Page 2 - Manual Revisions; Preface
i D-Link DSL-2770L User Manual D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Trademarks D-Link and the D-Link logo are trademarks or registered trad...
Page 3 - Table of Contents
ii D-Link DSL-2770L User Manual Table of Contents Preface.................................................................................. i Manual Revisions ........................................................................... iTrademarks ........................................................
Page 5 - Product Overview; Package Contents
1 D-Link DSL-2770L User Manual Section 1 - Product Overview Product Overview Package Contents If any of the above items are missing, please contact your reseller. Note : Using a power supply with a different voltage rating than the one included with the DSL-2770L may cause damage and will void the w...
Page 6 - System Requirements
2 D-Link DSL-2770L User Manual Section 1 - Product Overview Network.Requirements • A subscription with an Internet Service Provider • A computer with 802.11n, g, or b wireless or an available Ethernet port Web-based.Configuration. Utility.Requirements Computer.with.the.following: • Windows®, Macinto...
Page 7 - Introduction
3 D-Link DSL-2770L User Manual Section 1 - Product Overview Introduction The D-Link ADSL2+ Gigabit Cloud Router N300 (DSL-2770L) comes equipped with four Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. It also uses 802.11n technology that significantly outperforms 802.11...
Page 8 - Features
4 D-Link DSL-2770L User Manual Section 1 - Product Overview •. Fast.Wireless. Networking - The DSL-2770L provides up to a full 300 Mbps * wireless connection with other 802.11n wireless clients. •. Cloud.Features - The DSL-2770L is mydlink-enabled so you can remotely access and mange your router fro...
Page 9 - Hardware Overview; Back
5 D-Link DSL-2770L User Manual Section 1 - Product Overview Hardware Overview Back 1 Wi-Fi On/Off Button Turns the wireless network on and off 2 Power Button Turns the DSL-2770L on and off. 3 USB Port Connects to a USB flash drive to share content , or connect it to a USB printer to share it on your...
Page 11 - Before you Begin; Installation
7 D-Link DSL-2770L User Manual Section 2 - Installation Before you Begin Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. • Please con...
Page 12 - Wireless Installation Considerations
8 D-Link DSL-2770L User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickn...
Page 19 - Web-based Configuration Utility
15 D-Link DSL-2770L User Manual Section 3 - Configuration Web-based Configuration Utility Enter your password. The password should be left blank by default. To access the configuration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local.. Windows and Mac users ma...
Page 20 - Internet Setup
16 D-Link DSL-2770L User Manual Section 3 - Configuration Internet Setup From this screen, you can set up various settings related to your Internet connection. ADSL Interface Ethernet/3G WAN Interface Click the Setup. button to see and edit your ADSL settings. Click this Setup button to see and edit...
Page 22 - Setup Wizard
18 D-Link DSL-2770L User Manual Section 3 - Configuration Setup Wizard This Wizard will help you set up an ADSL connection. Click Next to continue. Enter a password for your network and verify it in the box below, then click Next . Select your time zone from the drop-down menu and click Next .
Page 25 - Ethernet Over ATM(RFC1483 Bridged) with NAT
21 D-Link DSL-2770L User Manual Section 3 - Configuration Select Static. IP if your ISP assigned you an IP address, subnet mask, gateway, and DNS server address. In most cases, select Dynamic.IP . Enter the Primary and secondary DNS server IP addresses assigned by your ISP. If your ISP requires you ...
Page 27 - PPP over Ethernet
23 D-Link DSL-2770L User Manual Section 3 - Configuration PPP over Ethernet Check this box to enable IPv6/IPv4 dualstack. Enter the username for your ADSL account. Enter the password for your ADSL account, then type it again in the Verify Password box. You can enter a name for your service here. Ent...
Page 28 - PPP over ATM
24 D-Link DSL-2770L User Manual Section 3 - Configuration Check this box to enable IPv6/IPv4 dualstack. Enter the username for your ADSL account. Enter the password for your ADSL account, then type it again in the Verify PPPoA Password box. You can enter a name for your service here. Enter the IP ad...
