D-Link d-link - Manual

DHP-541

ENGLISH

ENGLISH

Quick Install Guide

PowerLine

AV 500 4-Port Gigabit Switch Kit

Package Contents

If any of the above items are missing, please contact your reseller.

Recommendations

• For best results, use in a regular wall outlet without any other product plugged

into the same outlet. Connecting this product to a power strip or a surge

protector may adversely affect the performance of this product.

• Avoid using the PowerLine AV 500 adapters and switch in an electrical outlet

that is located near an appliance that uses a lot of power, such as a washer or

dryer, refrigerator, microwave, hair dryer, or air conditioning unit.

• To verify connectivity or if you are having connection problems, plug the

adapter and the switch in the same room to verify whether your home’s

electrical wiring is contributing to the issue. The adapter and switch’s

PowerLine LED indicators will illuminate if the connection is established.

Technical Support

Having trouble installing your new product? D-Link’s website contains the latest

user documentation and software updates for D-Link products. U.S. and Canadian

customers can contact D-Link Technical Support through our website or by phone.

United States

Internet:

http://support.dlink.com

Canada

Internet:

http://support.dlink.ca

Copyright ©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link

Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Product

specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the

packaging. Visit www.dlink.com for more details.

Version 1.0 | June 20, 2011

Step 1

Plug the PowerLine AV 500 Adapter (DHP-502AV) into an AC wall outlet near

your router. Connect the included Ethernet cable to the network cable connector

located on the bottom of the adapter and attach the other end of the Ethernet

cable to your router.

Note: Power source is confirmed when the green LED Power Indicator on the adapter

is illuminated.

Step 2

Connect the supplied power cord into the power receptor located on the back

of the PowerLine AV 500 4-Port Gigabit Switch and connect the other end to

an AC wall outlet (do not plug into a power strip or surge protector) in the

same room as your DHP-502AV in order to verify whether your home’s electrical

wiring is suitable for a PowerLine network. Once configured you may place your

DHP-540 in the location of your choice. Press the power button to the ON

position on the DHP-540 located on the back.

Note: Power source is confirmed when the green LED Power Indicator on the

DHP-540 are illuminated. Network Connectivity is confirmed when the PowerLine

and Ethernet LED indicators on both the DHP-502AV adapter and DHP-540 switch

are illuminated.

Hardware Installation

Note: For hardware overview, please refer to the user manual.

Your Network Setup

Note: A minimum of 2 D-Link PowerLine AV devices are required to create a

PowerLine Network.

Step 3

To secure the PowerLine Network from unauthorized users, press the Simple

Connect Button on the DHP-502AV adapter for 2 seconds. Then, press the Simple

Connect Button on the DHP-540 switch (located on top) for 2 seconds. This must

be done within two minutes after pressing the Simple Connect Button on the

DHP-502AV adapter. The PowerLine LED on both DHP-502AV and DHP-540

should blink.

Note: Network connectivity is confirmed when the PowerLine and Ethernet LED

indicators on both the DHP-502AV adapter and the DHP-540 switch are illuminated.

5V - - - 3A

1

2 LAN

3

4

INTERNET

USB

RESET

INTERNET

Wireless Router

Cable/DSL

Modem

TV

Blu-ray DVD Player

Game Console

NAS Storage

DHP-540

(included)

DHP-502AV

(included)

Two Ethernet Cables

CD-ROM (Includes User Manual and Software)

One PowerLine AV 500 4-Port Gigabit Switch (DHP-540)

Power Cord (for DHP-540 Switch)

One PowerLine AV 500 Adapter (DHP-502AV)

Step 4

After the network security setup is completed, your PowerLine network will

be securely configured with the same network encryption key. Place the

DHP-540 switch in a different location in your home. The DHP-540 will retain the

security settings even if it is unplugged. Connect the included Ethernet cable

to the network cable connector located on the DHP-540 switch and attach the

other end of the Ethernet cable to a game console, NAS device, media player,

Internet TV or computers.

Thank you for purchasing the PowerLine AV 500 4-Port Gigabit Switch Kit. Follow

the easy steps in this guide to properly set up your PowerLine network. Please

verify that all the package contents listed below are available.

DHP-540 Switch

Simple Connect Button

DHP-502AV Adapter