Page 2 - Configuration; Creating a Samba network drive for saving video ..49; Troubleshooting; Table of Contents
2 D-Link DCS-7510 User Manual Table of Contents Product Overview ........................................................ 3 Features .................................................................. 4Package Contents ................................................... 5System Requirements ............
Page 3 - Product Overview
3 D-Link DCS-7510 User Manual Section 1 - Product Overview Product Overview The DCS-7510 is a day & night outdoor PoE network camera with built-in infrared LEDs. Equipped with a high- resolution CCD image sensor, this camera provides you with excellent image quality and level of detail. The DCS-...
Page 4 - Supports a variety of Protocols:; G Mobile Surveillance:; Features
4 D-Link DCS-7510 User Manual Section 1 - Product Overview • Supports a variety of Protocols: Supports TCP/IP networking, SMTP e-mail, HTTP, and other Internet related protocols. The DCS-7510 can easily be integrated into Internet/Intranet applications because of its standards-based features. • Auto...
Page 5 - If any of the above items are missing, please contact your reseller.; System Requirements; • Windows
5 D-Link DCS-7510 User Manual Section 1 - Product Overview • D-Link DCS-7510 Day & Night Outdoor PoE Network Camera• CAT5 Ethernet Cable• Power Adapter 12V, 1.25A• Wire-in Bracket• Screwdriver (for external focus and zoom adjustments)• Quick Installation Guide• User Manual and Software on CD• Sc...
Page 6 - Hardware Overview; Front; IR LEDs with Condenser
6 D-Link DCS-7510 User Manual Section 1 - Product Overview Hardware Overview Front IR LEDs with Condenser IR LEDs enables the camera to detect moving objects in total darkness for distances of up to 50 meters. Auto-iris (inside) Automatically adjusts the exposure according to the light conditions fo...
Page 7 - Back; Weatherproof Casing; Adjustable Top Shield
7 D-Link DCS-7510 User Manual Section 1 - Product Overview Hardware Overview Back Weatherproof Casing The camera is housed in an IP66 certified weatherproof casing, which protects it against rain and dust. Adjustable Top Shield Shields the camera sensor from direct sunlight while providing air venti...
Page 8 - Connectors; Reset Button
8 D-Link DCS-7510 User Manual Section 1 - Product Overview Hardware Overview Connectors Reset Button Resets the camera to factory defaults when pressed for 10 seconds. Microphone Connector Connect an external microphone to the microphone connector to hear what is happening near your camera. Link/Pow...
Page 9 - Hardware Installation; Mounting and Connecting the Camera
9 D-Link DCS-7510 User Manual Section 1 - Product Overview Hardware Installation Step1. Straighten the two sets of cables from the camera side by side. (Diagram1) Step2. Start by passing the two sets of cables through the camera bracket. (Diagram 2) Mounting and Connecting the Camera Diagram 1 Diagr...
Page 10 - Diagram 3
10 D-Link DCS-7510 User Manual Section 1 - Product Overview Step4. Attach the camera bracket to the wire-in bracket using screws. (Diagram 4) Diagram 3 Diagram 4 Step3. Next, continue passing the cables through the wire-in bracket, pulling them through the other end. (Diagram 3)
Page 11 - Refer to the; Hardware Overview, Connectors; section for details on the different connectors.; Diagram 5
11 D-Link DCS-7510 User Manual Section 1 - Product Overview Step5. Finally, attach the camera on the top of the camera bracket using screws. (Diagram 5) Step6. Connect the cables as required. (Diagram 6) Refer to the Hardware Overview, Connectors section for details on the different connectors. Diag...
Page 12 - Focus and Zoom Adjustment; The focus and zoom controls are located on the outside of
12 D-Link DCS-7510 User Manual Section 1 - Product Overview Focus and Zoom Adjustment The focus and zoom controls are located on the outside of the camera case for easy adjustments. Use the screwdriver provided to adjust the focus and zoom of your camera. Note: With a shorter focal length you will g...
Page 13 - command box type; Software Installation; Click; Setup Wizard
13 D-Link DCS-7510 User Manual Section 2 - Installation Insert the Installation DCS-7510 driver CD into your computer’s CD-ROM drive to start the autorun program. The Setup Wizard will guide you through the entire installation process from connecting your hardware to configuring your camera. If the ...
