Page 2 - II; LIMITED WARRANTY; Limited Hardware Warranty:
II LIMITED WARRANTY D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Li...
Page 3 - III
III Spare parts and spare kits Ninety (90) days D-Link’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or ...
Page 4 - I V; Wichtige Sicherheitshinweise
I V product shall be insured and shipped to D-Link, 53 Discovery Drive, Irvine CA 92618, with all shipping costs prepaid. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the ...
Page 5 - Trademarks
V 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oderAerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Besc...
Page 6 - Copyright Statement; CE Mark Warning; Advertencia de Marca de la CE
VI D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All othertrademarks belong to their respective proprietors. Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make anyderivative such as translation, transformation, ...
Page 7 - VII; VCCI Warning
VII television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect th...
Page 8 - VIII; Table of Contents
VIII Table of Contents Chapter 1 Introduction................................................................................. 1 1.1 Functions and Features.................................................................... 1 1.2 Packing List ............................................................
Page 9 - Chapter 1 Introduction; fully understand the functions of the DI-704.
1 Chapter 1 Introduction Congratulations on your purchase of the DI-704 Broadband Router. The DI-704 is specifically designed for Small Office and Home Office needs. It provides a complete solution for Internet surfing and office resource sharing, and is easy for non-technical users to configure and...
Page 11 - Chapter 2 Hardware Installation; RESET; Orange; WAN
3 Chapter 2 Hardware Installation 2.1. Panel Layout 2.1 .1. Front Panel Figure 2-1 Front Panel RESET When RESET is pushed, system settings will be set to factory defaults. M1&M2 System status indicators, Orange . M1 is flashed once per second to indicate system is alive. When system is busy, M2 ...
Page 13 - Setup WAN connection:; prepare an Ethernet cable for connecting the DI-704 to your
5 Figure 2-5 Setup of LAN connections for DI-704. 2 . Setup WAN connection: prepare an Ethernet cable for connecting the DI-704 to your cable/ xDSL modem or Ethernet backbone. Figure 2-5 illustrates the WAN connection. 3 . Power on: Connect the power cord to power inlet and turn the power switch on....
Page 14 - Chapter 3 Network Settings and Software Installation; Appendix B
6 Chapter 3 Network Settings and Software Installation To use the DI-704 correctly, you have to properly configure the network settings of your computers and install the attached setup program into your MS Windows platform (Windows 95/98/ Me/NT/2000). 3.1 Make correct network settings to the compute...
Page 15 - Is the TCP/IP environment of your computers properly configured?; T i p
7 there must be something wrong with the installation. Follow the steps again to make sure the network settings are correct. You should check the following items in sequence: 1 . Is the Ethernet cable correctly connected between the DI-704 and your computer? T i p : The LAN LED of the DI-704 and the...
Page 16 - Chapter 4 Configuring The DI-704; disable the proxy
8 Chapter 4 Configuring The DI-704 The DI-704 provides a Web based configuration scheme, that is, configuring by Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platform. 4. 1 Start-up and Log in Activate your browser, open settings...
Page 17 - Renew; Sidenote
9 the System Password field and click on the Log in button. If the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main menu, there are several options for system administration. 4. 2 Status This option provides the function for observing t...
Page 18 - You can also reboot the DI-704 by clicking the; Reboot
10 4. 3 Tools This option enables you to change the administrator password, view the log, and clone the MAC address. You can also reboot the DI-704 by clicking the Reboot button. Note: We strongly recommend that the system password be changed for security reasons. If you forget the system password, ...
Page 19 - Change; Static IP Address
11 4. 4 Setup This option is crucial to enable the DI-704 to work properly. The setting items and the web appearance depend on the WAN type. Choose correct WAN type before you start. 1. LAN IP Address : the DI-704’s IP address. The default address is 192.168.123.254. You can change it to your need. ...
Page 23 - Popular application
15 4. 7 Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony and so on. Due to the firewall function, these applications can not work with a pure NAT router. Special Applications enables some of these applications to work with a NAT r...
Page 26 - Appendix A Console Mode; Hyper Terminal; S R; PW admin
18 Appendix A Console Mode When you forget the system password or the IP address of the DI-704, you need to enter console mode to reset them. Before invoking the console program, be sure to find a null modem cable and use it to connect from the DI-704’s COM port to your computer’s COM port. Then, ex...
Page 27 - Appendix B TCP/IP Configuration for Windows 95/98; manufactures
19 Appendix B TCP/IP Configuration for Windows 95/98 This section describes installing the TCP/IP protocol into your personal computer. Supposing you have successfully installed one network card on your personal computer. If not, please refer to your network card manual. Moreover, the Section B.2 te...
Page 32 - Appendix C Technical Specifications; Power; Operating Temperature:
24 Appendix C Technical Specifications Standards: • IEEE 802.3 10BASET-T Ethernet • IEEE 802.3u 100BASE-TX Fast Ethernet • IEEE 802.3x Flow Control • IEEE 802.1p Priority Queue • ANSI/IEEE 802.3 NWay auto-negotiation Management: • Web-Based Ports: • 4 x NWay 10BASE-T/100BASE-TX Fast Ethernet LAN • 1...
Page 33 - Offices
25 Offices AUSTRALIA D-LINK AUSTRALASIA Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TOLL FREE: 1800-177-100 (Australia), 0800-900900 (New Zealand) URL: www.dlink.com.au E-MAIL: [email protected], [email protected] CANADA D-LINK CANADA 21...
Page 34 - Registration Card
26 Registration Card Print, type or use block letters. Your name: Mr./Ms _____________________________________________________________________________Organization: ________________________________________________ Dept. ____________________________Your title at organization: _________________________...
