Page 2 - FCC Certifications; CE Mark Warning; VCCI Warning
2 FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, us...
Page 3 - LIMITED WARRANTY; Limited Hardware Warranty:
3 LIMITED WARRANTY D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from D-Link or its authorized reseller or distributor. Limited Hardware Warranty: D-Link warrants that the hardware portion of the D-Lin...
Page 6 - SYSTEM ENVIRONMENT; CONFIGURATION SETTINGS; GUI M; CHANGING PASSWORDS
6 TABLE OF CONTENTS INTRODUCTION ............................................................................................................. 8 SAMPLE APPLICATION .............................................................................................. 10 H ARDWARE ...............................
Page 7 - TERMINAL COMMANDS; BIOS; FIRMWARE UPGRADE
7 TCP/IP N ETWORK D IAGNOSIS ........................................................................................ 33 WINIPCFG ................................................................................................................ 33 PING.EXE ................................................
Page 8 - INTRODUCTION; Acts as a Firewall
8 INTRODUCTION Thank you for your purchase of the D-Link DI-701 Residential Gateway. Its main featuresinclude: • Acts as a Firewall • Protects your Computers from Intruders • Share your Cable/DSL Modem • Works with any Ethernet Connection • Supports up to 32 Computers The DI-701 functions as an IEEE...
Page 10 - SAMPLE APPLICATION; Figure 1: Small Office/ Home Office Setup
10 SAMPLE APPLICATION Figure 1: Small Office/ Home Office Setup
Page 11 - Hardware
11 Hardware Table 1: Essential Hardware Item Included in Standard package Description Purpose UTP Ethernetcross-over cable Connects from local port of DI-701 toEthernet Port on PC or Uplink port onHub/Switch Power adapter Connects from DI-701 to power source DI-701 Main Unit CD Contains Quick Starte...
Page 12 - HUB; A well-installed LAN environment; Hardware Connections; Figure 2: Hardware Connections; to connect the DSL/Cable Modem to the; Global
12 RS-232 cable (For terminalprogramconfiguration only) Console Port COM port A well-installed WAN environment (Cable Modem or ADSLModem) HUB A well-installed LAN environment Hardware Connections Figure 2: Hardware Connections 1. Make sure your DI-701 is installed and connected properly. Use a UTP E...
Page 13 - enabled
13 2. Use a CAT3 or CAT5 UTP Ethernet straight cable to connect the Local port to a free port on your hub or switch OR Use a CAT 3 or CAT5 Cross-Over cable to connect directly to a PC. 3. Connect the Power Adapter to the VDC IN port on the DI-701 and into a wall outlet. 4. Use an RS-232 cable to con...
Page 14 - Information from ISP; If your IP address is provided; Table 3: Assigned Addresses
14 Information from ISP If your IP address is provided dynamically by your ISP (Internet Service Provider), skip this step. If you have a static address from your ISP, gather the information shown in Table 3:Assigned Addresses and keep it for reference. Table 3: Assigned Addresses IP address ISP-ass...
Page 15 - Go to the
15 CONFIGURATION SETTINGS Before Getting Started The DI-701 can be configured through the setup program provided, through a terminalemulation program, such as Windows HyperTerminal, or through Telnet. The DI-701 canbe set with a range of options to allow it to function in most any network environmen...
Page 17 - Configuring in GUI Mode; Insert the included setup CD into your CD-ROM drive.; Find
17 Configuring in GUI Mode This section describes how to configure the DI-701 using the DI-701 Setup Software. Getting Started (GUI) 1. Insert the included setup CD into your CD-ROM drive. 2. The CD will auto run, click on the “Install DI-701 Setup Software” icon. 3. Once the Setup Software has been...
Page 20 - Select the; tab to change the administrator password as shown in Figure 7.; Virtual Server; Select the; tab to set the Virtual Server settings, see figure 8. Virtual Server
20 192.168.0.2). Is this example the gateway services would be offloaded to the DI-701. Management Select the Management tab to change the administrator password as shown in Figure 7. If your ISP requires that a Computer name be used to gain access to the Internet, enter theComputer name provided in...
Page 21 - Figure 8: Virtual Server
Page 22 - Run
22 CHANGING PASSWORDS The DI-701 contains 2 passwords, one for standard user access and one for Super Adminaccess. Your ISP may have set Super Admin access if you purchased your unit throughthem, and should not be changed in this case. For all other users it is recommended that youchange the default...
Page 27 - Save this configuration, and reboot device?
27 IP address for 10/100M LAN: [192.168.0.1] IP mask for 10/100M LAN: [255.255.255.0] Distribute configuration for PCs on LAN: [Yes] Distribute IP address pool start at: [192.168.0.2] DHCP IP address pool numbers: [32] Obtain configuration automatically: [No] IP address for 10M wan: [202.178.230.113...
Page 28 - Color
28 TROUBLESHOOTING Parts Names and Functions LED Indicators on the Front Panel Ports on the Rear Panel Figure 11: LED Indicators and Ports Table 4: LED Indicators and Connections LED Color Status Indicator Glowing Dim Flashing • Power Green Power On Power Off N/A. ‚ LocalLink Green Connected to a LA...
Page 29 - Cabling
29 Port Name Functions a VDC IN Connects the power adapter plug. b Console Connects an RS-232 serial cable to your computer for • Configuring from terminal programs • Firmware upgrade. c Global Connects to Ethernet port on Cable Modem or DSL Modem forInternet Access. d Local Connects to the Ethernet...