Page 15 - To start the installation process click; The installation may take several minutes to finish.; Next
15 D-Link DCS-7510 User Manual Section 2 - Installation To start the installation process click Next . Note: The installation may take several minutes to finish. Click Next
Page 16 - to complete the installation.; Finish
16 D-Link DCS-7510 User Manual Section 2 - Installation Click Finish to complete the installation. Click Finish
Page 17 - ffdshow; I Agree
17 D-Link DCS-7510 User Manual Section 2 - Installation Click ffdshow Click ffdshow from the autorun screen to install the proper codecs that will allow you to playback videos taken by the DCS-7510. Click I Agree
Page 18 - Select Language, and then click; Select Language, and then click; OK
18 D-Link DCS-7510 User Manual Section 2 - Installation Click OK Select Language, and then click OK Select Language, and then click OK Click Next
Page 22 - Select the speaker from your PC, and then clink; Install
22 D-Link DCS-7510 User Manual Section 2 - Installation Click Next Select the speaker from your PC, and then clink Next Click Install
Page 23 - Installing
23 D-Link DCS-7510 User Manual Section 2 - Installation Installing Click Finish
Page 24 - Using the Setup Wizard; Click the; icon that was created in your; Windows; D-Link Setup Wizard SE
24 D-Link DCS-7510 User Manual Section 3 - Configuration Configuration This section will help you configure your new D-Link Network Camera using the Setup Wizard . Using the Setup Wizard Click the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Click D-Link Setup Wizard SE
Page 25 - Enter the admin ID and password.; admin; with the password left blank.; The; will display the MAC address of the DCS-7510; Wizard; button to continue.
25 D-Link DCS-7510 User Manual Section 3 - Configuration Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank. Click Next The Setup Wizard will display the MAC address of the DCS-7510 and an IP Address (which may or may not be correct depending on your DC...
Page 26 - Alternatively, you can select; Static IP
26 D-Link DCS-7510 User Manual Section 3 - Configuration Alternatively, you can select Static IP to use the same IP address on camera start up. Click Next to continue. Click Next Select DHCP if you want to get an IP address automatically from your router or Internet service. Click Next to continue. ...
Page 27 - Link; to access the web configuration page. The; In this example, the IP address is; Restart
27 D-Link DCS-7510 User Manual Section 3 - Configuration Click Link Click Link to access the web configuration page. The Setup Wizard will automatically open your web browser and enter the IP address of your camera into a web browser. In this example, the IP address is http://192.168.1.185 . Your DC...
Page 28 - Setup Wizard, click; Go To Camera; Using the Configuration Menu
28 D-Link DCS-7510 User Manual Section 3 - Configuration Using the Configuration Menu After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-7510. At the end o...
Page 29 - Web-based Configuration Utility
29 D-Link DCS-7510 User Manual Section 3 - Configuration Web-based Configuration Utility Use the following sections to set up and configure your network camera: • LIVE VIDEO • SETUP • MAINTENANCE • STATUS • HELP
Page 30 - Live Video; You may also select your language setting using the drop-down menu.
30 D-Link DCS-7510 User Manual Section 3 - Configuration Live Video LIVE VIDEO > Camera This section shows your camera’s live video and event indicators. You can zoom in and out of the live video image using your mouse. Left-click to zoom in and right-click to zoom out on the image. Digital Input...
Page 31 - Setup > Audio and Video
31 D-Link DCS-7510 User Manual Section 3 - Configuration Video Profile: There are four different viewing profiles, which you can configure in Setup > Audio and Video . Full Screen: This allows you to view the video in full screen mode. To exit full screen mode, press the ESC key on your keyboard....
Page 32 - Setup; for initial network setup, and you can use the; Motion; Alternatively, you can manually set up your Internet; Motion Detection; Internet Connection Setup Wizard
32 D-Link DCS-7510 User Manual Section 3 - Configuration Setup SETUP > Setup Wizard The setup wizard guides you through the initial setup of your IP camera. You can use the Internet Connection Setup Wizard for initial network setup, and you can use the Motion Detection Setup Wizard to set up moti...
Page 34 - If you are using a PPPoE connection, check
34 D-Link DCS-7510 User Manual Section 3 - Configuration Click Next If you are using a PPPoE connection, check Enabled and enter the Username and Password for your PPPoE account. You can get this information from your Internet service provider (ISP). Click Next If you have a Dynamic DNS account and ...
Page 35 - Configure the time to ensure that all events are triggered,; DHCP; mode, you will see the following
35 D-Link DCS-7510 User Manual Section 3 - Configuration Click Next Configure the time to ensure that all events are triggered, captured and scheduled at the right time. Click Next to continue. Click Apply If you selected DHCP mode, you will see the following screen appear. Please note down this inf...