Page 30 - Ethernet/3G WAN Interface
26 D-Link DSL-2770L User Manual Section 3 - Configuration Ethernet/3G WAN Interface If you clicked the Setup button for Ethernet/3G WAN Interface, you will see the following settings. You can click the Setup.Wizard. button to use a step-by-step wizard that guides you through configuration of your WA...
Page 31 - Static IP
27 D-Link DSL-2770L User Manual Section 3 - Configuration Static IP Only use Static IP if directed to by your Internet Service Provider. Select Static.IP. from the drop-down menu. Enter the IP address assigned to you by your Internet Service Provider. Enter the subnet mask assigned to you by your In...
Page 34 - PPTP
30 D-Link DSL-2770L User Manual Section 3 - Configuration Select PPTP.(Username/Password) from the drop-down menu. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic . Enter the IP address assigned to you by your Inter...
Page 38 - Wireless Settings; Manual
34 D-Link DSL-2770L User Manual Section 3 - Configuration Wireless Settings If you want to configure the wireless settings on your router using a guided wizard, click Wireless.Connection.Setup.Wizard . Click Wi-Fi. Protected. Setup if you want to add a wireless device using Wi-Fi Protected Setup (WP...
Page 39 - Wireless Connection Setup Wizard; BEST
35 D-Link DSL-2770L User Manual Section 3 - Configuration The Wireless Connection Setup Wizard is designed to guide you through a step-by-step process to configure your wireless network. Type your desired wireless network name (SSID), then click Next . Wireless Connection Setup Wizard Choose what le...
Page 40 - Wi-Fi Protected Setup
36 D-Link DSL-2770L User Manual Section 3 - Configuration Wi-Fi Protected Setup If you clicked on the Wi-Fi Protected Setup button on the Wireless Setup page, you will see this screen. The Wi-Fi Protected Setup page allows you to create a wireless connection between your router and a device automati...
Page 41 - Manual Wireless Settings
37 D-Link DSL-2770L User Manual Section 3 - Configuration Manual Wireless Settings Enable Wireless: Wireless Network Name (SSID): Auto Channel Scan: Wireless Channel: 802.11 Mode: Transmission Rate: Visibility Status: AP Isolation: Check the box to enable the wireless function. If you do not want to...
Page 44 - LAN Setup; Router Settings
40 D-Link DSL-2770L User Manual Section 3 - Configuration This section will allow you to change the local network settings of the router and to configure the DHCP settings. LAN Setup This section will allow you to configure the router settings. Router Settings Enter the IP address of the router. The...
Page 46 - Add DHCP Reservation
42 D-Link DSL-2770L User Manual Section 3 - Configuration Add DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within ...
Page 47 - Time and Date
43 D-Link DSL-2770L User Manual Section 3 - Configuration Time and Date When enabled, the router will automatically update its time by using an Internet time server. Alternatively, you can disable this option and manually set the time. Enter the IP address of a NTP server or select one from the drop...
Page 49 - Static IPv6
45 D-Link DSL-2770L User Manual Section 3 - Configuration Static IPv6 Enter the address settings supplied by your Internet provider (ISP). Enter a subnet prefix length. Enter the default gateway for your IPv6 connection. Enter the primary and secondary DNS server addresses. Enter the LAN (local) IPv...
Page 51 - PPPoE
47 D-Link DSL-2770L User Manual Section 3 - Configuration PPPoE Enter your PPPoE user name. Enter your PPPoE password. Enter the ISP Service Name. Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Enter the LAN (local)...
Page 53 - IPv6 in IPv4 Tunneling
49 D-Link DSL-2770L User Manual Section 3 - Configuration IPv6 in IPv4 Tunneling Enter the IPv4 remote address you will use. Enter the IPv4 local address you will use. Enter the IPv6 local address you will use. Enter the primary and secondary DNS server addresses. Enter the LAN (local) IPv6 address ...
Page 54 - PPPoA
50 D-Link DSL-2770L User Manual Section 3 - Configuration PPPoA Enter your PPPoA user name. Enter your PPPoA password. Enter the ISP Service Name. Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Enter the LAN (local)...
