Page 2 - Table of Contents
2 D-Link DAP-3410 User Manual Table of Contents Package Contents ......................................................................... 4System Requirements ................................................................. 5Introduction ...............................................................
Page 4 - Package Contents
4 D-Link DAP-3410 User Manual Section 1 - Product Overview Note: Using a power supply with a different voltage rating or PoE injector than the one included with the DAP-3410 will cause damage and void the warranty for this product. Package Contents DAP-3410 Wireless N Exterior Access Point Quick Ins...
Page 5 - System Requirements
5 D-Link DAP-3410 User Manual Section 1 - Product Overview System Requirements Network Requirements • An Ethernet-based Network • IEEE 802.11a/n wireless clients (AP Mode) • IEEE 802.11a/n wireless network (AP Mode) Web-based Configuration Utility Requirements Computer with the following: • Windows®...
Page 6 - Introduction
6 D-Link DAP-3410 User Manual Section 1 - Product Overview Introduction D-Link, an industry leader in networking, introduces the new D-Link DAP-3410 Wireless N Exterior Access Point. With the ability to transfer files with a maximum wireless signal rate of up to 300 Mbps 1 , the DAP-3410 gives you a...
Page 8 - Features
8 D-Link DAP-3410 User Manual Section 1 - Product Overview • Faster Wireless Networking - The DAP-3410 provides an up to 300 Mbps 2 wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gam...
Page 9 - Hardware Overview; Connections
9 D-Link DAP-3410 User Manual Section 1 - Product Overview Hardware Overview Connections 1 LAN Port Connects to 10/100 Ethernet devices such as computers, switches, and hubs. 2 LAN (PoE) Port Power is supplied through the LAN cable connected in this port via the Power over Ethernet Injector. Please ...
Page 11 - Installation
11 D-Link DAP-3410 User Manual Section 2 - Installation Installation First, you will need to configure the DAP-3410 with a computer connected directly to the unit. The following pages explains how to set up the DAP-3410 in order to be properly configured and then tested to work as desired. The DAP-3...
Page 12 - DATA IN; PoE Injector; POWER; Router or Switch Computer
12 D-Link DAP-3410 User Manual Section 2 - Installation A. Connect the Ethernet cable that is connected to the AP from STEP 1 to the P+DATA OUT port on the PoE Injector. B. Connect an Ethernet cable from a router, switch, or PC to the DATA IN port on the PoE Injector. C. Attach the power adapter to ...
Page 13 - PoE; PoE Passthrough
13 D-Link DAP-3410 User Manual Section 2 - Installation A. Power on the AP through the PoE kit (as in STEP 4) and connect the camera to the LAN 2 port. B. Log in to the web UI and enable PoE Passthrough in Maintenance to power on the camera. * 2 The LAN 2 port can be connected to D-Link cameras that...
Page 14 - Wireless Installation Considerations
14 D-Link DAP-3410 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link Wireless N Exterior Access Point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that t...
Page 15 - Configuration; Web-based Configuration Utility
15 D-Link DAP-3410 User Manual Section 3 - Configuration Configuration This section will show you how to configure your new D-Link Wireless N Exterior Access Point using the web-based configuration utility. Web-based Configuration Utility If you wish to change the default settings or optimise the pe...
Page 16 - Operating Modes
16 D-Link DAP-3410 User Manual Section 3 - Configuration Operating Modes In access point (AP) mode, 802.11n/g/b compliant devices can connect to the wireless network. Wireless distribution system (WDS) with AP mode expands current wireless coverage and also allows devices to connect to the network. ...
Page 17 - Basic Settings
17 D-Link DAP-3410 User Manual Section 3 - Configuration Basic Settings The image to the right shows a configuration menu tree for when the AP is in Access Point mode. If you need help determining which operating mode the AP is currently in, please see “Operating Modes” on page 16. Note: The DAP-341...
Page 18 - Wireless Settings
18 D-Link DAP-3410 User Manual Section 3 - Configuration Wireless Settings Network Name (SSID): SSID Visibility: Auto Channel Selection: Channel: Channel Width: Extension Channel: Authentication: Enter a name for your wireless network (SSID). For security purposes, it is highly recommended to change...
Page 19 - Open System/Shared Key Authentication
19 D-Link DAP-3410 User Manual Section 3 - Configuration Encryption: Key Type: Key Size: Key Index: Network Key: Confirm Key: Use the radio button to disable or enable encryption. (Encryption option only available with Open System setting) Select either HEX or ASCII as the key type. Select 64 Bits o...
Page 23 - Wireless LAN Settings
23 D-Link DAP-3410 User Manual Section 3 - Configuration Wireless LAN Settings Repeater Network Name: Local Wi-Fi Network Name: Authentication: Set this to the SSID of the wireless network that the DAP-3410 will be connecting to. This option can either be set to rebroadcast the wireless network that...
Page 24 - LAN Settings
24 D-Link DAP-3410 User Manual Section 3 - Configuration LAN Settings Get IP From: IP Address: IP Subnet Mask: Gateway IP Address: DNS Server Select an option to choose how the AP will obtain an IP address to use on the local network. If this is set to Static , you will need to manually enter the ne...
