D-Link DSL-320B - Manual

Section 1 - Product Overview D-Link DSL-320B User Manual 5 Introduction HIGH-SPEED ADSL2/2+ INTERNET CONNECTION Latest ADSL2/2+ standards provide Internet transmission of up to 24Mbps downstream, 1Mbps upstream. TOTAL SECURITY Firewall protection from Internet attacks, user access control. ULTIMATE ...

Section 1 - Product Overview D-Link DSL-320B User Manual 6 Features • DHCP Support - Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network. This eliminates the need to reconfigure every host whenever changes in network topology occ...

Section 1 - Product Overview D-Link DSL-320B User Manual 7 Hardware Overview Connections Power insert Use the adapter shipped with the Router to connect to power source Power button Push in to power-on the Router. Push again to power-off the Router Ethernet ports Use the Ethernet ports to connect th...

Section 1 - Product Overview D-Link DSL-320B User Manual 8 Hardware Overview LEDs Power Steady green light indicates the unit is powered on. When the device is powered off this remains dark. DSL Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process ...

Section 2 - Installation D-Link DSL-320B User Manual 9 Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please read a...

Section 2 - Installation D-Link DSL-320B User Manual 10 Installation Notes In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information (Username and Password) is require...

Section 2 - Installation D-Link DSL-320B User Manual 12 Information you will need from your ADSL service provider Username This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form [email protected]. Your ADSL service provider uses this to identify your acc...

Section 2 - Installation D-Link DSL-320B User Manual 14 Information you will need about DSL-320B Username This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Use...

Section 2 - Installation D-Link DSL-320B User Manual 15 Information you will need about your LAN or computer : Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-320B to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-320B to connect...

Section 2 - Installation D-Link DSL-320B User Manual 16 Device Installation The DSL-320B ADSL Router maintains two separate interfaces, an Ethernet LAN and an ADSL Internet (WAN) connection. Carefully consider the Router’s location suitable for connectivity for your Ethernet devices. You must have a...

Section 2 - Installation D-Link DSL-320B User Manual 17 Factory Reset Button The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence: 1. Press and hold the reset button while the device is power...

Section 3 - Configuration D-Link DSL-320B User Manual 19 Configuration This section will show you how to configure your new D-Link ADSL router using the web-based configuration utility. Web-based Configuration Utility Connect to the Router To configure the WAN connection used by the Router it is fir...

Section 3 - Configuration D-Link DSL-320B User Manual 20 SETUP This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to configure and monitor the Router including how to change IP settings and DHCP server setup. W...

Section 3 - Configuration D-Link DSL-320B User Manual 26 LAN SETUP You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router...

Section 3 - Configuration D-Link DSL-320B User Manual 28 TIME The TIME configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Dayligh...

Section 3 - Configuration D-Link DSL-320B User Manual 30 PARENTAL CONTROL Parental Control provides two useful tools for restricting Internet access. Block Websites allows you to quickly create a list of all web sites that you wish to stop users from accessing. Time Restrictions allows you to contro...

Section 3 - Configuration D-Link DSL-320B User Manual 32 LOGOUT The LOGOUT page enables you to logout of your router configuration and closes the browser. To access the LOGOUT setting window, click on the Logout button in the SETUP directory LOGOUT Click on the Logout button to logout of the router ...

Section 3 - Configuration D-Link DSL-320B User Manual 35 QOS SETUP Quality of Service Setup can be used to improve data flow for different applications by prioritizing the network traffic based on selected criteria. Q O S S E T U P You have to define the service ports. For example, VoIP(RTP) is from...

Section 3 - Configuration D-Link DSL-320B User Manual 37 OUTBOUND FILTER By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at least one condition below. All of the specified...

Section 3 - Configuration D-Link DSL-320B User Manual 38 INBOUND FILTER By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic by specifying a filter name and at least one condition below. All of t...

Section 3 - Configuration D-Link DSL-320B User Manual 39 DNS SETUP The DNS is used to resolve the DNS name to IPs. You can type or get automatically. The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc...) using a domain name that you have purchased (for example: www.what...

Section 3 - Configuration D-Link DSL-320B User Manual 41 VLAN The Virtual LAN (VLAN) allows you to configure a group of devices on one or more LANs so that they can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments. V L A N G R...

Section 3 - Configuration D-Link DSL-320B User Manual 44 ADVANCED ADSL The Advanced ADSL settings allow you to choose which ADSL modulation settings your modem router will support. D-Link do not recommend that you change these settings unless directed to do so by your ISP. A D V A N C E D A D S L S ...

Section 3 - Configuration D-Link DSL-320B User Manual 45 ADVANCED LAN These options are for users that wish to change the LAN settings. D-Link does not recommend changing these settings from factory default. Changing these settings may affect the behavior of your network. U P N P Please select the E...

Section 3 - Configuration D-Link DSL-320B User Manual 46 REMOTE MANAGEMENT This section allows you to enable/disable remote access to the router from the Internet. Advanced access control allows you to configure access via specific services. Most users will not need to change any of these settings. ...

Section 3 - Configuration D-Link DSL-320B User Manual 49 MAINTENANCE Click on the MAINTENANCE tab to reveal the window buttons for various functions located in this directory. PASSWORD The factory default password of this router is 'admin'. To help secure your network, D-Link recommends that you sho...

Section 3 - Configuration D-Link DSL-320B User Manual 50 SAVE/RESTORE SETTINGS Once the router is configured and you can save the configuration settings to a configuration file on your hard drive. You also have the option to load configuration settings, or restore the factory default settings. S A V...

Section 3 - Configuration D-Link DSL-320B User Manual 51 FIRMWARE UPDATE Use the FIRMWARE UPDATE window to load the latest firmware for the device. Note that the device configuration settings may return to the factory default settings, so make sure you first save the configuration settings with the ...

Section 3 - Configuration D-Link DSL-320B User Manual 52 DIAGNOSTICS Your router is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Re_run Diagnostics Tests" at the bottom of this page to make sure fail status is consist...

Section 3 - Configuration D-Link DSL-320B User Manual 53 SYSTEM LOG The system Log allows you to view the logs that have been created. S Y S T E M L O G Date/Time: Log date and time Message: All logged events will be displayed.

Section 3 - Configuration D-Link DSL-320B User Manual 56 CONNECTED CLIENTS This feature shows all the currently connected LAN computers. CONNECTED DHCP LAN CLIENTS This window displays all the entities which link to the LAN interface and obtained IP address from DHCP server successfully.

Section 3 - Configuration D-Link DSL-320B User Manual 57 STATISTICS This information reflects the current status of your router. WAN STATISTICS This window displays all the Received and Transmitted packet status on the WAN interface. LAN STATISTICS This window displays all the Received and Transmitt...

Section 4 - Troubleshooting D-Link DSL-320B User Manual 59 Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DSL-320B. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP....

Appendix A - Networking Basics D-Link DSL-320B User Manual 61 Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server automatically. To verify your IP address, please follow the steps ...

Appendix B – Technical Specification D-Link DSL-320B User Manual 63 Technical Specifications ADSL Standards • ANSI T1.413 Issue 2 • ITU G.992.1 (G.dmt) AnnexA • ITU G.992.2 (G.lite) Annex A • ITU G.994.1 (G.hs) • ITU G.992.5 Annex A ADSL2 Standards • ITU G.992.3 (G.dmt.bis) Annex A • ITU G.992.4 (G....