Page 55 - USB Services
51 D-Link DSL-2770L User Manual Section 3 - Configuration USB Services From this screen, you can set up various settings related to sharing files on a USB storage drive plugged into the DSL-2770L. Disk Utility: File Sharing: Access Control: iTunes Server: Download Assistant: Download Status: Web HDD...
Page 56 - Disk Utility
52 D-Link DSL-2770L User Manual Section 3 - Configuration Disk Utility Click this button to format the attached USB storage drive and prepare it for use. The drive will be formatted using the EXT3 file system. Warning : Formatting your drive will delete all files and folders stored on it. This will ...
Page 57 - File Sharing
53 D-Link DSL-2770L User Manual Section 3 - Configuration File Sharing Enter the name used to identify the USB drive on the network. Enter the network workgroup to join for the USB drive. Enter a comment to identify the USB drive on the network. Computer Name: WorkGroup: Server Comment: If you click...
Page 58 - Access Control
54 D-Link DSL-2770L User Manual Section 3 - Configuration Access Control Selecting Guest. mode will allow all users to access files on the USB storage drive. Selecting Authorization.mode will require users to enter a username and password in order to access files on the USB drive. To set up user acc...
Page 59 - iTunes Server
55 D-Link DSL-2770L User Manual Section 3 - Configuration iTunes Server Select whether to enable or disable the iTunes server feature. Enter a name to identify your iTunes server. Enter which port to use for the service. If you wish to protect access your files with a password, enter it here. Servic...
Page 60 - Download Assistant
56 D-Link DSL-2770L User Manual Section 3 - Configuration Select which type of download you want to add. If you select FTP , you will see these settings. Enter a name to identify the download job. Enter the full FTP address and port of the file you want to download. Enter the path you want to save t...
Page 62 - Download Status; Pause
58 D-Link DSL-2770L User Manual Section 3 - Configuration Download Status If you click Download Status on the NAS page, these settings will appear. Here you can view and manage the download tasks of the DSL-2770L. After selecting a task, you can click Pause / Resume to pause and resume a download, o...
Page 63 - Web HDD; Upload
59 D-Link DSL-2770L User Manual Section 3 - Configuration Web HDD If you click Web HDD on the NAS page, you can see the folders and files stored on your USB drive. Click on a folder to open it, or click the Back button to up a directory. Click Upload to upload a file to the current folder, or click ...
Page 65 - mydlink Settings
61 D-Link DSL-2770L User Manual Section 3 - Configuration mydlink Settings Displays whether your device is registered with a mydlink account or not. Click to go to open a wizard that will guide you through the process of registering your device to your mydlink account. If you don’t have a mydlink ac...
Page 66 - Advanced; Virtual Server
62 D-Link DSL-2770L User Manual Section 3 - Configuration Advanced This will allow you to forward a single port or a range of ports to a specific PC or device on your network. Virtual Server You can automatically fill information required for some commonly used services by using the Well.known.servi...
Page 67 - Application Rules
63 D-Link DSL-2770L User Manual Section 3 - Configuration You can automatically fill information required for some commonly used services by using the Popular. applications. dropdown box at the top, selecting a rule ID to copy the information to, then clicking the Copy.to button. This is the port us...
Page 68 - QoS Engine
64 D-Link DSL-2770L User Manual Section 3 - Configuration QoS Engine This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Select which WAN interface to adjust the QoS settings for. Enter the u...
Page 70 - Outbound Filters; Allow; Deny
66 D-Link DSL-2770L User Manual Section 3 - Configuration Outbound Filters The Outbound Filter option is an advanced method of controlling data sent out to the Internet. With this feature you can configure outbound data filtering rules that control data based on an IP address range. Select whether t...
Page 71 - Inbound Filters
67 D-Link DSL-2770L User Manual Section 3 - Configuration Enter the starting IP address and ports from outside your network. Enter 0.0.0.0 if you do not want to specify an IP range. Enter the ending IP address and ports inside your network. Enter 255.255.255.255 if you do not want to specify and IP ...
Page 72 - Wireless Filter
68 D-Link DSL-2770L User Manual Section 3 - Configuration Check this box to enable wireless filtering by MAC address. Select whether to Allow access to all computers specified, or to Deny. access to all computers specified. Enter a name for the filter rule. Enter the MAC address of the wireless devi...