Page 25 - Advanced Settings; Performance
25 D-Link DAP-3410 User Manual Section 3 - Configuration Advanced Settings Performance Wireless: Wireless Mode: Data Rate: Beacon Interval: DTIM Interval Use the drop-down menu to turn the wireless function On or Off . The different combination of clients that can be supported include Mixed 802.11n ...
Page 29 - VLAN
29 D-Link DAP-3410 User Manual Section 3 - Configuration VLAN The VLAN List tab displays the current VLANs. Clicking on Create VLAN will allow you to create a new Virtual LAN with a Name and ID. The LAN ports and the Multi-SSID function can be assigned to a VLAN. Use the radio button to toggle betwe...
Page 31 - WMM
31 D-Link DAP-3410 User Manual Section 3 - Configuration WMM WMM: AC Type: Select whether to Enable or Disable the WMM functionality of the access point. A different type of data is associated with each queue. The queue and associated priorities and parameters for transmission are as follows: (Best ...
Page 33 - QoS
33 D-Link DAP-3410 User Manual Section 3 - Configuration QoS Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. A QoS Rule identifies a specific type of traffic and will adjust the amount of bandwidth used based on the settings ...
Page 34 - DHCP Server; Dynamic Pool Settings
34 D-Link DAP-3410 User Manual Section 3 - Configuration DHCP Server Dynamic Pool Settings The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed ...
Page 36 - Static Pool Settings
36 D-Link DAP-3410 User Manual Section 3 - Configuration Static Pool Settings The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless stations to receive a fixed IP without time control. Enter a name for the comp...
Page 37 - Current IP List
37 D-Link DAP-3410 User Manual Section 3 - Configuration Current IP List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools. The curre...
Page 38 - Filter
38 D-Link DAP-3410 User Manual Section 3 - Configuration Filter The Access Control filter section can be used to filter network access by machines based on the unique MAC addresses of their network adapter(s). It is most useful to prevent unauthorized wireless devices from connecting to your network...
Page 39 - Schedule
39 D-Link DAP-3410 User Manual Section 3 - Configuration Schedule Wireless Schedule: Wireless: Wireless Schedule List: Enable or Disable wireless access based on a predetermined schedule by selecting an option from the drop down box. Select whether the schedule will either turn the wireless network ...
Page 41 - DMZ
41 D-Link DAP-3410 User Manual Section 3 - Configuration DMZ Service: IP Address: Public WAN IP Address: Local DMZ IP Address: You can select either Single DMZ or Multiple DMZ . This will allow you to choose whether to expose a single IP address via DMZ, or to expose multiple IP addresses. Note: Pla...
Page 42 - Virtual Server
42 D-Link DAP-3410 User Manual Section 3 - Configuration Virtual Server Service: Description: Private IP: Protocol Type: Private Port: Public Port: Select to either Disable or Enable the rule. Enter a name for the rule. Enter the IP address of the computer on your local network that you want to allo...
Page 43 - Parental Control
43 D-Link DAP-3410 User Manual Section 3 - Configuration Parental Control Active: Comment: MAC Address: Local IP: Destination IP: Protocol: Local Port: Destination Port: Select to either Disable or Enable the Parental Control feature. You can enter a comment here for each rule that is created. Enter...
Page 44 - IP Routing; Static Routing Setup
44 D-Link DAP-3410 User Manual Section 3 - Configuration IP Routing Static Routing Setup OSPF Service RouterID: Network (Internal): Network (External): Distribute RIP over OSPF: RIP Service: Side (Devices): Distribute OSPF over RIP: Select to either Disable or Enable the AP from offering OSPF servic...
Page 46 - Maintenance; Administration Settings
46 D-Link DAP-3410 User Manual Section 3 - Configuration Limit Administrator IP: IP Range: System Name: Description: Location: Login Name: Old Password / New Password: Check this to limit administrator access to specific IP ranges only. Enter the IP address range that the administrator will be allow...
Page 49 - Firmware and SSL Certification Upload
49 D-Link DAP-3410 User Manual Section 3 - Configuration Firmware and SSL Certification Upload Update Via Local PC: TFTP Server IP: File Name: Update Via HTTP URL: Upload Certification From File: Click on Browse to locate the firmware file to be used for the update. Click on Upgrade to start the pro...
Page 50 - Configuration File
50 D-Link DAP-3410 User Manual Section 3 - Configuration Configuration File Upload File: Load Setting to Local Hard Drive: Use this option to load a previously saved configuration. Click Browse to find a previously saved configuration file. Then, click the Upload Settings button to transfer those se...
Page 51 - Ping Watchdog
51 D-Link DAP-3410 User Manual Section 3 - Configuration Ping Watchdog Ping Watchdog: IP Address to Ping: Ping Interval: Startup Delay: Failure Count to Reboot: Select whether the ping watchdog function is Disabled or Enabled . Enter the IP address that will be used for the AP to ping. Set the amoun...
