Curtis WF-037a - Manual - manualsarea.com

Page 2 - Open view image with major parts indication

Page 5 - Getting to know your Scouting Camera

Getting to know your Scouting Camera 1. Package contents. Please check if the following items are in the package when purchasing this product. • CDROM (Contented with Ulead PE 8 and driver) • User Manual. • 1.5M USB cable. • 1.5M TV out cable for TV (RCA Jack). • Strap. Installation. 1. Preparation....

Page 8 - Battery and SD memory card installation.; Open the front cover.; OFF; Open the battery door.; An image to shown how to locate the battery

3. Battery and SD memory card installation. • Open the front cover. • Slide the power switch to OFF . • Open the battery door. • Put the battery with correct directions. • Close the battery door. ¾ Alkaline batteries should be used and please make sure the batteries polarity is correct. An image to ...

Page 9 - An image to show how to locate the SD card

• Push the SD memory card in to the SD card slot till the end and in the correct direction as shown. • To remove the SD memory card by press the SD card to the end, the SD memory will eject from the SD card slot. • Slide the power switch to on. An image to show how to locate the SD card

Page 14 - Controls.

Please replace with new batteries; otherwise the camera will not work properly. • Day and Time: It shows the date and time that you have set. 2. Controls. • Change the display mode to Preview: By pressing and hold the [CONFIRM] button 2 seconds to switch the TFT display mode to Preview, the TFT disp...

Page 15 - Wake up the unit during PIR detection.; wake up the unit inter preview.

• Wake up the unit during PIR detection. By pressing the [UP] or [DOWN] button 2 seconds to wake up the unit inter preview. 3. Settings on Preview. Set the functions during TFT in preview status. 3.1 Set the Capturing mode: • Power on the unit, press the [MENU] button to call out the menu. • Press [...

Page 18 - Press the [CONFIRM] to select the TIME or DATE

• Press the [UP] or [DN] to set the TV output in NTSC or PAL system. • Press [CONFIRM] to confirm, then press [MENU] to exit. 3.5 Set Date and Time. • Power on the unit, press the [MENU] button to call out the menu. • Press the [UP] or [DN] button to move the highlight to DATE AND TIME. • Press [CON...

Page 20 - Mounting the Camera with the supplier strap.; Insert the strap through the strap slots on the rear

• Press the [CONFIRM] button to enter the DELETE ALL. • Press the [UP] or [DN] button to select YES or NO • Press [CONFIRM] to confirm the deleting or exit. • All the captured images will be delete from unit. ¾ Once Delete, Delete All or format has been selected, the data or images will be deleted f...

Page 24 - Using the camera in PIR detection mode.

minute to leave the coverage area. Then the camera will enter PIR detection mode. b. After 5 minutes in test mode, the camera will then enter count down mode for 1 minutes and the front green indicator will start blinking giving you one minute to leave the coverage area. The camera will enter PIR de...

Page 26 - the

lighting conditions. If the lighting conditions are not enough, unit will switch the AVI to single image capturing automatically. ¾ When using the AVI function, the camera cannot use the flash. Time/Date stamp will not appear on the AVI video clips. 5. Viewing the images. The Scouting Camera offers ...

Page 27 - Viewing the images on your home TV equipped with

• A TV icon will appear on the TFT display. • Turn on the Monitor. • Image will be display on the TV screen. • At the bottom of the screen will be an information bar that indicates what picture out of the total stored in memory you are viewing. • It also displayed captured data and time. • Using the...

Page 28 - Viewing the images on your computer using the

• A TV icon will appear on the TFT display. • Turn on the TV and select source to video in. • Image will be display on the TV screen. • At the bottom of the screen will be an information bar that indicates what picture out of the total stored in memory you are viewing. • It also displayed captured d...

Page 29 - Using the external power.; To use the external battery pack power.; Please make sure the voltage and polarity are

• Plug the other end of USB cable into the camera. The camera will automatically power ON and display a USB icon on the LCD screen. • At the same time, your computer will recognize the camera as mass storage device and found under MY COMPUTER. • Clip to open this device and using the provided applic...

Page 30 - care

correct before connection. Incorrect voltage or polarity will damage the camera. If you are not sure, please contact your retailer. Maintenance 1. Storing conditions. • Operating Environment: 41 to 104 deg F (5 to 40 deg C). 20-85% relative humidity, non-condensing. 2. Special care instructions!! • ...

Page 31 - Troubleshooting and Hints

container when it is NOT used. • Take the batteries out, when the Scouting Camera is NOT to be used over a long period. • Avoid dropping the Scouting Camera on to hard ground. Do not to disassemble the Scouting Camera. • Do not mix new and old batteries. • Do not open the camera for unauthorized ser...

Page 32 - FORMAT

bit) or above: • Click the Windows Start button. • Click settings and then Control Panel from the pop- UP MENUs. • Double click the Display icon. • Click the Setting tab. • Please select to High Colour (16 bit) or True Colour (24 bit). Then choose High Colour or True Colour from the list box. • Clic...

Page 33 - Camera spec and system compatibility.; System Requirements and Compatibility.

• You have used the SD card in other digital devices (the format of the SD card might have changed when using other devices due to un-standard formats). Camera spec and system compatibility. 1. System Requirements and Compatibility. • Windows 98/98se/2000/Me/XP. • P 450MHz or equivalent processor. •...

Curtis WF-037a - Manual

Table of Contents:

Summary

Other Curtis Models