Page 2 - Contents
2 Contents Package Contents ..................................................................3 System Requirements for Configuration ...............................4 Local Cable Network Service .................................................5 Prepare Your Workspace for the Installation .............
Page 3 - Package Contents; If any of the above items are missing, please contact your reseller.
3 Contents of Package: D-Link DCM-201 USB/Ethernet Broadband Cable Modem Manual, Warranty and Drivers on CD Printed Quick Installation Guide Package Contents If any of the above items are missing, please contact your reseller. n n n n n n CAUTION! You must use the 12VDC/1.25A power adapter that come...
Page 4 - System Requirements for Configuration:; To install the cable modem using the Ethernet port:
4 System Requirements for Configuration: A cable-line splitter (not included), if you plan to have the cable modemand a television connected to the same wall cable outlet. An active two-way cable line. To install the cable modem using the Ethernet port: n Verify that you have these items before begi...
Page 5 - Before installing the modem:; Read this entire User’s Manual from front to back in sequence.; Local Cable Network Service; To prepare your workspace:; Prepare the cable modem:
5 Before installing the modem: 1 Read this entire User’s Manual from front to back in sequence. 2 Find the Serial Number, RF and Ethernet address located on a sticker on the cable modem and write them here: Serial Number S/N: ____________________ RF and ETH MAC: ____________________ USB MAC: _______...
Page 7 - Introduction
7 Introduction Thank you for purchasing the D-Link “Broadband Cable Modem with USB &Ethernet” DCM-201, which is an MCNS DOCSIS™ 1.1 cable modemfeaturing the latest DOCSIS technology. The cable modem enables your network cable operator to provide you withbroadband applications such as telecommuni...
Page 10 - Be sure to read this entire User’s Manual from front to back in; Verify the TCP/IP Protocol Configuration; Places icon) on the Windows desktop and click Properties.
10 Installing the Cable Modem Using the Ethernet Port CAUTION! Be sure to read this entire User’s Manual from front to back in sequence before installing the D-Link DCM-201 USB/Ethernet BroadbandCable Modem. This chapter describes how to install the cable modem using the Ethernetport. Using the Ethe...
Page 11 - continued; To configure TCP/IP on your Windows XP and Windows 2000 PC:
11 2 Look for an entry named TCP/IP. If you see TCP/IP listed next to yourEthernet hardware device, you can now go to the section “Connecting theCable Modem”. However, if TCP/IP is not listed, you must complete thefollowing steps. a Click Add. b Click Protocol and click Add. c Click Microsoft in the...
Page 12 - Configuring TCP/IP on a Macintosh Computer
12 Configuring TCP/IP on the Windows NT 4.0 OperatingSystems To configure TCP/IP on your Windows NT 4.0 PC: 1 Right-click the Network Neighborhood icon and click Properties. 2 Click the Bindings tab 3 Select All Protocols from the Show bindings drop-down list. 4 Look for an entry named TCP/IP . If y...
Page 13 - Connecting the Cable Modem
13 10 Click OK . If you have made any changes, you are prompted to save the settings. 11 Click OK to save the settings and exit 12 Click OK and close the TCP/IP Control Panel (click File and scroll down to click Close) . To configure TCP/IP on a Macintosh (continued): Connecting the Cable Modem Inst...
Page 14 - winipcfg
14 3 Power cycle the cable modem by unplugging the power adapter from its electrical outlet and then plugging it back into the outlet. Then try accessing the Internet. 4 Power cycle the computer Problem: “I cannot access my e-mail or Internet service.” (continued) a Power off the computer. b Unplug ...
Page 15 - exit
15 To release and renew the IP address for the Windows XP,Windows 2000, and Windows NT 4.0 operating system:1 Click Start and select Programs , then Accessories . 2 Click Command Prompt . 3 At the command prompt (C:\), type ipconfig/release . Windows releases the IP address. 4 At the command prompt ...
Page 16 - Installing the Cable Modem Using the USB Port
16 Installing the Cable Modem Using the USB Port DCM-201
Page 17 - To install the hardware:
17 This chapter describes how to install the cable modem using the USB port.First you connect the hardware (cable modem and power adapter). You theninstall the software drivers and verify that the modem is operating properly.The USB port does not support the Macintosh operating system.Using the USB ...
Page 18 - Installing the Software Drivers; Power on the computer. After the computer boots up:
18 Installing the Hardware (Cable Modem and PowerAdapter) continued 6 Plug the cable modem’s power adapter into the cable modem’s power jack and into a grounded electrical outlet or surge protector that is plugged into a grounded electrical outlet. 7 You must now install the software drivers provide...