Page 36 - Motion Detection Setup Wizard; To draw a motion detection zone, select
36 D-Link DCS-7510 User Manual Section 3 - Configuration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to set up Motion Detection on your IP camera. Click Next to continue. Click Next This step allows you to enable or disable video motion and control the sen...
Page 37 - This step allows you to specify how event notifications; to
37 D-Link DCS-7510 User Manual Section 3 - Configuration Click Next This step allows you to specify how event notifications are sent from your camera, either through e-mail or FTP. Make sure you enter all the relevant information for your e-mail account or FTP server. Click Next to continue.
Page 38 - You have completed the; Motion Detection Wizard; Apply; to activate your settings.
38 D-Link DCS-7510 User Manual Section 3 - Configuration Click Apply You have completed the Motion Detection Wizard . Click Apply to activate your settings.
Page 39 - SETUP > Network Setup; Network Setup; allows you to configure your LAN and Internet settings.
39 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Network Setup Network Setup allows you to configure your LAN and Internet settings. Select this to allow your camera to get an IP address automatically from your router or Internet service. If you are not sure which LAN settings to ...
Page 40 - Save Settings; to save your changes, or click; Don’t Save Settings; to discard your changes.
40 D-Link DCS-7510 User Manual Section 3 - Configuration Enable UPnP: Enable UPnP port forwarding: Enable PPPoE: HTTP port: RTSP port: Universal Plug & Play (UPnP) allows Windows PCs to find this camera under “Network Neighborhood” without configuration. Enables your camera to add port forwardin...
Page 41 - to discard your changes
41 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Dynamic DNS If you have a DSL or Cable service provider that changes your modem IP address periodically, Dynamic DNS (Domain Name System - a method of keeping a domain name linked to a dynamic IP address) is useful. With the DCS-751...
Page 42 - Image Setup; video window in the middle of the screen.; Reset to Default; to reset your settings.
42 D-Link DCS-7510 User Manual Section 3 - Configuration Brightness: Saturation: Contrast: Hue: This adjusts the brightness of the camera image. This adjusts the color saturation of the camera image. This adjusts the contrast of the camera image. This adjusts the color tone of the camera image. SETU...
Page 43 - SETUP > Audio and Video; Audio and Video
43 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Audio and Video Audio and Video allows you to configure four video profiles with different settings for your camera. You may also set up different profiles for your computer and mobile display. In addition, you may configure the aud...
Page 45 - to save your changes,; Don’t Save Settings; SETUP > Motion Detection; on your IP camera. In order to use motion detection, you must first; Enable Video Motion
45 D-Link DCS-7510 User Manual Section 3 - Configuration Enable Video Motion: Sensitivity: Draw motion area: Erase motion area: Clear: Select to turn on the motion detection feature of your camera. This setting adjusts how sensitive the camera will be to motion, where 100% will be the most sensitive...
Page 46 - SETUP > Time and Date; Time and Date
46 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Time and Date Time and Date allows you to configure, update and maintain the internal system clock for your camera. You can manually set your time zone from the drop-down box or automatically synchronize your time using Network Time...
Page 47 - Recording; allows you to configure recording settings and scheduling.
47 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Recording Recording allows you to configure recording settings and scheduling. Select to enable the recording feature. Select Anonymous if no user name or password is required to access your Samba drive. If you require a user name a...
Page 49 - Creating a Samba network drive for saving video
49 D-Link DCS-7510 User Manual Section 3 - Configuration Creating a Samba network drive for saving video Follow the instructions below to create a simple Samba network drive on your Windows PC. Right-click on a folder and select 1. Sharing and Security and then select Share this folder . Enter a Sha...
Page 50 - Snapshot
50 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > Snapshot Snapshot enables your camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail address and/or to an FTP server. Check this box to enable the snapshot feature. Select one or more events to trigger...
Page 52 - SETUP > Digital Output; Digital Output; Don’t
52 D-Link DCS-7510 User Manual Section 3 - Configuration Enable D/O signal: Trigger Event: This enables the D/O to send a signal when there is a triggered event. Use the checkboxes to configure the camera to send a signal through the D/O port whenever motion is detected, or when a signal is detected...