Page 73 - DNS Setup
69 D-Link DSL-2770L User Manual Section 3 - Configuration Tick this checkbox to enable the DDNS feature. Select a DDNS service provider to use. Enter the Host. Name that you registered with your DDNS service provider. Enter the Username for your DDNS account. Enter the Password for your DDNS account...
Page 75 - Advanced Internet
71 D-Link DSL-2770L User Manual Section 3 - Configuration This shows you your current PVC settings. You can click the Add. button to add a new PVC setting, click the Edit button for a PVC setting to edit it, or tick the checkbox next to a setting and click Delete to remove it. Select which ADSL mode...
Page 76 - Advanced Wireless
72 D-Link DSL-2770L User Manual Section 3 - Configuration Advanced Wireless Specify a value for the beacon interval. Beacons are packets sent by an Access Point to synchronize a wireless network. 100 is the default setting and is recommended. Set the transmit power of the antennas. This value should...
Page 77 - Advanced LAN
73 D-Link DSL-2770L User Manual Section 3 - Configuration Advanced LAN Tick this checkbox to use the Universal Plug and Play (UPnP™) feature. UPNP provides compatibility with various networking equipment, software, and peripherals. Select the box to allow the WAN port to be “pinged.” Blocking WAN pi...
Page 78 - Port Mapping
74 D-Link DSL-2770L User Manual Section 3 - Configuration Port Mapping Enter the VID you want to use for each Ethernet port, as well as whether you want to apply Tx tagging for the port. Enter the VID you want to use for each wireless AP, as well as whether you want to apply Tx tagging for the port....
Page 79 - SNMP Setup
75 D-Link DSL-2770L User Manual Section 3 - Configuration SNMP Setup Set whether you want to enable local SNMP access for the router. Set whether you want to enable remote SNMP access for the router. Enter the community that the router will respond to for GetRequests. Enter the community that the ro...
Page 80 - Remote Management
76 D-Link DSL-2770L User Manual Section 3 - Configuration Remote Management Tick this box to enable remote management. This will allow you to access the web configuration interface remotely through the Internet. This may require you to know your IP address or set up DDNS. Enter the IP address you wa...
Page 81 - Routing
77 D-Link DSL-2770L User Manual Section 3 - Configuration Routing Select this box to enable routing, then select which routing protocol to use: •.RIPv1 : Protocol in which the IP address is routed through the internet. •.RIPv2 : Enhanced version of RIPv1 with added features such as Authentication, R...
Page 82 - IPv6 Firewall
78 D-Link DSL-2770L User Manual Section 3 - Configuration IPv6 Firewall Select whether to •.Turn.IPv6.Filtering.OFF •.Turn.IPv6.Filtering.ON.and.ALLOW.computers.listed.to.access. the.network (all computers not specified will be denied access) •.Turn.IPv6.Filtering.ON.and.DENY.computers.listed.to.acc...
Page 83 - Budget Quota
79 D-Link DSL-2770L User Manual Section 3 - Configuration Budget Quota Tick this box to enable quotas. Select which interface to apply the budget quota to. Enter the period of time to apply the budget quota to. After the time limit has passed, the quota will reset. Tick this box to enable download q...
Page 84 - Password; Tools
80 D-Link DSL-2770L User Manual Section 3 - Configuration Password This page will allow you to change the password used to log in to the web configuration interface. Tools To change the password, enter the current password, then the new password you want to use, then enter it again to confirm it, th...
Page 85 - Save/Restore Settings
81 D-Link DSL-2770L User Manual Section 3 - Configuration Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to select a location and file name for the setti...
Page 86 - Firmware Update
82 D-Link DSL-2770L User Manual Section 3 - Configuration Firmware Update Upload: Accept Unofficial Firmware: After you have downloaded the new firmware, click Browse... to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. Tick this box to allow unofficial...
