D-Link DFE-528TX - Manual
D-Link DFE-528TX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLUG IN THE POWER CORD AND TURN ON YOUR COMPUTER.; Installing the Drivers
- Page 3 – This; “Welcome”; screen; “Search for the best; for the drivers; Using the Hardware Update Wizard
- Page 4 – Click on; Using the Add Hardware Wizard
- Page 5 – scroll down and click on
- Page 6 – If any of the above items are missing, please contact your reseller.; “Install Drivers
- Page 9 – cases it may be necessary to “Release and Renew” the IP address.
Contents of Package:
•
DFE-528TX Ethernet PCI Adapter
•
Printed Quick Installation Guide
•
CD with Manual and Drivers
If any of the above items are missing, please contact your reseller.
Before you start, make sure to turn off your computer and
unplug the power cord.
Note: To avoid damage caused by static electricity, make sure to properly ground
yourself by first touching a metal part of your computer to discharge any static
electricity before working with the DFE-528TX 10/100 Mb Ethernet PCI Adapter.
•
Remove
the back cover of the computer.
•
Install
the DFE-528TX carefully and firmly into an available
PCI slot which is usually “white” or “cream” colored
•
Secure
the DFE-528TX with a screw.
•
Replace
the computer’s cover.
Installing the DFE-528TX
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLUG IN THE POWER CORD AND TURN ON YOUR COMPUTER. Go to START>SETTINGS> CONTROL PANEL> SYSTEM>HARDWARE>DEVICE MANAGER. Scroll down to “Network Adapters.” For most installations, Windows XP will automatically load “Realtek” drivers as shown at left. Right-click on “Realtek.” Click “Upd...
INSERT THE DFE-528TX DRIVER CD INTO THE CD-ROM DRIVE. This “Welcome” screen will appear. Select “Install from a list or specific location.” Click “Next.” Select “Search for the best drivers in these locations.” “Browse” for the drivers on the driver CD. (i.e., D:\WINXP, where “D” refers to the CD-RO...
Click on “D-Link DFE-528TX PCI Adapter” as shown. Click “Next.” Windows XP will load the drivers and required system files. -4- Using the Add Hardware Wizard (continued)