Page 53 - You may configure the
53 D-Link DCS-7510 User Manual Section 3 - Configuration SETUP > RS-485 You may configure the RS-485 settings or communication specifications (baud rate, data bit, stop bit, and parity bit) for your camera. RS-485 is a serial communication method for computers and devices. For your camera, RS-485...
Page 54 - settings for your camera.
54 D-Link DCS-7510 User Manual Section 3 - Configuration MAINTENANCE > Admin Here, you can modify the Admin password and manage users. You can also use this section to configure the OSD settings for your camera. Admin Password Setting: New Password: Retype Password: Add User Account: User Name: N...
Page 55 - Save; to save your changes.
55 D-Link DCS-7510 User Manual Section 3 - Configuration User List: Device Setting: Camera Name: Enable OSD: Label: Show time: LED light: You can view the current list of users by using the drop-down box. You can also delete a user by selecting them with the drop-down box, and then clicking Delete ....
Page 56 - default or reboot the device.
56 D-Link DCS-7510 User Manual Section 3 - Configuration Save To Local Hard Drive: Local From Local Hard Drive: Restore To Factory Default: Reboot Device: Click Save Configuration to save the current configuration to a hard drive. To load a saved configuration, click Browse to select a configuration...
Page 57 - Firmware Upgrade; and; connection from your computer or camera. Upgrading the
57 D-Link DCS-7510 User Manual Section 3 - Configuration MAINTENANCE > Firmware Upgrade Your current firmware version and date will be displayed on this page. Here, you can also upgrade your firmware with a new version. To upgrade your firmware, go to support.dlink.com.tw and download the latest ...
Page 58 - This; Device Info
58 D-Link DCS-7510 User Manual Section 3 - Configuration STATUS > Device Info This Device Info screen shows you various information about your camera and its current settings.
Page 59 - Download; you can empty the log by clicking; Clear
59 D-Link DCS-7510 User Manual Section 3 - Configuration STATUS > Logs The log shows you a list of events that have happened recently. You can download the log by clicking Download , or you can empty the log by clicking Clear .
Page 60 - Help
60 D-Link DCS-7510 User Manual Section 3 - Configuration Help The Help screen provides you with support information about the DCS-7510 for your reference.
Page 61 - locally or through the Internet via a Web browser.; What algorithm is used to compress the digital image?; “snapshot” button to capture the image and save it to your hard drive.; What network cabling is required for the Network Camera?
61 D-Link DCS-7510 User Manual Section 5 - Troubleshooting 1. What is a Network Camera? An Network Camera is a standalone system that connects directly to an Ethernet or Fast Ethernet network whereas conventional PC Cameras require connection to a powered PC to function. An Network Camera is an all-...
Page 62 - Why am I unable to access the DCS-7510 from a Web browser?; problem is not solved the Network Camera might be faulty.; Why does the Network Camera work locally but not externally?; Network Camera to be accessed outside your local LAN.; error upon running the Installation Wizard.; saturation. Please refer to the
62 D-Link DCS-7510 User Manual Section 5 - Troubleshooting If a firewall exists on the network, port 80 needs to be opened for ordinary data communication, streaming audio, streaming video. The DCS-7510 uses port 5002 for streaming audio and port 5003 for streaming video. These ports or the ports yo...
Page 64 - Networking Basics; Check your IP address; Click on; Start; . In the run box type; cmd; and click; and press; Enter; This will display the IP address, subnet mask, and
64 D-Link DCS-7510 User Manual Appendix A - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please fol...
Page 65 - Assigning a Static IP Address; Network Connections; which represents your D-Link network adapter and select
65 D-Link DCS-7510 User Manual Appendix A - Networking Basics Assigning a Static IP Address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows ® XP - Click on Start > Control Panel > Network Connections ....
Page 66 - Technical Specifications; Networking
66 D-Link DCS-7510 User Manual Appendix B - Technical Specifications Technical Specifications Video Codec MPEG4 / MJPEG Audio Codec GSM-AMR: 12.2Kbps, PCM: 8Kbps Full-duplex audio communication PoE Supports IEEE 802.3af standard Sensor 1/3” CCD sensor, interlace scan mode SDRAM 64 Mbytes ...
Page 67 - Video; Operating System
67 D-Link DCS-7510 User Manual Appendix B - Technical Specifications RTSP RTCP 3GPP Ethernet 10/100M BaseT Fast Ethernet auto negotiation Video Algorithm Supported Simultaneous MPEG4/MJPEG dual format compression JPEG for still images Features Adjustable image size and quality Time sta...