Page 87 - Ping Test
83 D-Link DSL-2770L User Manual Section 3 - Configuration The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping . The results of your ping attempts will be displayed here. Ping Test Ping Test: Ping Results:
Page 88 - System Log
84 D-Link DSL-2770L User Manual Section 3 - Configuration System Log The router keeps a running log of events and activities occurring on the router. You may send these logs to a SysLog server on your network. Log Types: Enable E-mail Notification: To E-mail Address: E-mail Subject: SMTP Server/IP A...
Page 89 - Schedules
85 D-Link DSL-2770L User Manual Section 3 - Configuration The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. Enter a name for your new schedule. Select a day, a range of days, or All Week to include every day. Choose a 24 h...
Page 90 - Device Info; Status
86 D-Link DSL-2770L User Manual Section 3 - Configuration This page displays the current information for the DSL-2770L. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address, then a Release button and a Renew button will be ...
Page 91 - Routing Info
87 D-Link DSL-2770L User Manual Section 3 - Configuration Routing Info This page will display your current routing table.
Page 92 - IPv6 Status
88 D-Link DSL-2770L User Manual Section 3 - Configuration IPv6 Status The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
Page 93 - Support
89 D-Link DSL-2770L User Manual Section 3 - Configuration Support The Support pages let you jump to descriptions of the settings and their functions.
Page 95 - Enable Network USB on the D-Link Router; Connect a USB Printer to the D-Link Router
91 D-Link DSL-2770L User Manual Section 3 - Configuration Enable Network USB on the D-Link Router 1. Click on the D-Link Router in D-Link SharePort. 2. Click Enable . 3. The icon in the Windows System Tray should change to a icon. Connect a USB Printer to the D-Link Router D-Link SharePort automatic...
Page 96 - Connect a Wireless Client to your Router
92 D-Link DSL-2770L User Manual Section 4 - Security Connect a Wireless Client to your Router WPS Button Step.2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). The easiest and most secure way to connect your wireless device...
Page 97 - Windows® 7
93 D-Link DSL-2770L User Manual Section 4 - Security Windows® 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase bein...
Page 98 - Connect
94 D-Link DSL-2770L User Manual Section 4 - Security 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Netw...
Page 100 - WPS; Start; Computer; Network
96 D-Link DSL-2770L User Manual Section 4 - Security WPS The WPS feature of the DSL-2770L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left ...
Page 103 - Close
99 D-Link DSL-2770L User Manual Section 4 - Security 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need t...
Page 104 - Windows Vista®
100 D-Link DSL-2770L User Manual Section 5 - Connecting to a Wireless Network Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network...
Page 108 - Windows® XP
104 D-Link DSL-2770L User Manual Section 5 - Connecting to a Wireless Network Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the use...
Page 111 - Troubleshooting
107 D-Link DSL-2770L User Manual Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DSL-2770L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® X...
Page 113 - Run; command; OK
109 D-Link DSL-2770L User Manual Section 6 - Troubleshooting 3..Why.can’t.I.connect.to.certain.sites.or.send.and.receive.emails.when.connecting.through.my.router?. If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we sugge...
Page 115 - Wireless Basics
111 D-Link DSL-2770L User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-L...
Page 117 - Home
113 D-Link DSL-2770L User Manual Appendix A - Wireless Basics Wireless.Personal.Area.Network.(WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both ...
Page 118 - Tips; Eliminate.Interference
114 D-Link DSL-2770L User Manual Appendix A - Wireless Basics Where.is.wireless.used?. Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract ...
Page 119 - Infrastructure; Wireless Modes
115 D-Link DSL-2770L User Manual Appendix A - Wireless Basics Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up....
Page 120 - Networking Basics; Check your IP address; Enter
116 D-Link DSL-2770L User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address,...
Page 121 - Statically Assign an IP address
117 D-Link DSL-2770L User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step.1 Windows® 7 - Click on Start > Control.Panel > Network.and.Interne...
Page 122 - Technical Specifications
118 D-Link DSL-2770L User Manual Appendix C - Technical Specifications Technical Specifications Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab Wireless.Signal.Rates 1 . IEEE.802.11n.2.4GHz(HT20/40): • 144.4 Mbps (300) · 130 Mbps (270) • 115.6 Mbps (2...
