T ADSL Router Manual 104 Line Splitter If you are instructed to use a “line splitter”, you must install the device between the Router and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, the Route...
Page 105 - International Offices
International Offices U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA. 92708 TEL: 714-885-6000 Fax 866-743-4905 URL: www.dlink.com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295223 URL: www.dlink.ca Europe (U. K.) 4th Floor, Merit House Edgwar...
Page 106 - Registration Card
Registration Card Print, type or use block letters. Your name: Mr./Ms__________________________________________________________________________ Organization: ____________________________________________Dept.______________________________ Your title at organization:___________________________________...