Page 30 - “My Internet application won't work”; Some applications that may be affected:
30 button on the bottom right and make sure your network adapter that is attached to the DI-701 is selected in the Ethernet Adapter Information box. Look at the box labeled DHCP Server, this should be the DI-701's IP address (192.168.0.1 asdefault). If it is not, or it is blank or reads 255.255.255....
Page 33 - TCP/IP Network Diagnosis; WINIPCFG
33 TCP/IP Network Diagnosis Execute WINIPCFG.EXE or PING.EXE for TCP/IP network diagnosis. WINIPCFG The WINIPCFG program is used to gather information about the TCP/IP connections thatare active on your system. It cannot be used to dynamically adjust TCP/IP connections. Youcan also renew leases (if ...
Page 34 - Or; Cable Connectivity Checkup
34 for a named resource are on top. The default gateway is the server to which the clientconnects to the Internet. The DHCP Server identifies the network server that assigns IPaddresses to computers logging onto the network. If the DI-701 is properly set up and working the following should be appare...
Page 35 - If successful, you can reach your ISP server.; Internet Connectivity Checkup; PING to an IP address or domain name on Internet.; Getting Technical Support
35 Device Alive Checkup Issue a PING command to the IP address of the device’s local port. The device and cable areworking properly if it is successful. ISP Connectivity Checkup Issue a PING command to the IP address of your ISP’s Gateway or DNS server. You mayneed to check the settings in the DI-70...
Page 37 - You may type; passwd; Example
37 TERMINAL COMMANDS You may type ? or help to list the main menu commands as below. command>help Internet SOAR version 1.67 ======================================================= Command Description ------------------------------------------------------- help Show this message passwd Change adm...
Page 38 - New password; show; Compared with; Configuration claiming; , meaning the configuration is still under; Configuration claimed; means; Configuration; , the local computer is not able to access the Internet.
38 COMMANDS>passwd Old password: New password (4 characters or numbers at most) : **** Re-type new password: **** show Displays the current configuration. For first-time login, the current configuration is thefactory default settings. Refer to section titled “Factory Default Setting” for detail. ...
Page 39 - New configuration will be:
39 Example: command>set Press <ENTER> if you agree with the default value, Or <ESC> to escape. IP address of local port [192.168.0.1]: SubNetmask of local port [255.255.255.0]: Distribute IP address to local computers? (Yes/No) [Yes]: Continuous IP address pool start at [192.168.0.2]:...
Page 40 - vserv; Natural; Example Add’’; Input port number or application name : 23; Example Show
40 IP address of global port : [203.66.81.201] SubNetmask of global port : [255.255.255.0] Device name : [CABLE_ISP] Gateway : [203.66.81.254] Primary DNS server : [203.66.81.251] Secondary DNS server : [203.66.81.252] Save and reboot ?(Yes/No) : [No] vserv Displays the internal virtual server mappi...
Page 41 - Example Del; Which item will be deleted : 2; Example Quit; release; Give up the obtained global port configuration
41 Input command : 1)Show 2)Add 3)Del 0)Quit: 1 Item Port(Application) Local server ==== ================= ================ 1. 80 (www) 192.168.0.12 2. 23 (telnet) 192.168.0.3 Example Del : Input command : 1)Show 2)Add 3)Del 0)Quit 3 Item Port(Application) Local server ==== ================= =======...
Page 42 - renew; Update global port configuration; user; IP address Node address Remainder time Host name
42 renew You must renew the global port configuration, after you have released it, to enable thedevice. The ‘Show’ command enables you to see the configuration. The device will not workuntil you have renewed the global port configuration. Example: command>renew Update global port configuration No...
Page 43 - session
43 192.168.0.9 00E0-9810-9999 expired Luke 192.168.0.10 0080-C849-0882 expired MIA 192.168.0.11 00E0-9812-3456 0:35:54 ACER370 192.168.0.12 0040-0517-79BE 0:38:45 CT2 192.168.0.13 00E0-9811-2233 0:41:45 Roxy_gino 192.168.0.14 0040-3390-A1D9 expired mailen2 Total 13 users, 8 active leases. Elapsed 2 ...
Page 45 - Super Admin Access; usrlimit; Connective users is limited to 32
45 Column Headings: IP client the IP address for the local computer Port client the port number for the local computer Port fake the translated port code from client port IP remote the IP address for the computer on Internet being accessed Port remote the port number for the remote computer Idle idl...
Page 47 - Resetting the BIOS
47 Number of IP address in pool : [2] Obtain global port configuration from ISP : [Yes] Device name : [Untitled] Gateway : [192.152.81.100] Primary DNS server : [192.152.81.1] Secondary DNS server : [0.0.0.0] Resetting the BIOS In the case that you have forgotten your passwords, the DI-701 can be re...
Page 48 - One free COM port on PC.; Performing a Firmware Upgrade; At the DOS prompt, run
48 FIRMWARE UPGRADE System Requirements • One free COM port on PC. • A pin-to-pin RS-232 cable. One end is 9 pin male connector, the other end is 9 or 25pin female connector depends on the COM port. • FWLOAD.EXE : This is a DOS program for firmware upload. You can execute this file in Windows 95/98/...
Page 49 - Restart the DI-701 to activate the new firmware.
49 If any error message appears, check the cable connectivity and make sure that you haveselected the correct COM port, then go through the steps again. Restart the DI-701 to activate the new firmware.
Page 50 - Index
50 Index Assigned Addresses............................. 14 Cable................................................... 36 cabling .................................................. 2 COM................................................... 23 computer ............................................. 15 Con...
