D-Link DCM-202 - Manual
D-Link DCM-202 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Requirements
- Page 4 – Ethernet Installation Process
- Page 5 – Appendix; Check the LEDs
- Page 6 – Troubleshooting
- Page 7 – Tech Support for customers within the United States:; Technical Support; D-Link Technical Support over the Telephone:; Tech Support for customers within Canada:
1
DCM-202
D-Link Cable Modem
D-Link Cable Modem
D-Link Cable Modem
D-Link Cable Modem
D-Link Cable Modem
This product contains drivers that work with the
following operating systems:
Windows XP,
Windows 2000, Windows Me, and
Windows 98SE.
Before You Begin
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
These are the items included with your DCM-202 purchase:
D-Link Cable Modem DCM-202
CD-ROM (containing USB Drivers, Manual,
and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
USB Cable
12V DC, 1A Power Adapter
Decide which setup mode (Ethernet NIC or USB) you want to use and follow the
installation process for that setup mode.
Local Cable Network Service
Before installing the cable modem, contact your local cable service provider to
check the availability of Internet/Cable network access. Read this Quick Installation
Guide thoroughly before attempting to install the cable modem.
Device Stand
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DCM-202. 02132004
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 Connect the Cables and Power Adapter To use the computer’s USB interface to connect to the Internet, use the provided USBcable to connect the computer and the cable modem. A. Power off the computer.B. Unplug the computer’s power cable.C. Connect the RF coaxial cable (not included) to the back of...
6 7 Ethernet Installation Process Configure the TCP/IP Protocol on Your PC Before installing the cable modem in the Ethernet mode, you must verify that yourcomputer has the TCP/IP protocol installed. Follow the procedure for your computer’s operating system to verify or install the TCP/IP protocol. ...
8 9 Product Specifications Dimensions: 142 x 120 x 30mm5.6 x 4.7 x 1.2inNet Weight: 345g +/- 10g (0.76lb)DC Input Voltage: 12VDC/1APower Dissipation (Max): 8 WattsOperating Temperature: O ° C ~ 40 ° C 32 ° C ~ 104 ° F Operating Humidity: 10%~90%Cable Network Interface: F Type RF ConnectorLAN Access ...