Page 52 - Time and Date
52 D-Link DAP-3410 User Manual Section 3 - Configuration Time and Date Enable NTP Server: NTP Server Used: Time Zone: Daylight Saving Time: Date and Time: NTP is shor t for Net work Time Protocol. This allows the system clock to be updated automatically by using an NTP server. Enter the NTP server o...
Page 53 - PoE PassThrough
53 D-Link DAP-3410 User Manual Section 3 - Configuration PoE PassThrough Mode: Select whether the PoE pass through function is Disabled or Enabled . This page will allow you to change the PoE pass through setting of the AP. If this is enabled, the LAN port will allow D-Link surveillance cameras such...
Page 54 - Status; Device Information
54 D-Link DAP-3410 User Manual Section 3 - Configuration Status Device Information Firmware Version: Wireless: Ethernet: Device Status: Displays the access point’s time and firmware version. Also displays the current operating mode and hardware address (MAC), which may be needed by a network adminis...
Page 55 - Client Information
55 D-Link DAP-3410 User Manual Section 3 - Configuration Client Information MAC Address: RSSI: TX/RX Rate: TX/RX SEQ: TX/RX Bytes: Connect Time: Displays the MAC address of the client. Displays the client’s signal strength (received signal strength indicator). Displays the current wireless speed tha...
Page 56 - Ethernet Information
56 D-Link DAP-3410 User Manual Section 3 - Configuration Ethernet Information The DAP-3410 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is ...
Page 57 - WLAN Information
57 D-Link DAP-3410 User Manual Section 3 - Configuration WLAN Information This window displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. The traffic counter will reset if the access point is rebooted.
Page 58 - Save and Active
58 D-Link DAP-3410 User Manual Section 3 - Configuration Configuration Save and Active When making changes on most of the configuration screens it is best to use the Save button at the bottom of each screen to save (not activate) your configuration changes. You may change settings to multiple pages ...
Page 59 - Discard Changes
59 D-Link DAP-3410 User Manual Section 3 - Configuration Discard Changes When making changes on most of the configuration screens it is best to use the Save button at the bottom of each screen to save (not activate) your configuration changes. If you wish to discard all of the changes you have made,...
Page 60 - System
60 D-Link DAP-3410 User Manual Section 3 - Configuration System This page will allow you to restart the AP, or restore its settings to the factory defaults. Click the Restart button to reboot the device. Click the Restore button to reset all settings back to the factory defaults. Please note that th...
Page 61 - Help
61 D-Link DAP-3410 User Manual Section 3 - Configuration Help Further information and in depth help can be found anytime from the AP’s online help function. Scroll down the Help page for topics and explanations.
Page 62 - Wireless Security
62 D-Link DAP-3410 User Manual Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-3410 offers the following types of security: • WEP (Wired Equivalent Privacy) • WPA-Personal (Wi-Fi Protected Acc...
Page 64 - Configure WEP
64 D-Link DAP-3410 User Manual Section 4 - Security Configure WEP It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption d...
Page 66 - Configure WPA/WPA2 Personal
66 D-Link DAP-3410 User Manual Section 4 - Security Configure WPA/WPA2 Personal It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enablin...
Page 67 - Configure WPA/WPA2 Enterprise
67 D-Link DAP-3410 User Manual Section 4 - Security It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the adde...
Page 68 - Connect to a Wireless Network
68 D-Link DAP-3410 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another compan...
Page 71 - Using Windows Vista
71 D-Link DAP-3410 User Manual Section 5 - Connecting to a Wireless Network Using Windows Vista ® Windows Vista ® users may use the convenient, built-in wireless utility. Follow these instructions: From the Start menu, go to Control Panel, and then click on Network and Sharing Center . The utility w...
Page 77 - Troubleshooting
77 D-Link DAP-3410 User Manual Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-3410. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows ® XP...
Page 81 - Wireless Basics
81 D-Link DAP-3410 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Lin...
Page 84 - Where is wireless used?; Tips
84 D-Link DAP-3410 User Manual Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract peo...
Page 85 - Wireless Modes
85 D-Link DAP-3410 User Manual Appendix A - Wireless Basics Security Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how...
Page 86 - Networking Basics; Check your IP address
86 D-Link DAP-3410 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follo...
Page 87 - Statically Assign an IP address
87 D-Link DAP-3410 User Manual Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows ® 7 - Click on Start > Control Panel > Network and Internet...
Page 88 - Technical Specifications
88 D-Link DAP-3410 User Manual Appendix C - Technical Specifications Technical Specifications Standards • IEEE 802.11a/n • IEEE 802.3 • IEEE 802.3u Network Management •Web Browser Interface • HTTP - Secure HTTP (HTTPS) •SNMP v1, v2c, and v3 Security • WPA-Personal & Enterprise • WPA2-Personal &a...
Page 89 - Antenna Pattern
89 D-Link DAP-3410 User Manual Appendix C - Technical Specifications Antenna Pattern Antenna Patterns Orientation H-Plane 5 GHz Wall Mounted