Page 19 - When the; Found New Hardware Wizard; completes the installation,; Finish
19 Installing the Software Drivers (Windows XP OS)continued... 3 When the Found New Hardware Wizard completes the installation, click Finish .
Page 20 - Installing the Software Drivers (Windows 2000 OS)
20 Installing the Software Drivers (Windows 2000 OS) This section explains how to install the cable modem using the USBConnections with the Windows 2000 operating system (OS). c The Found New Hardware Wizard screen appears. 3 Select Search for a suitable driver for my device (recommended) and click ...
Page 21 - OK
21 Installing the Software Drivers (Windows 2000 OS) (continued) 5 When the correct location of the driver file appears, click OK . 6 The Found New Hardware Wizard displays the search results. 7 Click Next to install the driver files for the cable modem. 4 Check the CD-ROM Drives check box and click...
Page 22 - Click
22 Installing the Software Drivers (Windows 2000 OS) (continued) 8 Click Finish to continue. 10 Select Search for a suitable driver for my device (recommended) and click Next . 9 The Found New Hardware Wizard screen appears
Page 23 - Next
23 Installing the Software Drivers (Windows 2000 OS) (continued) 11 Check the CD-ROM Drives check box and click Next to search for the necessary driver files. 12 When the correct location of the driver file appears, click OK . 13 The Found New Hardware Wizard displays the search results. 14 Click Ne...
Page 24 - Found New Hardware; Installing the Software Drivers (Windows Me OS)
24 Installing the Software Drivers (Windows 2000 OS) (continued) 2 Power on the computer. After the computer boots up: a Windows detects the cable modem. b The Found New Hardware screen appears. 15 Click Finish . Installing the Software Drivers (Windows Me OS) This section explains how to install th...
Page 25 - Select
25 Installing the Software Drivers (Windows Me OS) (continued) 3 Select Specify the location of the driver (Advanced) and click Next . c The Add New Hardware Wizard screen appears. Click Finish .
Page 27 - Troubleshooting the USB Installation
27 Troubleshooting the USB Installation The following troubleshooting procedures apply to the USB installation. Problem: “I cannot access my e-mail or Internet service.” 1 Verify that the Power, Cable, and Status, and USB LEDs are lit and not blinking. 2 Verify that the USB LED is green or blinking ...
Page 30 - Cable Modem Front and Rear Panels; Front Panel LEDs
30 Cable Modem Front and Rear Panels This chapter describes the light emitting diodes (LEDs) on the front paneland the connectors on the rear panel of the cable modem. Front Panel LEDs The LEDs on the cable modem indicate: • The current performance of the cable modem. • The condition of the network ...
Page 31 - What the LED Activity Means; LED LABEL COLOR DESCRIPTION
31 Power Green Cable modem is plugged in to anelectrical outlet and is and receivingpower Cable Orange-Blinking The modem is searching for theDOWNSTREAM frequency Orange Downstream frequency is locked.Searching for UPSTREAM frequency Green Upstream frequency is locked Status Green-Blinking Modem is ...
Page 32 - Back Panel Connectors; ETHERNET; RJ-45 female port for connection of Ethernet cable; USB; You must use the 12VDC/1.25A power adapter that; RESET; Restores factory default settings
32 Back Panel Connectors Descriptions of the Back Panel Connectors ETHERNET RJ-45 female port for connection of Ethernet cable USB USB ‘B’-type port. Connects through USB cable to acomputer’s USB ‘A’-type port. CATV RF connector to attach the cable for broadband Internetaccess POWER Jack to connect ...
Page 33 - Technical Specifications
33 Technical Specifications Dimensions 120mm (L) x 142mm (W) x 30mm (H)4.7in x 5.6in x 1.2in Power Supply 12V/1.25A Power Consumption 8 Watts Operating Temperature 0°C ~ 40°C (32°F ~ 104°F) Operating Humidity 10%~90% Non-Condensing Cable Interface Female “F” Type RF Connector CPE Interface RJ-45 10/...
Page 34 - Contacting Technical Support; D-Link Technical Support over the Telephone:; Model number or product name
34 Contacting Technical Support You can find the most recent software and user documentation on the D-Linkwebsite. D-Link provides free technical support for customers within the United Statesfor the duration of the warranty period on this product.U.S. customers can contact D-Link technical support ...
Page 35 - Warranty and Registration
35 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limitedwarranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor andProducts purchased and delivered within ...
